Special repair to bldg No P-81 of 515 ABW under GE(South) Bangalore

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:6

Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement).

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 incl finished even and smooth (without using extra cement).

M&L for preparation of new plastered surfaces of walls including and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion white or tint over primer with 1mm wall putty on plastered surface complete all as specified.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion white or tinted over primer with 1mm wall putty on plastered surface complete all as specified.

M&L for complete removal of existing treatment by wire brushing, rubbing down with water of old painted surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer over 1 mm thick birla wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings complete all as specified and directed.

M&L for preparation of old distempered surfaces of ceilng and applying one coat of oil bound distemper all as including cleaning splashes of distmeper on floor/objects etc complete all as specified and directed.

M&L for complete removal of existing treatment of old treated surfaces of walls including washing, rubbing etc. and aapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises.

S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed in cement mortar 1:6 all as specified and as directed

S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick plaster in cement mortar 1:4 all as specified and as directed

S&F coloured anti skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.

S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CP 1:4

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete all as specified and directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area not exceeding 2.00 sqm each opening

All as per Item No 21 above but openable type with two shutters including glass and mesh Note - Net opening size will be measurement for payment.

All as per Item No 21 above but fixed type

S&F sheet glass 4.8mm thick ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide.

S&F 40 mm thick laminated flush shutters, solid core construction, with block board core and plywood face panels, lamination both sides with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F 30 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified and as directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge

M&L for 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.

M&L for 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.

S&F Butt hinges 100mm, medium weight, cold rolled mild steel all as specifed and as directed.

S&F stainlees steel 150mm door handles with stainless steel screws all as specified and as directed.

S&F stainlees steel 150mm tower bolt with stainless steel screws all as specified and as directed.

S&F stainlees steel 250mm sliding door bolt with stainless steel screws all as specified and as directed.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F in repairs alumiium cast type Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg

M&L for fabrication cabinets, cupboards etc of openable shutters, shelves partitins, drawers etc made up of 22mm solid core BWR ply choice lamination on the both faces, each shutter having a pair of self closing hinges or continous hinges as approved, stainless steel fancy handles, tower bolt and other fittings as directed, taking down old cabinets, S&F wood frame etc complete all as specified and as directed. Note - 1. Surface area of each member is measured flat for payment. 2. S&F of all necessary hardware deemed to be inclusive in quoted rates.

S&F in repairs 18mm thick choice laminated one side and other side plain laminated solid plywood (water proof) as in kitchen cabinets jointed with marine grade adhesive and fixed with stainless steel screws including all fittings as required in kitchen/kitchen cabinets all as specified and as directed.

S&F 6mm thick bakelite sheet of approved make and colour fixed in back of kitchen cabinet or wardrobe joned with epoxy based adhesive and fixed with stainless steel screws on plastered surfaces of wall as specified and as directed.

S&F in repairs stainless steel basket 18'x8" of approved shape and utilization (for Plates, cutlery, container etc) for kitchen including 2 Nos of channels for each basket Make - Godrej, Platinum, IQRA

All as per Item No 42 above but size 18'x6"

S&F in repairs soft close revolving storage basket swing tray for cabinet blind corner of approved shape and purpose all as specified and as directed. Make - Godrej, Platinum, IQRA or equivalent as approved by GE

S&F in repairs stainless steel container basket of approx capacity 20ltr for kitchen including 2 Nos of heavy duty channels all as specified. Make - Godrej, Platinum, IQRA or equivalent as approved by GE

Supply and laying of 20 mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in tfloors Iincluding taking down old tubes 20mm dia, complete all as splecified.

All as per Item No 46 above but 25mm dia including taking down 25mm dia pipe all as specified and as directed.

S&F in CPVC brass threaded elbow 20 mm fixed with all as specified.

S&F CPVC brass treaded Tee 20 mm all as specified.

S&F in repair 15 mm bore fancy type bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F in repair 15 mm bore diameter CP bib taps suitable for Washing Machine with crutch or butterfly handle,screwed down, screwed for pipe or for brass ferrule complete all as specified and directed.

S&F in repairs angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed both ends for iron/CPVC pipes or for unions complete all as specified and directed.

S&F in repairs fancy type wall mixer of brass, chromium plated, 3 in 1 system with hot and cold arrangement all as specified and as directed.

S&F in repairs CP Toilet paper holder fancy type 150mm Size with brackets complete all as specified.

M&L in repairs Health Faucet 15mm size, brass CP, with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified .

S & F PVC connection 15 mm dia with PTMT nuts of length 450 mm.

S&F in repair 32 mm dia PVC waste pipe for sink and WHB of suitable length complete all as specified.

M&L for towel ring 200-250mm dia made of heavy duty stainless steel pipe or chromium plated all as specified and as directed.

S&F 304 grade stainless steel folding towel rack 24 inch, curved design, wall mounted type, chrome finish including 4 nos hook, 01 towel rod supported with wall flats, tubular pipes fixed with chromium plated concealed screws complete all as specified.

S&F in repairs Glass corner shelf including CP railing, radius 250 mm complete all as specified and directed.

