REPAIR/ RECTIFICATION OF DAY TO DAY COMPLAINT AND WELCOME MAINT OF MD/ SINGLE ACCN IN OTHER THAN MH AREA UNDER GE(U) E/M MEERUT CANTT.

Taking down steel tubing and connections,15 mm dia bore pipes omplete all as specified and as directed.

-Ditto- all as above item ser No 01 but 20mm dia of pipe omplete all as specified and as directed.

Refixing old steel tubing and connections in new or old position of 15 mm dia bore of pipe complete including cleaning all as specified and as directed.

-Ditto- all as above item ser No 3 but dia of pipe 20mm bore complete all as specified and as directed.

S&F 15mm dia GI Tubing medium grade with all fittings fixed complete to walls and ceiling or laid in floors omplete all as specified and as directed.

All as above item ser No 5 here-in- before but dia of pipe 20mm bore complete all as specified and as directed.

S&F in repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

S & F in repairs Brass chromium plated wall mixer for mixing hot or cold screwed down high pressure with or without lettered `' with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm dia bore pipe.

S & F in repairs Brass chromium plated Basin mixer for mixing hot or cold screwed down high pressure with or without lettered `' with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15 mm dia bore pipe.

S/F in repairs plain sheet glass 3.00mm thick glazing with oil putty n.exc 0.50Sqm in each pane complete all as specified and as directed.

S/F in repairs frosted glass 3.00mm thick obscured or figured on one side & glazing with oil putty n.exc 0.50Sqm in each pane complete all as specified and as directed.

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beat in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed.

S&F in repairs 25 mm mild steel curtain rods fixed with brackets complete all as specified and directed.

S&F mild steel brackets for 25mm dia for curtain rails complete all as directed.

S & F in repair Brass Chromium plated shower rose of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F in repair moneky proofing galvanised/MS water tank cover for 500/1000 ltr tanks with fixing all arrangements complete all as specified and as directed.

S & F in repair pvc waste pipe for WHB /sink with fixing all arrangements complete all as specified and as directed.

S & F in repair stainless steel Toilet paper holder with fixing all arrangements complete all as specified and as directed.

S & F in repair stainless steel towel ring with fixing all arrangements complete all as specified and as directed.

S & F in repair vitreous china wash down water closet pan EWC (pedestal pattern) white incl fixing bolts & seat cover etc but excluding flushing cistern and flush pipe complete all as specified and directed

S&F, PVC cabinet fancy type of size 460mmx360mm with looking mirror complete(make-PRAYAG/COMMANDER, NILKAMAL).

Taking down chowkats with shutter (Without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats with shutter (Without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed.

Taking down shutter exc 1. Sqm but not exc 2 sqm each complete all as specified and as directed.

Taking down shutter exc 1. Sqm but not exc 2 sqm each with refixing in same opening with all fittings complete all as specified and as directed.

S&F aluminum anodised window and ventilator shutter sliding type two track with or without sash bars , with aluminum section weighing not less than 0.55 Kg per Sqm including necessary joining cleats , glazing clips, rubber packing, aluminium Snap beading , screws, aluminum fittings, suitable handles complete . (Note:-Glass shall be measured and paid seperately).

Supply and fixing aluminum anodized door shutters, powder coated of any colour (thickness of powder coating not less than 50 Micron) side hung type, without sash bars, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodised aluminium fittings,5.5mm thick ordinary plain glass ( Glass make-Saint Gobain/Modi Guard/Atul) complete all as specified.

S & F Aluminium chequered grill with aluminium anodized of diamond shape with 6 mm wires and mesh of size 75 x 75 mm in aluminium 'Y' channel and aluminium flat 25 mm wide fixed with aluminium screws complete all as specified.

S & F anodized aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing.

S7 F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F, 35mm thick 2nd class hard wood glazed & skelton shutters, open repeated & prepared to receive glass, gauze etc. without sash bars, edges of framing plain, chamfered or rounded, fitted with cut or mitered beads for securing glass etc, sizes of members of shutters as specified in SSR part I, section 8, clause 8.24(a) Complete all as specified and as directed

S&F for 30mm thk flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

S&F 150mm long stainless steel , tower bolt of extruded section complete all as specified and as directed.

S&F in repair 150mm long stainless steel handle complete all as specified and as directed.

S&Fl butt hinges medium weight, colled rolled mild steel 100 mm long complete all as specified and as directed.

