M o various colonies under Nazul A/cII Dwarka zone

Operation Running maintenance & operation of 82.5 KVA D.G set, Fire Fighting System, Fire alarm & P.A. System, Ventilation & liftwell pressurization system and General Lighting i/c operation of lift as per terms and condition attached.

Material Supplying, installation, Testing & Commissioning of 20W LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency>85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80,Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved byEngineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).

Servicing of 82.5 KVA D.G. set (Kirloskar make) i/c S/R of following parts/accessories, cartage testing on load etc complete as reqd. (Servicing of D.G. set has to be got done through authorised dealer of OEM) i) Oil filter --- 1 No. ii) Diesel filter (pre-micro)--- 1 set iii) Air cleaner elements --- 1 No. iv) K-cool superplus- 50-50 premix ---- 15 ltr. v) K-oil premix --- 15ltr, vi) Labour charges for servicing, functioning and testing--- 1 job vii) Radiator cleaning charges --- 1 job i/c removal & refixing

Supplying and replacement of 1200 mm sweep size ceiling fan i/c connection, testing etc complete as reqd.

Supplying & replacement following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, testing etc. complete as required. i/c Rebate for dismantle material a) 250 A,36KA,FPMCCB (Ics=Icu)

Supplying and Replacement of 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i/c Rebate for dismantle material a) SP MCB

b) DP MCB

Supplying and Replacement following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 amps switch

b) 3 pin 5/6 A socket outlet

c) 15/16 A switch

d) 6 pin 15/16 A socket outlet

Supplying and Replacement two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required i/c rebate for dismantle material.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 1 x 1.5 sq. mm

b) 2 x 4 sq. mm

Supplying and Replacement of 300 mm sweep extra size metallic exhaust fan i/c connection, testing etc complete as reqd.

Please Enable Macros to View BoQ information