Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC | ₹31.1 L Quoted ₹31.8 L | L1 | Accepted-AOC Bidder is L1 |
| 2 | L2₹37.5 L+₹5.7 L (18.0%)Rejected-AOC | ₹37.5 L+₹5.7 L (18.0%) | L2 | Rejected-AOC Bidder is L2 |
| 3 | L3₹43.4 L+₹11.6 L (36.3%)Rejected-AOC | ₹43.4 L+₹11.6 L (36.3%) | L3 | Rejected-AOC Bidder is L3 |
| Sl No | Description | Qty | Unit | R K ENTERPRISES L1 | AGGARWAL ENGINEERING CO L2 | LOVELY AIRCON SYSTEMS L3 |
|---|---|---|---|---|---|---|
| 1.00Material & Labour for carrying out the descaling of the shell & Tube condensers by isolation of each condenser by providing of dummy plate for inlet & oulet connection and separation of condenser from water circulation without disturbing the operation of the AC plant, carrying out the descaling by circulation of the diluted scale removing agent organic compound type chemical of RA III/ Chemtex Brand or other chemical as approved by AGE (I) SNS at the appropriate ratio depend upon the scale deposit inside copper tubes by forced circulation and opening the end covers manually brushing the copper tubes with nylon brushes of various size to remove complete scale, de-greasing with caustic soda soluation and flushing out with fresh water refixing all disconnected pipes lines, end covers with new rubber gasket and opening water line valves and checking of water leakage, apply grease to all MS Bolts & Nuts and put the condensers fo the following capacities in operational complete the following capacity all as directed by Eng-in-charge for the following:- | ||||||
| 1.01 | 30 TR Capacity installed at 223 ABOD. | 6 | Each Job | 4,500 ₹27,000 Lowest | 6,500 ₹39,000 | 8,000 ₹48,000 |
| 1.02 | 15 TR Capacity installed at 23 FAD. | 3 | Each Job | 3,500 ₹10,500 Lowest | 5,500 ₹16,500 | 6,000 ₹18,000 |
| 1.03 | 27 TR Capacity installed at 23 FAD Mag No 24 & Mag No 25. | 6 | Each Job | 4,500 ₹27,000 Lowest | 5,500 ₹33,000 | 8,000 ₹48,000 |
| 2.00 | M& L for servicing the Package Type A C Plants of capacity 11 TR at 23 FAD water cooled type complete including cleaning, greasing of blower motor etc of following Capacities by trained and qualified Mechanics of including leak test by nitrogen gas and charging the refrigerant as required at site & test run for 24 hrs to achieve satisfactory complete all as specified and directed :- | 6 | Each Job | 4,500 ₹27,000 Lowest | 6,000 ₹36,000 | 10,000 ₹60,000 |
| 2.01 | All as per item No 2 above but of capacity 11 TR at 23 FAD Air cooled type. | 2 | Each Job | 4,500 ₹9,000 Lowest | 6,000 ₹12,000 | 6,000 ₹12,000 |
| 2.02 | All as per item No 2 above but of capacity 22 TR at 23 FAD Air cooled type. | 4 | Each Job | 5,000 ₹20,000 Lowest | 7,500 ₹30,000 | 12,000 ₹48,000 |
| 3.00Material & Labour for carrying out the servicing of the Air Handling units of both inside & outside cooling coils by applying the non-acidic scale removing agent to the fins area of the cooling coil, copper tubes, remove the complete scale deposit across the coil, flushing through and complete blowing out the dirt, cleaning the fan impellers, filter section, fan section and complete cleaning of filters, tightening of all bolts & nuts, renew the rusted bolts & nuts checking the alignment of the drive set and testing & commissioning the Air Handling units of AC Plant complete the following capacity all as directed by Eng-in-charge for the following:- | ||||||
| 3.01 | 60/54 TR Capacity. | 2 | Each Job | 5,000 ₹10,000 Lowest | 6,000 ₹12,000 | 5,000 ₹10,000 Lowest |
| 3.02 | Upto 30 TR Capacity. | 10 | Each Job | 4,000 ₹40,000 | 5,000 ₹50,000 | 3,000 ₹30,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 Nov 2025, 6:10 pmClosed
CWE Jalandhar Cantt
HQ CWE Jalandhar Cantt PIN 144005
Repair Replacement Maintenance of Central type AC Plant Package type AC plant installation and connected works at Mil Stn Suranussi under AGE I Suranussi
2025_MES_724037_2
8325/45/E8