S & F in repairs beveled edge looking mirror of 5.5 mm thick of approved size with chromium plated brass screws concealed with chromium plated polished caps as approved complete all as specified & directed.

S & F in repair vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling 32mm dia etc.

S&F in repairs EWC with integral flushing cistern of vitrous china (one piece) white or coloured including fixing bolts and flush pipe, seat cover, hinging device, 'P' or 'S' trap WC connector etc, complete all as specified and directed .

S & F in repair vitreous china washdown water closet pan & trap (EWC) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan incl all joints incl connection to drain pipe and flush pipe.

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified.

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

M&L for 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repairs Swivel shower rose 15mm of brass chromium plated 150 mm dia round with shower arm of 190mm Long Light Body complete all as specified and directed .

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repairs stainless steel medium weight curtain rods 25 mm dia including approved support bracket and a pair of polished end knobs for each rod fixed with stainless steel screwsall as specified .

S&F Stainless steel polished wall brackets for holding curtain rod medium weight all as specified.

S&F in repairs Stainless steel polished end knobs spherical in shape suitable for 25mm rodall as specified.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 405mm x 355mm x 178mm (minimum), including PVC waste pipe 40 mm dia complete all as specified and directed.

M&L Machine cut cudappah stone slab 40mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab or laid dry including rubbing and polishing complete all as specified and as directed.

M&L for 20mm thick approved granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like with and including cement screed (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Providing edge moulding to granite stone of any description 18-20mm thick stone of counters, steps, vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

M&L for machine cut polished sadarahalli stone, uniform texture, in one piece in trade and risers, skiring of staircase inlcluding rounding the edge, cutting anti skid grooves 3 Nos in each trade, plastering/screed 15mm thick in CM 1:4 complete as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar incl removal of debries out side MD land.

M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and fair as in plinth protection incl joints filling complete all as specified.

S&F assembled ready to use stainless steel grade 304, kitchen plate rack inlcuding top/middle shelves of 1.0mm thick sheet, square hollow supports, including bottom hooks, spoon holes, front and back open, size 915x915mm including taking down old rack all as approved and specified.

M&L for PCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregates) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed platesback filling of pressed steel door frames all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheathed cable with multistandred copper conductor conforming to IS: 694:1990 (for Phase, Neutral and and Earth) in and including Non metalic PVC rigid condiut medium grade/ casing caping sutaible at site with ISI mark of appropriate size with all accessories laid in wall/ ceiling/floor etc, concealed with GI flush in box/terminal boxes of sutaible size, including front plate for mounting of modular switch/ socket and combined cover plate with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and flush in box and making good the distributed surfaces matching with existing complete all as specified and as directed for following- One light/ Bell/ fan point controlled by one switch

All as per Item No 88 above here in before but for Modular type Socket 6/10 Amp of two module in independent board, 230 volts complete all as specified and directed by Engr-In-Charge.

All as per Item No 88 above here in before but for Modular type Socket 6/10 Amp of two module on same board, 230 volts complete all as specified and directed by Engr-In-Charge.

All as per Item No 88 above here in before but for Modular type additional light / fan point on the same switch circuit mounted on same switch board controlled with separate switch, 230 volts complete all as specified and directed by Engr-In-Charge.

All as per Item no 88 above here in before but with 2.5 sqmm PVC insulated FRLSH unsheathed cable with GI Flush in box for modular switch/ socket 16 Amps of sutaible size as required with front plate for mounting of modular switch/ socket and combined cover plate of as required at site complete all as specified and as directed by Engr-in-Charge.

S&F for modular switch piano, flush type single pole, one way 16 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

S&F for Modular type Socket 6/16 Amp two way of 230 volts complete all as specified and directed by Engr-In-Charge.

S&F for modular switch piano, flush type single pole, one way 5/6 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

S&F for Modular type Socket 6/10 Amp of two way point complete all as specified and as deirected by engr in charge

S&F for Modular type fan regulator 1/2 module as reqd, 230 volts complete all as specified and directed by Engr-In-Charge.

S&F for Modular type bell push switch one way 6/10 Amps, 230 volts matching with existing complete all as specified and directed by Engr-In-Charge.

S&F Call bell AC, 230 Volts matching with existing sample complete all as specified and directed by Engr-In-Charge.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals.complete all as specified and as directed by Engr-In-Charge.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 10 Sqmm, 1100 volts grade (FRLS) and one run of 10 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through concealedin wall PVC conduit complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 10 Sqmm cable, one run of 10 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through concealedin wall PVC conduit complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

S & F in replacement VTPN DB - Dobule Door made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amp rated bus bar, 415 volt with PVC MCB blanking plate, stove enamelled for incorporated of MCBs, insulators and MCCB of capacity upto 125 Amps TP/FP etc, complete all as specified and as directed by engineer in charge

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 8 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed complete all as specified and as directed by Engr-In-Charge.

Supply and fixing MCCB FP 415 Volts 100 Amps, 16 KA complete all as specifed and directed by Engr-In-Charge. (Make- Indo Asian/ Havells/L&T)

Supply and fixing MCB SPN 40 Amps, 240 Volts complete all as specified and as directed by Engr-In-Charge.

