PROVN OF COVERED SHED WITH KOTA STONE FLOORING AND ALLIED WKS FOR ASSEMBLY OF ALL RKS AND FAMILIES AT BLDG NO M-14 OR 17 SARVA DHARMA STHAL, TECH SP REGT, SCHOOL OF ARTY AND PROVN OF COVERED SHED WITH KOTA STONE AND ALLIED WORKS FOR ASSEMBLY OF ALL R

Amount

Surface excavtion n exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for hard core of broken stone of gauge n.exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface etc complete all as specified and directed.

M&L for Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F colour coated Galvalume sheets of 0.50mm thick (total coated thickness) of approved profile and corrgated stifferers at pan centre, having high tensile (min. 550 MPs yield strength) CR steel base metal with hot dip alloy coating of AI-Zn-Si as per ASTM A 792 M- 02/AS 1397 ALU - ZINC ALLOY SHEETS (Alu - 55%, Zinc - 43.5%, Silicon - 1.5% having coating of 150 GSM & colour coating of Super Durable Polyster (SDP), having coating of 25 - 30 microns top coat & 7 - 8 Microns bottom coat and fixed to purlins with galvanised self driven self tapping screws 5.50 mm dia of required length all as per manufactures instruction etc complete all as specified and directed.

All as per item No 5 above but in ridges with plain sheet to suit profile of roofing.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40 mm graded aggregate) as in foundation, filling and mass concrete all as specified and directed.

M& L for machine cut kota stone slab flooring complete 20-25mm thick over and incl 20mm thick CM 1:6 screed bed, set and jointed with grey cement alurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints with maximum depression on face from straight edge held against the dressed surface n exc 40mm of random rubble walling, uncorsed or brought upto courses complete all as specified and directed.

M&L for brickwork with Fly Ash brick straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed.

M&L for brickwork with Fly Ash brick straight or curved on plan to any radius of half brick wall built in CM 1:4 etc complete all as specified and directed.

M&L RCC Nominal type B-1 1:2:4 (using 20mm graded stone aggregate) as in lintel & beams complete all as specified and directed.

M&L RCC Nominal type B-1 1:2:4 (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L RCC Nominal type B-1 1:2:4 (using 20mm graded stone aggregate) as in slab supported on walls, beams etc complete all as specified and directed. (Note for Item no. 15 to 17 :- Formwork and reinforcement shall be measured and paid separately)

Providing form of work to sides & soffits of floor or roof beam, lintels etc finished rough surfaces all as specified and directed.

Providing form of work to soffits of suspended slab such as roof slab & similar work n exc 200mm wide finished rough surfaces all as specified and directed.

Providing form of work to edges of concrete,flats, slabs such as roof slab & similar work n exc 200mm wide finished rough surfaces all as specified and directed.

Providing form of work to chajjas & similar items including edges finished rough surfaces all as specified and directed.

M&L for TMT Bars, Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips) complete.

All as per item No 22 above, but 6 to 8mm dia complete.

All as per item No 22 above, but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete.

M&L for moorun filling in floor or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering etc complete.

M & L for rendering 10mm thick in CM (1:6) on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

M & L for rendering 5mm thick ceiling plaster in CM (1:3) on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

M & L for rendering 15mm thick external plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

M&L coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), Matt finish, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 300x 200x 7 mm thick, joint free glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F 30 mm thick factory Made with particle board core solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S & F stainless steel butt hinges medium weight 100 mm size etc complete all as specified and directed.

S & F 150 mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S & F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe 410 -W (Gde- E- 250) quality-A complete.

M&L for Providing precast cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) louvres and jallies, 35mm thick (measured solid), including wire reinforced & all mouldings fixed to wall in CM 1:4 all as directed.

M&L rendering 10mm thick plaster in CM 1:4 on roof slab using water proofing compound @ 3% by weight of cement finshed even and smooth without using extra cement etc complete all as directed. Note : Water proofing compound will be measured and paid separately.

Supply only Integral water proofing compound .

M&L for preparation of surfaces and applying water proofing treatment are as under :- (i) Applying one coat of bituminous primer @ 0.25 Kg/Sqm. (ii) Laying torch applied APP polymer modified membrane 3mm thick with non-woven polyester mat as reinforcemrent weighing not less than 3.50 Kg/Sqm.

S&F for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls,floors etc complete all as specified and directed.

All as per item No 42 above but 20mm bore.

S&F 32mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 including all fittings laid in trenches all as directed.

S&F 20 mm bore gun metal valve with iron wheel head screwed both ends for iron pipe complete.

S & F 15mm bore bib taps, brass chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S & F 15mm bore pillar taps, fancy type brass chromium plated with capstan heads, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed.

S&F 15mm bore stop valves, fancy type brass chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and waste pipe all as specified and directed.

S&F vitreous china wash basin of size 550x400mm (flat back including brackets cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe , brass chromium plated waste fitting 32mm bore with long screwed shanks and fly nuts, flange end bedded in red lead and other end fixed etc complete all as specified and directed.

S & F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), etc complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F 20mm dia brass, chromium plated tubular towel rail, D type, 60cm long between flanges complete.

S& F PVC ( SWR ) floor trap plain with grating including jointing with solvent cement of 75 mm dia etc complete all as specified and directed.

S&F grating doom 100mm dia of PTMT(Minimum weight 25gms) etc complete all as specified and directed.

S & F vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F 110 mm bore dia PVC ( SWR grade ) pipes single socketed , in any length with rubber ring joints, fixed to walls etc complete all as specified and directed.

All as per item No 59 above but 75 mm bore.

S & F PVC ( SWR grade ) bends any radius 110 mm fixed etc complete all as specified and directed.

All as per item No 61 above but 75 mm bore.

PVC ( SWR grade) branch piece 110mm, double (double Y) equal or unequal fixed etc complete all as specified and directed.

All as per item No 63 above but 75 mm bore.

S&F PVC (SWR) vent cowl 110mm dia

M&L for 150mm reinforced concrete pipes, class NP2, laid and jointed complete with collars.

M&L for concrete bed to drain pipe in PCC 1:3:6, type C-2 including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes complete.

M&L for RCC, type B1 1:2:4 (using 20 mm graded stone aggregate) set in CM 1:4 as in manhole cover slabs, deck slabs and the like including necessary formwork required all as specified and directed.(NOTE:- Reinforcement shall be measured and paid repeated)

M&L for 75mm thick PCC 1:3:6, type C-2 using (40mm graded stone aggregate) as in plinth protection finished even & smooth without using extra cement and making 10mm wide joints at every 3m interval and at every corner, filled with hot mix of bitumen and sand (1:3) all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed.

Construction of septic tank for 25 users of PCC block masonry in CM(1:4), PCC footing,type C1 1:3:6 RCC precast type B1 1:2:4 cover slab & vent pipe complete all as shown in Drawing No : CEPZ/92/TD/17M

Construction of soakage wells for 25 users(type B) 2.00m dia x 1.5m effective depth, RCC footing type B1 1:2:4, broken stone filling pit, RCC precast cover slab type B1 brick masonary in CM( 1:4) using fly ash bricks & vent pipe complete all as shown in Drawing No : CEAA/TD/54

M & L for preparation of new plastered surfaces of walls and apply two coats of oil bound distemper over a coat of chalk whitening complete all specified and directed.

M & L for preparation of new plastered surfaces of walls and apply two coats of cement base paint over a coat of white wash complete all specified and directed.

M & L for preparation of new plastered surfaces of ceiling and apply three coats of white wash complete all specified and directed.

M & L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthethic enamel paint over a coat of red oxide primer all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

M&L for point wiring with stranded copper conductor cable PVC insulated unsheathed 1.5Sqmm FRLS cable in and incl in PVC consuit of suitable size with PVC boards of appropraite sizes and all requisite accessories such as PVC elbow, Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminal box for mounting swicthes, sockets, fan regulators etc with one single core sheathed cable continuous 1.5sqmm FRLS copper cable for earth wire complete all as specified and as directed for light point wiring controlling with one switch

S&F surface and wall mounted LED fitting with extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver 20WLED fitting Make-Havells Cat Part Num:-LHEWEBP7INIW020,Bajaj/Wipro/Philips.

Supply and fix ceiling rose of size 65X25 mm surface bakelite three terminals complete all as specified and as directed.

Supply and fix fan regulator 100 watts electronic type for ceiling fan of size 900mm to 1400mm sweep working on 230Volts AC supply with all necessary connections etc complete all as specified and as directed.

S&F sheet metal enclosure for SPN DBs, 8 ways double door, built-in bus bars complete suitable for 240volts, AC 50 Hz complete all as specified and as directed. Make-L&T(Cat No. DBSPN012DD)/legrand/Havells

S&F MCB SP 5 to 32 Amps, 240 volts complete all as specifiied and as directed

S&F MCB single ploe + neutral 240 Volts, 32-63 Amps 10KA capacity 'C' SERIES OF MAKE: LEGRAND, CAT NO-4086-17 To 20 or eqivalent in L&T, siemens/Hager

Supply, laying, joinitng and testing LT underground cable, heavy duty, 1100 volts XLPE insulated and sheathed, armoured with multi stranded aluminium conductor cable, laid in trences/ducts or fixed to poles/walls orlaid under roads/paths/drains/culverts duly encased in galvanised stel pipe of suitable sizes including cable fland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes. (a) 10 Sqmm 2 Core

M&L dry and, filling in trenches around under ground cable complete all as specified and direcetd.

M&L for providing of new Sub class 'B' bricks, old size, well burnt laid flat dry for protectin of under ground cablecomplete all as specified and directed.

S&F PVC casing/Capping of size 25/32 mm with all requisite acessories i.e. junction box, inner & outer corners, bend tees,collers, reducers etc complete all as specified.

S&F switch piano flush type 5Amp Single pole one way complet all as specified and direcetd.

S&F install new ceiling fan white colour 12mm sweep type with comlete accessories all as specified and directd by Engr-in-charge.

S&F install new Exhaust fan heavy duty, gray coour, 1400 RPM size 300mm metal body type with complete accessories all as specified and directed by Engr-in-charge.

Supply & fixing stainless steel kitchen plate rack of size 750mm X 900mm, 1mm thick sheet including plug & fixing screws complete all as specified and directed.

Note: Amount of sch of credit of NIL will be deducted from total amount of BOQ.

M/s Lakhanpal construction company

M/S Chandan Construction Company

M/s. JBSR ENTERPRISES.

J Sams Contructions

N.U. MIRZA

Vinod Enterprises

M/S SAMEER SUBHASH PATANI