Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹67.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹71.8 L+₹80,720 (1.14%)Rejected-Finance 1 206 SHOP NO 71 MANDIR MARKET SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹74.2 L+₹3.2 L (4.49%)Rejected-Finance N A | NEW DELHI | DELHI | 110001 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹74.7 L+₹3.7 L (5.16%)Rejected-Finance D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹74.7 L+₹3.7 L (5.25%)Rejected-Finance FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110 075 | NEW DELHI | NEW DELHI | DELHI | 110075 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹77 L
EMD Value
₹1.4 L
Closing Date
29 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NO 2 DELHI CANTT-10
HQ CWE NO 2 DELHI CANTT-10
SPL REPAIR TO BLDG NO T-72, 262 TRANSIT CAMP UNDER AGE B/R-III OF GE (WEST), DELHI CANTT-10
2022_MES_552620_1
CWE/WEST-29/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE WEST DELHI CANTT
As per Tender Documents
8 documents required · 8 mandatory
₹1,000
GE WEST DELHI CANTT-10
₹1.4 L
Yes
11 Jan 2023
17 Sept 2022
31 Oct 2022
17 Sept 2022
29 Oct 2022
16 Oct 2022
Amount
Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge,roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F galvanised steel sheet eaves gutters having total girth 600 mm & strength 340 Mpa including fixing bracket/clamp/fixing arragements complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as sfd and directed.
M&L for Gl frame work for 6 mm thickseamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre 6 mm thick for fixing in 600 mm x 600mm grid.
Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed work, complete all as specified and directed.
S&F Mild steel screw bolts shank dai 12 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.
Blank
S&F mild steel rolled work as in roof trusses, (framed),trussed,purlin rafter ,crane gantries,rails and heavy bracket framing (Beam,angle,channel or flat section) including distance pieces,cleats etc,confirming to grade Fe-410 Grade E-250 quality B, complete all as specified and directed.
Blank
M&L for two coat of synthetic enamel painting on new steel surfaces over 10cms width or girth over a coat of red oxide primer etc all as specified and directed.
M&L for preparation of old steel surafces and applying one coat of synthetic enamel painting on over 10cms width or girth etc all as specified and directed.
Taking down Chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames). complete all as specified and directed.
Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames). complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe-410 Grade E-250 quality A complete all as specified and directed.
M&L for 2nd class hard wood factory made 35mm thick glazed /gauzed and skelton shutters, open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters specified in SSR Part I, Section 8 , Clause 8.24(a). complete all as specified and directed.
M&L for 35 mm thick 2nd class hard wood factory made plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10 cm in width or girth including preparation of new or previously untreated surfaces of wood complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed
M&L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring hold fast, bed plate etc all as specified and directed.
S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.
S&F SS Butt hinges 100 mm long for PVC doors. complete all as specified and directed.
S&F aluminium anodized extruded bow handle fabricated type 125mm long. complete all as specified and directed.
S&F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed. complete all as specified and directed.
150 mm long aluminium handles, cast type, anodised and fixed. complete all as specified and directed.
S&F curtain rail (drapery rod ) 20 to 25 mm dia coloured with pair of suitable brackets,finnels and also making good the wall surface to match the existing surfaces complete all as specified and directed.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
S&F mild steel 300 mm ordinary rat tail rod pattern spring including roller plate, complete all as specified and directed.
S&F floor door stopper 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor. complete all as specified and directed.
M&L for Forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing in CM 1:4 to match existing work, complete all as specified and directed.
S&F Fibre glass reinforced plastic (FRP) door frames of cross section 90mmX45mm having single rebate of 32X15 mm to recieve shutter of 30 mm thick. The laminate shall be moulded with fibre resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all 3 legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame complete all as specified.
S&F 30 mm thick Fibre glass reinforced Plastic (FRP flush door shutter in different plain and wood finish made with fire retardent grade unsaturated polysterresin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyutheren foam (puF). Polystrene foam to be used as per filler material throughout the hollow panel, costed monolithically with testing parameters of FRP laminate confirming to table 3 of IS:14856 complete all as specified and as directed.
Taking down cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed.
M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on external walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed.
M&L for 10mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on internal walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint over a coat of alkali resistant primer including 1 to 2 mm thick exterior wall care putty complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls applying birla white putty 2mm on wall even and smooth surface and applying two coat of oil bound distemper over a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F 3mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqn in each pane complete all as specified and directed.
S&F powder coated Anodised aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F powder coated Anodised aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including provision of louvers and space for exhaust fans all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as sfd and directed.
M&L for Brick work with Sub class 'B' bricks having compressive strength not less than 100kg/sqcm straight or curved on plan to any radious in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M&L for Brick work with Sub class 'B' bricks straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed.
S&F in repair vitretious china wash down water closet pan (padestal pattern (excluding flushing cistern but including flush pipe and pvc sheet cover white).
S&F in repair Vitreous china squatting pan of orissa patern size (580 x 440mm) white with integral foot rest (excluding flushing cistern and flush pipe)
S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified & directed.
S&F urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed.
S&F Toilet paper holder of chromium plated brass fixed to walls with chromium plated (CP) brass screws
S&F Tubular towel rail 20mm dia brass chromium plataed all as specified.
S&F CP Soap dish , fixed to wall with chromium plated brass screws complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white flat back, size 580 x 450mm excluding taps, waste pipe chain and plug and porcelain but including brackets, waste coupling complete all as specified and directed.
S&F in repair flushing cistern 10ltr capacity syphonic action type low clevel with inlet ball valve ,float valve and handle including bracket,flushing pipe etc. complete all as directed.
S&F pvc connetion of size 15x450mm with PTMT nuts.
S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls complete all as specified and directed.
M&L for PVC (SWR) floor trap of 100mm dia,plain with grating including jointing with solvent cement.
S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement.
S&F PVC (SWR) vent cowl of 75mm dia.
S&F grating doom 125mm dia of CP with or with out hole (minimum weight 25gms).
S&F 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified and directed.
S&F 15mm dia stop valve, cast copper alloy chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions all as specified.
Supply only pillar taps fancy type 15 mm, CP/brass with capstan heads, screwed down high pressure, screwed for iron pipe and fixed all as specified and directed.
S&F in repairs 15 mm bore angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specified and directed.
S&F in repair chromium plated brass overhead shower rose 125mm dia, with revolving joint fixed to 15mm pipe, complete all as specified and directed.
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed.
Supplying and laying of CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including dismantling old GI pipes complete all as specified and directed.
Blank
Supplying and laying of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including dismantling old GI pipes complete all as specified and directed.
S&F of 2000 ltr capacity rotational moulded polythene water tank hoisted & fixed in position incl pvc float valve 20mm dia including dismantling old PVC water tank complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in CM 1:4 dismantling of existing surface . complete all as directed.
M&L for glazed ceramic coloured tiles (350x250x7mm/450x350x7mm ) 7hick on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:4 rough to receive tiles.
Demolition of cement concrete in ground floor and paving n.exc 15CM thickness (below or above ground level) complete all as specified & directed.
M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-1(using 20 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site.
S&F 75mm dia cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with lead joints, fixed to walls including all fittings including dismantling old CI pipes, complete all as specified and directed.
M & L for 100mm nominal size double wall corrugated HDPE pipes stiffnesss class SN 8 high density, polyethelene pipe resistent to chemicls, easy and light weighted, long living, low friction, flexible, sun resistant pipe and laid in trenches including demolition of old CI pipes complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd & directed.
kota stone grinding and polishing with bees wax making glazed finish jointed with grey cement slurry complete all as specified and directed.
S&F Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified.
S&F Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified.
S&F Bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified.
Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed.
Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in box of 1.6 mm thick including one coat of synthetic enmelled black paint and providing with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-
(a) One light/fan/bell point controlled by one way switch 5 amps.
(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.
(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.
Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board
S&F of switch pian type 5 amps single pole one way complete all as specified and directed.
S&F of switch piano type 15 amps single pole one way complete all as specified and directed.
S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed.
S&F of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.
S&F of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed.
S & F of Lamp holder,PVC /Polycarbonete type with back plate suitable for batten fittings with connections complete all as specified and directed
S&F of LED bulb of 9 watt complete all as specified and directed. Make: Havells
Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.
Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and depositto MES store to store complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods,remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.
S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.
S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.
Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.
S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.
S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.
M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
Supply and fix electricwater heater storage type steel body with copper inner tank and heating element upto 50 litre Horizontal type BEE 5 star rated complete with all accessories such as safety valve ,thermostate,NRV,etc
Supply and fix exhaust fan 300 mm sweep with blade and frame and louvers complete all as specified and directed
A R construction
M/S Rohit Enterprises
SHIVA ENTERPRISES
The new hut furnitures
YP INFRA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .