Construction of 11 KV Line and sub Station against package no. 315 and 314/24-25 against Deposit Scheme under jurisdiction of EDD, Dubagga, Lesa, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

TF 250 KVA

ACSR WEASEL CONDUCTOR

11 KV XLPE Cable 3x120 sq.mm.

11 KV OUTDOOR 1X120 SQ.MM.

TOP CHANEEL

DROPPER CHANEEL

MS CHANEEL 100X50X50 MM

PCC POLE 8.5 MTR. LONG

LT XLPE CABLE 1X400 SQ.MM.

11 KV DISCK INSULATOR

11 KV DISCK FITTING

INSULATOR

Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST/PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only centralized material will be Provided by the Department.

Well type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm long) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type Tailless Fuse Unit, 3 Nos copper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Supply and fixing of Aluminum Lug for 250 KVA TF as per RESPO Norms.

Supply and fixing of Copper L-Piece for 250 KVA TF as per RESPO Norms.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Laying of LT XLPE Cable 1x400 sq.mm. as per RESPO Norms. Only cable shall be supplied by department.

Digging of pit suitable for 3x120 sq.mm 11 KV XLPE cable laying. After 11 KV XLPE cable laying refilling by Bricks & sand as Per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

Cable Hosting of 11 KV 3x120 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

High pressure testing of 11 KV 3x120 XLPE cable along with arrangement of High Pressure equipment.

GST Extra as per Rules

M/s CHAUHAN ELECTRICALS

VIBHU ENTERPRISES