Open Tender
Electrical and Maintenance Works
Item Rate
273 days
HQ CWE Jalandhar Cantt
Class D Category c (i) for contractors enlisted with MES
9 documents required · 9 mandatory
₹500
Yes
AGE (I) Suranussi
₹90,000
Yes
3 Jan 2026
7 Nov 2025
28 Nov 2025
7 Nov 2025
19 Nov 2025
14 Nov 2025
Amount
Material & Labour for carrying out the descaling of the shell & Tube condensers by isolation of each condenser by providing of dummy plate for inlet & oulet connection and separation of condenser from water circulation without disturbing the operation of the AC plant, carrying out the descaling by circulation of the diluted scale removing agent organic compound type chemical of RA III/ Chemtex Brand or other chemical as approved by AGE (I) SNS at the appropriate ratio depend upon the scale deposit inside copper tubes by forced circulation and opening the end covers manually brushing the copper tubes with nylon brushes of various size to remove complete scale, de-greasing with caustic soda soluation and flushing out with fresh water refixing all disconnected pipes lines, end covers with new rubber gasket and opening water line valves and checking of water leakage, apply grease to all MS Bolts & Nuts and put the condensers fo the following capacities in operational complete the following capacity all as directed by Eng-in-charge for the following:-
30 TR Capacity installed at 223 ABOD.
15 TR Capacity installed at 23 FAD.
27 TR Capacity installed at 23 FAD Mag No 24 & Mag No 25.
M& L for servicing the Package Type A C Plants of capacity 11 TR at 23 FAD water cooled type complete including cleaning, greasing of blower motor etc of following Capacities by trained and qualified Mechanics of including leak test by nitrogen gas and charging the refrigerant as required at site & test run for 24 hrs to achieve satisfactory complete all as specified and directed :-
All as per item No 2 above but of capacity 11 TR at 23 FAD Air cooled type.
All as per item No 2 above but of capacity 22 TR at 23 FAD Air cooled type.
Material & Labour for carrying out the servicing of the Air Handling units of both inside & outside cooling coils by applying the non-acidic scale removing agent to the fins area of the cooling coil, copper tubes, remove the complete scale deposit across the coil, flushing through and complete blowing out the dirt, cleaning the fan impellers, filter section, fan section and complete cleaning of filters, tightening of all bolts & nuts, renew the rusted bolts & nuts checking the alignment of the drive set and testing & commissioning the Air Handling units of AC Plant complete the following capacity all as directed by Eng-in-charge for the following:-
60/54 TR Capacity.
Upto 30 TR Capacity.
M&L for Dismantling of exsting electrical connections & other spare parts, taking down all existing parts from cooling tower of the following capacity for S&F new cooling tower hub and fins complete including fixing all,testing and commissioning of various capacity of AC plants,complete all as directed by Eng-in-charge.
60/54 TR Capacity cooling tower hub and fins.
30 TR Capacity cooling tower hub and fins.
11 TR Capacity cooling tower hub and fins.
M&L for disconnecting electical/ mechanical connections and de-coupling Motor from pump/compressor, taking down the defective Induction Motor of any make / model shifted to work shop for dismantling motor , remove burnt out winding from stator and rewinding the stator with same gauge super enamelled copper conductor with necessary insulation materials , varnishing backing re-assembling motor including replacement of both end bearings complete after complete the job motor shifted to site and reinstalled at its original position including allignment with pump/compressor with electrical connections and testing for best performance complete all as directed of the following capacities :-
Motor upto 3 to 5 HP.