S&F 250mm long stainless steel sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section.

S&F in repair 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

S&F 250mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding and backing, complete all as specified.

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.

S&F in repairs PVC low/high level flushing cistern white 10 ltrs capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. ( Note Removing existing flushing cistern of CI or any other type incl brackets and make surface good).

S&F In repair bib taps chromium plated, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.

S&F in repair stop valves chromium plated, screwed down hgh pressure, screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe complete all as specified and as directed.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm, white with integral foot rests excluding flushing cistern & fush pipe fixed in repairs incl P or S trap complete all as specified and as directed.

S & F in repairs PVC Connection 15mm size with PTMT Nuts of length 450mm complete all as specified and as directed.

S and F in repair stainless steel sink 1 mm thick for kitchen, with plug waste pipe washers incl cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling complete all as directed.

S&F stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed..

S/F in repairs Vitreous china wash basin white flat back size 580x 450mm including ,pedastal type waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S&F in repairs pillar taps fancy type, with capstain heads, chromium plated, screwed down high pressure , with or without lettered HOT or Cold with long screwed shanks and fly nuts , srewed for iron pipe and fixed 15 mm dia of pipe all as specified.

M&L for PVC nahani trap incl jointing to waste pipe fixed in cement conc 1:2:4, type B2 75mm dia with gratings including taking down old broken traps complete all as specified and as directed.

S&F in repair 500 Litres capacity rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl dismantling of existing unserviceable PVC water tank complete all as specified and directed.

S&F in repair 1000 Litres capacity rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl dismantling of existing unserviceable PVC water tank complete all as specified and directed.

S&F in repair 20mm ball valves, high pressure, with polythene float valve and flynut complete, screwed for iron pipe or brass ferrule and fixed complete and all as specified by Engr-in-Charge.

S&F in repairs aluminium door closer hydraulically regulated (extruded section body) designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified & directed.

S&F in repairs mild steel 300mm,door spring ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed

S&F in repairs 30 mm when Continuous (piano) hinges, mild steel, bright finish or electrogalvanised.

S&F in repairs 18/19mm thick prelaminted partcile board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws, including teak wood lipping 19x6mm thick fixed with nails in shelves, partition and pelmet boxes, cupboard shelves etc all as specified and directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed.

S&F In repair Push cock with sprinkler flush for urinal pot completed all as specified and directed.

S&F in repairs for Toilet fittings Two way bib cock of 15mm bore complete all as specified and directed by Engr-in-Charge

S&F in repairs for Toilet fittings Corner Glass shelf with bracket complete all as specified and directed by Engr-in-Charge

S&F in repairs for Toilet fittings Glass shelf with bracket complete all as specified and directed by Engr-in-Charge

Petty repairs/adjustment to washer/ syphon etc for high level or low level flushing cistern including replacement of washer, check nuts pluger etc any type of flushing cisterns,Joint between flushing pipe and socket of W.C. pan; pre-made and making functional all as directed by Engr-in-Charge.

Material and Labour for petty repair to bib taps, piller taps, stop cocks, connected stop valves, wall miixture,basin mixture etc or of similar article of any description by replacing the nylon washer, jumping washer, brass spindle ,nipple where required, all as specified and directed. Note:- (i) One Job will consists of 4 different complaints at same or different locations , or part thereof for measurement purpose.. (ii) Complaint(s) should be rectified within a day, if not attened/ rectified, a panelty Rs.100/- per day/ per complain will be recovered. (iii) Contractor or his rep will collect the complaints from JE/ Engr-in-Charge 0900 hrs to 1000 hrs on all working day. (iv) Contractor will maintain register of complaints and obtain signatutre of user after rectification of complaints. (v) Register of complaints will be kept in record by Engr-in-Charge.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.

M&L brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water all as specified.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair extra cement, all as specified .

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair extra cement, all as specified .

M&L for applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.Make:-Apex Ultima protect/Berger paints(weather coat smooth)).

M&L for new plastered surface applying two coat of oil bound distemper using roller for painting complete all as specified and directed.

M&L for 05 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, all as specified .

M&L for prepration of new surfaces including cornices, pilasters etc(Plastered or unplasterd surfaces) and applying three coats of white (Lime) wash on ceiling complete all as specified.

