GE (N) P/TOKEN- 61 OF 2020-2021 REPAIR TO CHAJJAS, PLASTER, FLOORING, ROOF, PLUMBING, JOINERY AND MISC B/R WORKS TO CERTAIN BLDGS UNDER AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as directed.

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

All as per serial item No.2. here-in-before but except sheeting.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) including cleaning for refixing complete all as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) including cleaning for refixing complete all as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Material and labour for PP-R gate valves (brass insert) of 20mm bore complete including taking down old unserviceable valve all as specified and as directed.

Material and labour for PP-R gate valves (brass insert) of 25mm bore including taking down old unserviceable valve complete all as specified and as directed.

Material and labour for cutting chases in brick wall, not exc. 10cm girth, pinning in for concealed water tubing and making good to facings where required and pointing to cenment mortar (1:3) complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as bed blocks/ bed plates including necessary form work including demolition of existing concrete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down shutters of any description, area not exc.1 sqm each complete all as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.

Supply and fix for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete all as specified and as directed

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.

Supply and fix for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

Supply and fix for 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix for 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix for butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.

Supply and fix for 75mm size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.

Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.

Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix for brass locks, cupboard, grade 1, 75mm size, 6 levers with duplicate keys with brass key hole complete all as specified and as directed. Make: Godrej

S & F brass cup board lock 75mm size 4 lever with duplicate keys. Make: Godrej

S & F brass cylindrical lock vertical type with duplicate keys. Make: Godrej

Supply and fix for brass mortice lock, vertical type, size 100mm grade-1 of 4 levers with duplicate key complete all as specified and as directed.

S&F in repairs main door (knob on inside- regular key) Catalogue No Q-204-AB of make Quba with duplicate keys complete all as specified and as directed.

Supply and fix in repairs for 300mm, mild steel, ordinary rat tail rod pattern spring (helical spring) including roller and roller plate complete all as specified and as directed.

Supply and fix in repairs for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

Supply and fix in repair for brackets for drapery/ curtain rod, decorative type, stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix in repairs for drapery/ curtain rod of 25mm dia, decorative type, stainless steel complete all as specified and as directed.

Supply and fix in repairs for 25mm bore brass rod as in curtain rod decorative type section as per sample kept in GE (N) Pune office complete all as specified and as directed. Note: Weight not less than 500gm Per metre

Supply and fix in repairs for brass decorative caps of curtain rod of 25mm bore complete all as specified and as directed. Note: The weight of caps should not be less than 250gm per pair

Supply and fix in repairs brass brackets decorative for curtain rod of 25mm bore complete all as specified and as directed. Note: The weight of brackets should not be less than 180gm per pair

Supply and fix in repairs for floor door stopper of brass body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed.

Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix in repairs for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix in repairs for 10mm thick corner glass of size 250mm x 300mm with stainless steel decorative type railing on front face and fixed with 3 Nos 'D' type stainless steel brackets complete all as specified and as directed.

Supply and fix in repairs for Garware Sun Control polyster film, 50 micron, reflective type fixed on existing glass panels complete all as specified and as directed.

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets/galvalumesheet/fibre sheet in roof coverings complete all as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for fibre glass reinforced translucent corrugated sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Material and labour for french polishing on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed.

Material and labour for old treated wooden wall panelling surface and applying one or two or more coats of melamine polish with spray guns, compressor etc complete till fine glossy surface is obtained complete all as specified and as directed.

All as per serial item No. 58 here-in-before but on wooden door, window surfaces.

Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces by brooming down with steel brush over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated platstered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old treated plastered or unplastered surfaces of wall by removing all loose paints etc removing nails ,applying birla putty whereever required, smoothenthe sface with sand paper and finally applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour for preparation of old treated plastered or unplastered surfaces of ceiling by removing all loose paints etc removing nails ,applying birla putty whereever required, smoothenthe sface with sand paper and finally applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted wooden/asbestos surface on ceiling and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old treated wooden surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls using steel wire brush , sanding machine, rubbing ivory papers etc and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for complete removal of existing treatment on ceiling using steel wire brush , sanding machine, rubbing ivory papers etc and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for applying one coat of alkali resistant priming paint on walls complete all as specified and as directed.

Material and labour for appyling one coat of alkali resistant priming paint on ceiling complete all as specified and as directed.

Material and labour for appying two coats of acrylic distemper of approved tint on wall surfaces complete all as specifie and as directed.

Material and labour for appyling two coats of acrylic distemper of approved tint on ceiling surfaces complete all as specifie and as directed.

Material and labour for old plastered/ treated surfaces and applying POP (Plaster of Paris) punning 8 to 10mm thick to make the surface to uniform in true line and plumb, the surface shall be finished smooth to ensure no undulations or loose particles appears on the face and ready to receive finish complete all as specified and as directed.

Material and labour for applying one coat of white cementitious putty on wall and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed.

Material and labour for applying one coat of white cementitious putty on ceiling and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of lustre paint (water based) complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of lustre paint (water based) complete all as specified and as directed.

Material and labour for preparation of old treated plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed .

Material and labour for preparation of old decorated surfaces and applying one coat of weather proof coat paint to mangalore tiles roof/ wall etc. complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for coloured vitrified tiles 10mm thick (square/rectangular) polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for light shade coloured vitrified ceramic tiles of size 600mm x 100mm x 10 mm thick as in vertical surface, pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:4) as in floors complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 400mm x 400mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:4) as in floors complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 200mm x 7mm thick of colour as in dado/ skirting and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Demolition of stone/ block/ brick masonry, built in cement mortar including all quoins, pillars etc. complete all as directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L Brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of concrete roof surfaces, mixed with integral water proofing compound @ 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/ 20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repairs for PVC cabinet with looking mirror, single shutter of size 600mm X 450mm X 100mm complete all as specified and as directed. Make: Prayag/ Commander as approved

Material and labour in repair for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.

Dismantling battens for tiles, shingles etc. of any size including tiling fillets spaced exceeding 15cm complete all as directed.

Dismantling timber scantlings, unframed work, 40 sq. cm and over in section, in any position complete all as directed.

Supply and fix for mild steel work in tubular trusses, main columns, posts, for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding, 10 litres capacity PVC low level flushing cistern, all internal fittings, inlet, outlet pipe connections etc complete all as specified and as directed.

Supply and fix in repairs for 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracket complete all as specified and as directed.

Supply and fix in repairs for 5mm thick float glass looking mirror with 6mm thick ply wood back and aluminium powder coated frame complete all as specified and as directed.

Supply and fix in repairs for 15mm dia bib cock standard (old handle) without flange of PTMT any colour high pressure screwed for iron pipe all as per Cat No.121-0 (Standard Series) of make Prayag or of equivalent make as per Appx 'A' complete all as specified and as directed.

Supply and fix for 15mm dia PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed

Supply and fix in repair for 15 mm bore bib taps chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as per Cat No.PIS-06 (Neptune Series) of make Prayag or of equivalent make as per Appx 'A' complete all as specified and as directed.

Supply and fix in reapir pillars tap for 15mm bore pipe, cast copper alloy, with capstan heads, chromium plated, cast copper alloy, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair for 15 mm bore brass chromium plated, mixer for mixing hot and cold water screwed down for iron pipe including wall flanges complete all as specified and as directed.

Supply and fix in repairs stop valves for 15mm bore pipe, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs for 15mm dia cast copper alloy CP angle cock screwed down for iron pipe complete all as specified and as directed.

Supply and fix in repairs for 15mm dia cast copper alloy CP bib tap long body with flange screwed down for iron pipe complete all as specified and as directed.

Supply and fix for in repairs for cast copper alloy CP shower rose round 75mm fixing with 15mm steel pipe or union complete all as specified and as directed.

Supply and fix in repairs for grating round doom 100mm dia of PTMT (minimum weight 25gms) all as per Cat No.111of make Prayag or equivalent of Jaguar complete all as specified and as drected.

Supply and fix in repairs for grating doom with waste hole 125mm dia of PTMT all as per Cat No.113 of make Prayag or equivalent of Jaguar complete all as specified and as drected.

S&F in repair brass CP Urinal spreader for fixing with 15 mm dia pipe all as specified and as directed.

Supply and fix in repairs brass spindel of 15mm dia, any type and in any position complete all as specified.

S & F in repair internal kit of concealed type PVC flushing cistern of 10 ltr capacity complete all as specified and directed.(make Hindware, Parryware/ Jaquor)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as directed.

S&F 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

M&L PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 75mm bore pipe with access door complete all as specified and as directed.

M&L PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 110mm bore pipe with access door complete all as specified and as directed.

M&Lfor PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

Material and labour for one coat using Dr. Fixit Pidicrete URP with one part Pidicrete URP mixed with 1.5 part cement complete all as per manufacturer's instruction and as directed. Make : Pidilite Industries Ltd or equivalent of FOSROC

Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.

M&L for precast cement concrete glossy interlocking paver block, any shape and size as approved , 80mm thick, conforming to IS 15658-2006, M-40 grade in floor/pavement laid dry to the profile complete all as specified and as directed. NOTE: Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.

M & L for Sand filling under floors for cushioning including watering and consolidation complete all as specified and as directed.

M & L for filleting in any position and to any shape in cement mortar 1:4 exc 25 but n.exc 50 Sqcm including all mitres, stops, etc. complete all as specified and as directed.

Demolition of cement concrete in ground floors , pavings, sunken floor etc (below or above ground level) complete all as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for coloured tiles 300mm x 300mm x 10mm thick of make "Johnson Endura" or equivalent of Kajaria, Somany as approved by GE, laid over and including 15mm thick screed bed in cement mortar 1:4, jointed complete all as specified and as directed.

S&F in repair Vitreous china Urinal, Half stall type, white (excluding flushing cistern) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe. Make Hindware/Parryware /Cera

S&F stainless steel auto close/ hydraulic hinge suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed. Make Prayag Cat No. 5120 or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S & F in repair health faucet cast copper alloy chromimum plated for EWC as approved quality complete all as specified and directed.

Material and labour for cutting & polishing of existing Granite/Marble/Kota stone with necessary machinery complete all as specified and as directed.

M&L for removing old glass putty from windows and providing new putty all as spd and directed

S&F 12mm thick toughned glass door complete all as spd and directed

S&F 300 long stainless steel handle heavy duty complete all as spd and directed

S&F locking arrangement stain less steel, heavy duty floor spring with pivot, Make ozone complete all as spd and directed

M&L for broken glass coping on top of walls in cement mortar 1:3 including taking down and removing rubbish complete all as spd and directed

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

K.S.JITE AND SONS

M/S. SHOURYA ENGINEERS AND CONTRACTORS

THE SAIRAM CONSTRUCTIONS