Motor 7.5 HP to 10 HP.
M&L for charging refrigerant R-22 gas including checking of leaks and testing & commissioning of the system complete all as directed. Make: Mafron / Freon
M&L for charging refrigerant HFC R-407 a gas including checking of leaks and testing & commissioning of the system complete all as directed. Make: Mafron / Freon
Supply and charge of compressor oil servo freeze in Package/ Central type AC plant of any capacity complete all as specified and directed. Make: Servo/ HP
Taking down unserviceable single phase preventer and S&F new single phase preventer, 230 V complete all as directed. Make: L & T /Siemen/GIc
Material & Labour for taking down the defective unserviceable solenoid valve coil and supply & fixing of new solenoid coil suitable to work in single phase, AC 220 V,50 Hz complete all as directed. Make: Sporiaon/Sanlan
Supply and fixing core filter for package type chiller unit of capacity up to 22 TR. Make: Voltas/ Blue Star
Material & Labour for taking down the defective/ unserviceable High Pressure cutout switch and supply & fixing of new high pressure cutout sensor/pressure transmitter capacity as per site reqmt including connecting up the Electrical & pressure line connections and setting the cutin & Cutout pressure limits and testing the cutout switch for AC plant compressor complete all as directed. Make:Indfoss/Danfoss/ Honeywell
Material & Labour for taking down the defective unserviceable oil Pressure cutout switch and supply & fixing of new oil pressure cut out switch/sensor capacity as per site reqmt including connecting up the Electrical & Pressure line connection and setting the cutin & cutout pressure limits and testing the cutout switch for AC plant Compressor complete all as directed. Make:Indfoss/Danfoss/ Honeywell
Material & Labour for replace electronic timer star-delta 3-60 Sec, 200-240/380-440v AC 50/60 Hz connecting the wiring & testing complete all as directed. Make: Siemens/ L& T /GE/Schneider.
Material & Labour for taking down the defective unserviceable power contactor & burned out copper wire, lugs, and S&F of new power contactor 3 pole, of 32 Amp screw terminal 15 KW/400V 20 Hp /480V 24 v 50/60 Hz including the copper wire & copper lugs and testing complete all as directed. Make: Siemens/ L& T /GE/Schneider.
S&F MPD Power supplier of capacity 5-30 Amps auxilary supply,15 V,AC 230V,50Hz,AC supply as fixed in repairs complete all as directed.
Taking down old unserviceable 100 mm dia CI butterfly valve and S&F 100 mm dia CI butterfly valve,PN 1.0,pneumatic double acting actuator with both sides flanges and gaskets complete all as specified and directed.
Taking down old unserviceable 50/80 mm dia CI butterfly valve and S&F 80 mm dia CI butterfly valve,PN 1.0,pneumatic double acting actuator with both sides flanges and gaskets complete all as specified and directed.
Painting air conditioning plant complete of a capacity 20 to 60 TR chiller water type including preparation of surface by cleaning /rubbing /scrapping as required and painting with two coats of synthetic enamel paint of existing color using spray gun and marking SM MES No etc as directed on the following parts/ equipments:- Compressor and compressor motor -3 Set. Condenser /chiller pump /hot water pump -06 Nos. LT panel complete -01 No. Hot water generator -01 No. Cooling tower complete -01 No. CT fan motor -01 No. Blower fan motor -02 Nos. All water /gas pipe line -01 No.
Material and labour repair to internal wiring / burnt out wiring of LT panel and supply and rewiring with suitable size single core PVC insulated, unsheathed multi stranded 1100 volts grade copper conductor cable of required sizes from bus bar to outgoing feeders/ starters properly lugged at end terminals , cleaning of panel board , tightening of all connections removing old burnt lugs and including replacement of Voltmeter digital type 0-500 V, Ampmeter 0-500 Amp and indicator lamp complete all as directed.