Supply & fixing MCB SP 06-40 Amp, AC, 240 volts, complete all as specified and as directed by Engr-In-Charge.

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge.

Supply and fixing surface & wall mounted LED batten 2feet 10 W with luminious efficacy not less than 100 lumen/watt including flexible copper 2/3 core wire from tube light fitting to ceiling rose with mounting provisions and all accessories with color of light warm white/cool day light as reqd at site complete all as specified and directed by Engr-in-Charge.

S&F in replacement wall mounting fancy light fitting in plastic body with lamp holder B22 base and diffiuser sutaible for and including 9w LED Lamp of colour as decided with mounting provision complete all as secified as directed by Engr-in-Charge.

Taking down unserviceable ceiling fan, wall mounted fan, cabin fan, exhaust fans etc of any type and size from position, disconnecting electric supply, repair/replacement of unserviceable items, including cleaning oiling/greasing,tightening of nut bolt and refixing matching with existing. complete all as specified and directed by Engr-In-Charge.

Supply only following items to be fixed under item no 111 complete all as specified and directed by Engr-In-Charge. Ball/Roller bearing of size and shape matching with existing suitable for ceiling fans

Supply only following items to be fixed under item no 111 complete all as specified and directed by Engr-In-Charge. Ball/Roller bearing of size and shape matching with existing suitable for exhaust fans

Gun metal bush of size and shape matching with existing suitable for ceiling fans

Gun metal bush of size and shape matching with existing suitable for Exhaust fans

Motor stator for ceiling fans wounded with copper wire of size matching with existing with insulation with casing complete.

Motor stator for exhaust fans upto 250 mm sweep wounded with copper wire of size matching with existing with insulation and casing matching with existing complete.

Motor rotor prewired for ceiling fans of size and type matching with existing

Motor rotor prewired for Exhaust fans/wall mounted fans of size and type matching with existing

Fan blades for ceiling fan of any type and size matching with existing

Fan blade for exhaust fan metal body any type and size with mounting provisions matching with existing.

Plastic cup with screw for ceiling fans

Rubber bush with MS bolts, nuts & washers with 'U' clamps for ceiling fans complete all as specified and as directed.

S&F in replacement capacitor 2.5 Mfd suitable for ceiling / exhaust /wall mounting fans complete all as specified and as directed.

S&F in replacement down rod of 30/45 cm with nut, bolts and safety pin for ceiling fans complete all as specified and as directed.

M&L for Preparation of surface & painting the ceiling fans with blades complete after cleaning & applying one coat of stove enamelled white paint by spray painting, writing No complete all as specified & as directed by Engr -in-Charge.

M&L for Preparation of surface & painting the Exaust fans with blades complete after cleaning & applying one coat of stove enamelled white paint by spray painting, writing No complete all as specified & as directed by Engr -in-Charge.

Taking down, dismantling of geysers of any type/capacity from site for repair and Inspection, cleaning, descaling, brazing inner tank, internal wiring including replacement of unserviceable items as reqd, reassembling & reinstallation after necessary repair incuding testing after repair complete all as specified & directed. Note :(a) Replacement of major unserviceable items shall be measured & paid separately under respective item of work.. (b)Cost of replacement for minor items like washers, gaskets, nuts, bolts etc and items not mentioned below is deemed to be include in quoted rates.

Supply only following items to be fixed under item no 128 complete all as specified and directed by Engr-In-Charge. Inner tank for geyser of capacity 25 ltrs of shape matching with existing.

Siphon Assembly suitable for geyser of capacity 25 ltrs of shape matching with existing.

Heating element rated 1.5/2.0 KW with mounting provisions round/tikona as reqd of shape matching with existing

Thermostat with auto cutoff provision switch capillary/screw type, with range 0-80 deg celcius of shape and size matching with existing suitable for geyser of capacity 25/50 Ltrs.

Indicator lamp red and green with coloured diffuser for geysers matching with existing.

Safety valve/high pressure valve matching with existing for geysers

NRV for geysers matching with existing.

Base fixing cover matching with existing.

Cover outer for geyser of capacity 25/50 ltrs of shape and size matching with existing.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed by Engr-In-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm x 4 core including taking down unserviceable UG cable complete all as specified and directed by Engr-In-Charge.

Excavation in trenches in soft /loose soil not exceeding 1.5 M wide and not exceeding 1.5 M in depth for laying of UG cables etc and getting out complete all as specified and as directed by Engr-In-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in any type of soil complete all as specified and as directed by Engr-In-Charge.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point all as directed.

M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness complete all as specified and as directed by Engr-In-Charge.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and directed Complete all as specified and as directed by Engr - In - Charge.

Supply and laying 25 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge.

Supply and laying 20 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge.

S & F of float valves of size 20 mm and as reqired at site as complete brass fitting with rod and plastic ball Complete all as specified and as directed by Engr-in-in Charge.

S & F gun metal gate valve with inner wheel head, screwed both ends in iron pipe and fixed of Size 20 mm Complete all as specifed and as directed by Engr-In-Charge.