M&L preparing old cement base paint surfaces of walls by washing, rubbing down and stopping of surfaces and applying two coats with cement base paint , white or tinted including and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

complete removal of existing treatment for Preparing old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified(Make-Apex Ultima protect/Berger paints(weather coat smooth)).

M&L preparation of old decorated distempered plastered/ umplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of distemper oil emulsion of any tint/shade complete all as specified.

M&L preparation of old plastered /unplastered surfaces of walls by applying 1 mm thick Wall care white ( Putty) and sand papering surfaces to achieve smooth surfaces and applying distempering with distemper oil emulsion , two coats, white or tinted over a coat of alkaline resisant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.

M&L for prepration of new surfaces of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified.

M&L for prepration of old steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.

Labour only cutting of vegitation or grass and up rooted tree upto 30cm in girth, shrubs, bushes and removing rubbish up to a distance of 500 mtrs from the bldg/walls/terrace etc and all as directed by Engrs-in-charge.

Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches , ceilling roses , holder , tube light , bulk head , pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces , wall, floors etc.)

M& L of Point wiring for one light point / fan point or bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLS , Multistranded copper conductor cable as in and including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, mediun duty for one light, fan, bell pioint controlled by one switch including sunken steel boxes of suitable size with 3mm thick plastic laminated backelite sheet including FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour ) as continious earth wire and connecting to earth dolly, and making good to distrub surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces.

All as per Sl item No 2 here in before but point wiring in existing PVC Conduit Pipe

All as per Sl item No 2 here in before but wiring with FRLS , Multistranded copper conductor cables in PVC Casing and capping Note : Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

M& L of Point wiring for one 2 way light point/ fan point/ bell point etc controlled by 2 way switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate size not less than 20mm dia,and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified.

All as per Sl item No 5 here in before but point wiring 2 way in existing PVC Conduit Pipe

M& L of Point wiring for one socket outlet 5 Amp 3/5 pin for independent board etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate size not less than 20mm dia,and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified.

All as per Sl item No 7 here in before but for one 3 pin 5 amps socket outlet independent board in existing Conduit.

All as per Sl item No 7 here in before but for one 3 pin 5 amps socket outlet independent board in PVC casing & caping all as specified and directed. Note: Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

All as per Sl item No 7 here in before but for one 3 pin 5 amps socket outlet on the same board with other switch.

All as per Srl item No. 7 above but for one 15 Amp independant socket outlet point using 2.5 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earth wire connecting to earth dolly .

All as per Sl item No 12 here in before but for 15 Amp socket outlet in existing PVC Conduit Pipe

All as per Sl item No 12 here in before but for 15 Amp socket outlet in in PVC casing & caping all as specified and directed.Note: Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.casing/coping

All as per Srl item No. 12 above but for metal plug top AC/Geyser point using 4.0 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia, incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly .

All as per Sl item No 12 here in before but for AC/ Geyser outlet in existing PVC Conduit Pipe

M & L for Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed.

M&L for two way switch piano, flush button, single pole two way 16 amps 240 Volt with polycarbonate body complete all as specified and directed.

M&L for Bell push switch piano flush button single pole one way 5 Amps 240 volts with polycarbonate body.

S&F for multi socket outlet for 2 &3 pin, 6A, flush type complete all as specified and directed.

S&F for socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.

S&F for switch piano, flush type, single pole, one way, 16 Amps 230Volts complete all as specified and directed.

S&F for stepped type electronic mini /delux fan regulator 100 watt rotary step all as specified and directed.

M&L for modular point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FRLS PVC insulated unsheathed ,FRLS , multistranded copper conductor cable 1100 volts grade in and including non metallic rigid PVC medium duty concealed conduit with wall thickness not less than 20 mm dia including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC green insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed by Engineer-in-Charge.

Description all as per srl item No. 23 here-in-before but point wiring controlled by one module one switch in existing PVC Conduit Pipe

Description all as per srl item No. 23 here-in-before but for two way switch, complete all as specified and directed.

Description all as per srl item No. 23 here-in-before but point wiring controlled by one module two way switch in existing PVC Conduit Pipe

Description all as per srl item No. 23 here-in-before but for 5 pin 5 Amps socket outlet on independent board controlled by one switch 5 Amps one way, complete all as specified and directed.

Description all as per srl item No. 23 here-in-before but for 5 pin 5 Amps socket outlet on independent board controlled by one switch 5 Amps one way in existing conduit, complete all as specified and directed.

Description all as per srl item No. 23 here-in-before but for 5 pin 5 Amps socket outlet on same board controlled by one switch 5 Amps one way, complete all as specified and directed.

Description all as per srl item No. 23 here-in-before but for 5 pin 5 Amps socket outlet on same board controlled by one switch 5 Amps one way in existing conduit, complete all as specified and directed.

Description all as per srl item No. 23 here-in-before but for 16 Amps socket outlets point using4.00 Sqmm FRLS PVC insulated multistranded copper conductor cable including 4.0 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth wire in existing conduit complete all as specified and directed.

M&L for one Module switch 1 way 10 Amps 240 volts all as specified and directed.

M&L for one Module switch 1 way 16 Amps 240 volts all as specified and directed.

M&L for Moduler bell push 6A, 240 volts 1 Module all as specified and directed.

M&L for Modular two way switch 6A, 240 volts 1 Module all as specified and directed.

M&L for Modular socket 6A, 240 volts 2/3 pin 2 Module all as specified and directed.

M&L for Modular socket 6A/16A , 240 volts 2/3 pin 2 Module all as specified and directed.

M&L for Modular Fan step regulator 120W , 240 volts 2 Module all as specified and directed.

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

Supply & fixing lamp holder (Angular/Straight), insulated body, with back plate for batten fitting complete all as specified & directed

Supply & fix in repair of wall mounted 1x20 watt LED 6500K tube light fittings (4 feet long), with higher efficiency Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate T5 LED batten AC 230-240V 50Hz with PMMA/PC diffuser , environmental friendly, energy efficient 100 Luman /watt with minimum 3.5 5 KV voltage surge protection Power factor> 0.9, all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

Supply & fix in repair of wall mounted 1x10 watt LED 6500K tube light fittings (2 feet long),indoor Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate T5 LED batten AC 230-240V 50Hz with PMMA/PC diffuser , environmental friendly, energy efficient 100 Luman /watt with minimum 3.5 5 KV voltage surge protection Power factor> 0.9, all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

S & F in repair of Recess mounted economical LED panel light 2`X2` 36/40 watt Deep drawn CRCA sheet steel housing duly power coated in slim housing with high quality opal diffuser for uniform light with IP20, 100lm/w housing of pressed aluminium sheeet with complete all as specified and directed.

Supply and fix in repair LED post top Lantern with die cast aluminium spigot gate light 45 Watt with spun aluminium housing and pressure die-cast spigot. Clear milky diffuser for uniform bright light, efficacy 95lm/watt, with IP65 degree of protection & impact resistance complete all as specified and directed.

S&F LED Bulk Head Fitting 10 Watt housing made of PDC aluminium with opal diffuser corrosion resistant unbreakable PC with high quality diffuser for glare free Aesthetically designed gaskit IP65 protection, efficacy 95lm/watt complete all as specified and directed.

S&F in replacement of LED Bulk Head Fitting 10 Watt housing made of PDC aluminium with opal diffuser corrosion resistant unbreakable PC with high quality diffuser for glare free Aesthetically designed gaskit IP65 protection, efficacy 95lm/watt complete all as specified and directed.

Supply and fixing of decorative wall light white in colour made up of poly carbonate suitable for 9 watt retrofit LED Lamp complete all as specified and directed.

Supply and fixing in replacement of decorative wall light white in colour made up of poly carbonate suitable for 9 watt retrofit LED Lamp complete all as specified and directed.

Supplying, fixing in replacement LED Security light including connecting and testing of energy saving & environment friendly, made out of pressure die cast aluminium housing with toughened glass cover housing, 45 watts LED to achieve electrical safety class 1, Pf >0.95, lumens >110 lm/W, Ingress protection not less than IP66, including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed.

M&L of Bell, Ding Dong AC. 230 volts, single pole all as specified.

S & F in replacement of Bell, Ding Dong AC. 230 volts, single pole all as specified.

S & F in replacement sheet metal enclousers single pole and neutral 240 volt , 20 Amps with two pin and earth plug and socket plug top complete with single pole MCBs all as specified and directed.

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated busbar of 8- way, 240 volts complete all as spd and directed.

S&F in repair PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 Sqmm for providing necessary electrical connection from junction box to light fittings including with suitable size copper lugs complete all as specified and as directed by the Engr-in-Charge.

M & L for sub main wiring with 1.5 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

M & L for sub main wiring with 2.5 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

M & L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

Supplying and fixing in replacement 10 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two twin core cable flat or circular complete all as specified and directed.

Supplying and fixing in replacement 6 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, two twin core cable flat or circular complete all as specified and directed.

Supply & fixing in repair MCB , SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing in repair MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing in repair MCB, TPN, 415 volts of 100 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed

Supply & fixing in repair MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Supply & fixing in repair MCB DB Box 4 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Supply and fix in repair metal clad socket 20 Amp 2P+E, 230 volt AC complete all as specified and directed

M & L in repair for LED Bulb 12 watt 240 volt

Supply and fix in repair metal clad plug 20 Amp 2P+E, 230 volt AC complete all as specified and directed

Supply & Fix in replacement LED Emergency LED B-22 cap with opal Diffuser, Wattage 10W, Voltage /frequency 220-240V/ 50-60Hz, Cool Day light, PF > 0.9 CCT 6500K, upto 4 Hrs Back up all as specified and directed by Engineer-in-Charge.

Supply & fix in repair casing caping 25 mm complete all as specified

Supply & fix in repair casing caping 15 mm complete all as specified

Supply & fix in repair flexible conduit 25 mm complete all as specified

Supply & fix in repair flexible conduit 32 mm complete all as specified

M&L for Attending the complaints for checking of existing electrical fittings and fixtures in qtrs at sectors area for continuous electric supply including carrying out minor repairs etc as required to make the items functional and replacing tube rods, , Lamp older ,ceiling rose, switches, Hylum sheets ,sunken steel boxe, DB 8 way,MCB TPN, MCB SPN,MCB SP etc as per suitable size and capacity at site all as specified and directed by Engineer-in-Charge. Note :-(a) One job will consists of 4 different complaints at same or diffrent locations,or part there for measurement purpose. (b) contractor or his rap will collect the complaints from JE/Engr-in charge 0900 hrs to 1000 hrs on all working day. ( c) Contractor will maintain register of complaints and obtain signature of user after rectification of complaints. (d) register of complaints will be kept in record by Engr-in Charge. (e)Item provided in above complaints shall be measured and paid seperatly.

Supply only Hylum sheet 3 mm thick of 9"x5" size for fix suitable PT switches/sockets/regulator

Supply only Hylum sheet 3 mm thick 9"x7" size for fix suitable PT switches/sockets/regulator

Supply only hylum sheet of size 5"x5" including cutting to required shape for fixing of existing switches and sockets completeall as specified and directed.

Supply only hylum sheet of size 8"x5" including cutting to required shape for fixing of existing switches and sockets completeall as specified and directed.

Supply only hylum sheet of size 10"x12" including cutting to required shape for fixing of existing switches and sockets completeall as specified and directed.

Supply only hylum sheet of size 8"x10" including cutting to required shape for fixing of existing switches and sockets completeall as specified and directed.

Supply only sunken steel boxes zinc oxide plated of size 4''x4'' including cutting the wall to required shape for fixing and making good the disturbed surfaces to match existing one complete all as specified and directed.

MSupply only sunken steel boxes zinc oxide plated of size 7''x4'' including cutting the wall to required shape for fixing and making good the disturbed surfaces to match existing one complete all as specified and directed.

Supply only sunken steel boxes zinc oxide plated of size 9''x11'' including cutting the wall to required shape for fixing and making good the disturbed surfaces to match existing one complete all as specified and directed.

Supply only sunken steel boxes zinc oxide plated of size 7''x9'' including cutting the wall to required shape for fixing and making good the disturbed surfaces to match existing one complete all as specified and directed.

Supply only wall mounted 1x20 watt LED 6500K tube light fittings (4 feet long), with higher efficiency Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate T5 LED batten AC 230-240V 50Hz with PMMA/PC diffuser , environmental friendly, energy efficient 100 Luman /watt with minimum 3.5 5 KV voltage surge protection Power factor> 0.9, all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

MSupply only Modular two way switch 6A, 240 volts 1 Module all as specified and directed.

SSupply only Modular socket 6A, 240 volts 2/3 pin 2 Module all as specified and directed.

Supply only ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

Supply only lamp holder (Angular/Straight), insulated body, with back plate for batten fitting complete all as specified & directed

Supply only MCB , SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply only MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply only MCB, TPN, 415 volts of 100 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed

Supply only MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Please Enable Macros to View BoQ information