Supply and fixing in replacement shut off valve brass body of suitable size upto 20 mm as per site requirement complete all as specified and directed. Make: BAP/KIM
S & F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm dia
Supply and fix in replacement, filter for Central type AC plant of capacity up to 30 TR. Make: Voltas or equivalent.
Supply and fix in replacement, of Relative Humidity sensor complete all as specified and directed.
Supply and fix in replacement, of Temperature Gauge (Digital Type) as specified and directed.
Supply and fix in replacement, V Belt B-80 to 88 type complete all as specified & directed by Engineer-in-charge.
Supply and fix in replacement,V Belt B-72, B-75 type complete all as specified & directed by Engineer-in-charge.
Supply and fix in replacement, V Belt A-40 to 63 type complete all as specified & directed by Engineer-in-charge.
Supply and fix in replacement, V Belt A-20 to 30type complete all as specified & directed by Engineer-in-charge.
M&L for replacement of micro filter of size 60x60x15cm (20 micron per filter).
M&L for replacement of micro Hepa filter of size 60x60x30cm (5 micron per filter).
Supply and fixing shaft bearing as per existing of blower of AHU.
Supply and fixing 3 pole connactor MNX 18 type Coil, 18 Amp, 240V,50/60 Hz complete. Make : Minilec/ L&T/ Schneider/Havells
Material & Labour for Taking down the damage blower fan and supply & fixing new as per existing size and make including necessary fixing arrangement.
Supply & fix in repair power contactor AC3 25 Amp, 3 pole coil ML 1.5 240V AC 50Hz complete all as specified & directed.Make : Minilec/ L&T/ Schneider
Supply & Fixing Thermal over load relay for MN2 20-33A up to 500v 50/60 Hz Make : L&T/ Schneider/Havells
Supply and fixing Add on block MNX-A1 up to 415 Volt complete all specified and directed Make:L&T/ Schneider/Havells
M & L for replace copper tube by suitable soldering material 1/8,7/8 & 5/8 as per existing size complete all as specified and directed by Engr-in-Charge.
Supply & Fixing MCCB 3 pole, 100 Amps, 415 Volt.with breaking capacity 16 KA with phase extender/spreder and borrier/seperator.
Supply and fixing MCCB 4 pole, 125 Amps, 415 Volt. with breaking capacity 16 KA with phase extender/spreder and borrier/seperator.
Supply and fixing MCCB 4 Pole 250 Amps, 415 V, Adjustable type thermal & fixed magnetc, with breaking capacity 36 KA with phase extender/spreader barrier/ Separator
Supply and fixing MCB TPN , 40 to 100 Amps 415V 10KA 'C' curve, in existing panel of AC Plant.
Supply and fixing MCB TP , 25 to 63 Amps, 415 volt 10KA 'C' curve in existing panel of AC Plant.
Supply and fix in replacement, MCB SPN 20/25/32 A 240V, 10KA 'C' curve complete all as specified and directed.
Supply and fix in replacement, MCB SP 6-32 Amp 240V, 10KA 'C' curve complete all as specified and directed.
Material and labour for repair of leak test at AC Plant (package/central) with nitrogen gas pressure and charging the refrigerant as required at site & test run for 24 hrs to achieve satisfactory results complete all as specified and directed by Engr-in-Charge. Note : (i) Required refrigerant and copper tube shall be measured and paid separately under respective items. (ii) The rate quoted include the cost of nitrogen gas
M&L for replacement of safety electronic buzzer for hot water generator panel capacity upto 50 KW complete all as specified and directed.
Material & Labour for taking down the defective/ unserviceable relay for hot water panel and S&F new relay CMRON LY2N/LY4N 3 amp to 10 Amp as per site reqmt for hot water controller panel complete specified and directed.
Material & Labour for taking down the defective/ unserviceable digital step controller and S&F new master digital step controller for hot water controller panel complete specified and directed.
Supply and fixing digital type Ammeter 4"x4" size 0-200 Amp with suitable CTs of. Make: L&T/AE/HPL
Supply and fixing digital type Voltmeter 4"x4" size 0-500 Volts with suitable CTs of Make: L&T/AE/HPL
Supply and fix in replacement, Gun-metal, globe or gate valves of 20mm with iron wheelhead, screwed both ends for ironpipe and fixed complete with fixing all as specified & directed.
Supply and fix in replacement, Gun-metal, globe or gate valves of 25mm with iron wheelhead, screwedboth ends complete with fixing all as specified & directed.
Supply and fix in replacement, in repair, gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe, including provn of one union complete all as specified of size 65 mm bore pipe complete all as specified & directed.
Supply & Fixing in repair PTMT Ball valve with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe 15 mm dia. complete with fixing all as specified and as directed.
Supply & Fixing in repair PTMT Ball valve with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe 20mm dia. complete with fixing all as specified and as directed.
Supply and fix in replacement, 32/40 mm dia Balancing valves made of Cast iron/Gun metal of PN 16 Rating as per engineering standards handle type and specifications.(For Hot water system), complete all as specified and directed.
Supply and fix in replacement, 50 mm dia Balancing valves made of Gun metal of PN 16 Rating as per engineering standards handle type and specifications.(For Hot water system), complete all as specified and directed.
M &L for replacement of chiller sensor for 30 TR water cooled type compressor complete all as specifed and directed by Engr-in-Charge.
M &L for replacement of by pass switch for 15/30 TR water cooled type compressor complete all as specifed and directed by Engr-in-Charge.
M& L for dismantling/opening existing 11 ton capacity compressor with replacement of screw type company made new one sealed compressor of package type air conditioner capacity 11TR, with complete all fixing arrangement like suitable size of copper pipe and control valve complete all as specified and directed including old unsv compressor deposit in MES yard complete all as specified and directed. Note :- After fixing of new compressor testing will be done its own arrangement test run for 24 hrs to achieve satisfactory results complete all as specified and directed.
M& L for dismantling/opening existing 5.5 ton capacity compressor with replacement of screw type company made new one sealed compressor of package type air conditioner capacity 5.5 TR, with complete all fixing arrangement like suitable size of copper pipe and control valve complete all as specified and directed including old unsv compressor deposit in MES yard complete all as specified and directed. Note :- After fixing of new compressor testing will be done its own arrangement test run for 24 hrs to achieve satisfactory results complete all as specified and directed.
M&L of PLC/control card for hot water generating panel of any capacity / make including checking the all components, replacing damaged minor components with new ones, making the PCB fully functional till Hot water system testing Engineer-in-Charge satisfaction complete all as specified and directed.
Supply and fixing of New PCB(PLC) alongwith all accessories as per existing model / sample suitable for chilling unit of pakage type AC unit any capacity 11/22 TR fixed on existing system by any fixing method and making electrical connection including taking down of existing unsv PCB complete and produce test certificate all as specified and directed by Engineer-in-Charge.
M & L for rewinding of electric motor of capacity 1/1.6/2 HP incl dismatling, carrying to workshop and transporting back and testing thereafter up to the satisfaction of Engr in charge.
Repair to small damage/leckage cooling tower FRD type upto 60 TR with suitable material/chemical complete all as specified and directed.
M& L for complete servicing of water cooling tower any make any size up to 60 TR by used suitable materials/pressure pump to remove sludge & extra material complete all as specified and directed by Engineer-in-charge
Supply & fixing ball bearing SKF 6308 or equivalent complete all as specified and directed.
Repair to HOT water generator system electric panel complete capacity upto 50 KW including replacement of minor part like copper wire, lugs, ON/OFF switch & rellay complete all as specified and directed. make Repaid cool
S&F of heating elements of capacity 2/3 KW for water heater as per site requirement complete all as specified and directed.
M&L for Repair to condenser/chiller coils of package type AC plant complete in all respects of upto 11/22 TR AC plant
S&F of 25 mm 'med grade ' GI pipe with all fitting and fixed complete to walls and ceilings or laid in floors suitable for plant up to outside the plant room incl making good to disturbed surfaces of wall complete all as specified and directed.
M & L for servicing of air filter assembly of package type AC plant with descaling solution to remove deposited scale/dust including cleaning of tubes with wire brush to the entire satisfaction of Engineer-in-charge complete all as specified and directed.
Repairing of electronic expansion valve upto 30 TR for any gas system.Make:Indfoss/Danfoss/ Sporlain
M& L for replacement of shaft seal of 30 TR compressor including dismantling/opening motor coupling and re-fixing complete all as specified and directed.
Repair to condenser/chiller unit of central type AC plant Make-Accel /Voltas by dismating carefully for replacement of worn out part from unit and transporting to workshop, opening up for carrying out the necessary repair/replacement incl proper clean of condenser coil and re-assembling condenser unit transporting back to site,refixing and testing for proper functioning complete all as specified and directed. Note :- Rates quoted against this item shall include the cost of fixing all type of spares, fixing, minor parts such as bolts, nuts, washers, gasket set, seal etc and also supplying after ensuring entire system leak proof complete all as specified and directed.
Attending daily basis general complaints of the non functioning AC plant complaints due to the minor defect like electric suppy/pump & moter/ cooling/ blower/ AHU/ switch/leckage of water rectified by deploying sufficient labour (Skilled and helpers) for repair to minor repair of any description such as at any location complete all as specified. NOTE:- (i) Rates quoted by the contractor shall be deemed included the cost of necessary items like Nut & Bolt, cable lugs, PVC wire, Gland & required T&P. ( ii) Complaint shall be notified to contractor on telephone, therefore it is mandatory for the contractor to mention his ‘Mobile Number’ to be provided to Engr-in-Charge . (iii) Complaint shall be notified to contractor at any time between 0600 hrs to 2000 hrs and the same shall be immediately attended and defects rectified within six hrs from notification of complaint to the contractor. (iv) Confirmation of attendance & rectification of complaint shall be given by the contractor. (v) In case the contractor fails to attend complaints within stipulated time (i.e. 6 hrs), a penalty shall be imposed @ Rs 300/- per complaint. (vii) Major parts and cost of repair to AC plant shall be measured and paid separately under respective items.
M&L for detecting leakage of chilled water pipes of size 50/65 mm dia bore including replacement of MS flanges, gaskets, bolts, nuts etc complete to make the lines water tight as directed by Engr-in-charge
M&L for disconnecting, opening, for overhauling the water cooled type compressor unit complete with condenser capacity 30 TR AC Plant Make ACCEL/Voltas dismantling carefully for replacement of worn out part from unit and transporting to workshop, opening up for carrying out the necessary repair/replacement of worn out parts including lath/machinery work, re-assembling compressor transporting back to site,refixing with electric motor and testing for proper functioning complete all as specified and directed and repair/ replacment of the following components/worn out parts all as specified and directed by Engr-in -charge.
(i) All repair work will be done by authorised/ trained and qualified Mechanics
(ii) Testing of complete compressor unit after re-assembly the unserviceable Spare parts ,leak test by nitrogen gas and charging the refrigerant & oil as required at site & test run for 24 hrs to achieve satisfactory complete all as specified and directed
(iii) Required all other minor parts like nut, bolt, grease, seal etc included in coated rate.
(iv) Required other spare parts, referigent & oil shall be measured and paid separately under respective items.
M&L for disconnecting, opening, for overhauling the water cooled type compressor unit complete with condeneser capacity 15 TR AC Plant co Make ACCEL dismating carefully for replacement of worn out part from unit and transporting to workshop, opening up for carrying out the necessary repair/replacement of worn out parts including lath/machinery work, re-assembling compressor transporting back to site,refixing with electric motor and testing for proper functioning complete all as specified and directed at 23 FAD and and repair/ replacment of the following components/worn out parts all as specified and directed by Engr-in -charge.
Note : - (i) All repair work will be done by authorised/ trained and qualified Mechanics
(ii) Testing of complete compressor unit after re-assembly the unserviceable Spare parts ,leak test by nitrogen gas and charging the refrigerant & oil as required at site & test run for 24 hrs to achieve satisfactory results complete all as specified and directed
(iii) Required all other minor parts like nut, bolt, grease, gasket etc included in coated rate.
(iv) Required other spare parts, referigent & oil shall be measured and paid separately under respective items.
Supply and fixing MCCB 4 Pole 400 Amps, 415 V, Adjustable type thermal magnetc release, of breaking capacity 36 KA with phase extender/spreader terminals with phase separate.
Supply& Fixing of start/stop push button with Led indicator red/ green type -240 Volt Ac as per exiting sample/ size complete all as specified and directed. Make:ESBEE/Havells/Schneider
Supply, & fixing of Pressure gauge 4"dial 0-21 kgs rating complete all as specified and directed
Supply, & fixing in replace thremal over load relay 9-15 Amp OFF-RESET version complete all as specified and directed.
Supply, & fixing suction gauge 0 to 300mm complete all as specified and directed
M&L for repair of PLC control panel complete of 30 TR capacity / make voltas including repair of PCB checking the all components, replacing demaged minor components with new ones, making the PLC fully functional complete all as specified and directed.
Supply& Fixing of moter ON/trip indicator light Green/yellow 240 Volt Ac as per exiting sample/ size complete all as specified and directed.Make:ESBEE/Havells/Schneider
S & F `Y' Stainer 100/80mm dia with filter complete all as specified and directed.
S&F of heating strip of capacity 2/3 KW for hot water system as per site requirement complete all as specified and directed.
M &L for replacement of cooling tower honey fins including dismantling of existing cooling tower motor and GI/PVC pipe from various capacity of cooling tower thereafter re-fixing all compenents ,complete all as specified and directed by Engr-in-charge.
M &L for replacement of cooling tower rotary type base PVC 40mm size one nos and 04 Nos PVC pipe including dismantling of existing spare parts from various capacity of cooling tower ,complete all as specified and directed by Engr-in-charge.
M& L for Shaft Polishing capacity 15/30 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Piston Ring set of capacity 30 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Piston Ring set of capcity 15 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for AHU solonoid valve of capcity 15/30 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Oil pump assembly of capcity 30 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Oil pump assembly of capcity 15 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Rocker Arm of capcity 30 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Rocker Arm of capcity 15 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Piston Assembly of capcity 30 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Piston Assembly of capcity 15 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Gasket set complete of capcity 30 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Gasket set complete of capcity 15 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Suction and discharge rod of capcity 30 TR for compressor complete all as specified and directed by Engr-in-charge.
M& L for Suction and discharge rod of capcity 15 TR for compressor complete all as specified and directed by Engr-in-charge.
Supply and fixing in replace adaptor kit for MN2 & ML 0-1.5 contactor complete all specified and directed
Material & Labour for taking down the defective unserviceable air break power contactor & burned out copper wire, lugs, and S&F of new air break (power) contactor AC3 of 32 Amp 415 V coil 230V 50 Hz 276V 60 Hz (order No 3TF34 00-0AP0) including the copper wire & copper lugs and testing complete all as directed. Make: Siemens/ L& T/Schneider
Supply & Fixing Thermal over load relay for ML 2 13-21A up to 500v 50/60 Hz complete all as directed. Make: Siemens /L&T/ Schneider
AGGARWAL ENGINEERING CO (BID ID -3477011)
LOVELY AIRCON SYSTEMS (BID ID -3476648)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
Tenderdocus.pdf
Tender Documents • 1.18 MB
BOQ_827299.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .