Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4.4 L
EMD Value
₹9,000
Closing Date
3 Oct 2022, 2:00 pmClosed
Executive Engineer MHCHD, Srinagar
Office of the Executive Engineer, MHCHD, Srinagar
Various pending works at Govt. 500 bedded Paediatric Hospital, Bemina, Srinagar.
2022_PWDJK_190045_1
MHCHD/TS /2022-23/108/e-tendering Dt26-09-2022
Open Tender
Miscellaneous Works
Item Wise
7 days
Govt. 500 Bedded Paediatric Hospital, Bemina
As Detailed in NIT
4 documents required · 4 mandatory
₹200
Executive Engineer MHCHD, Srinagar
₹9,000
6 Oct 2022
26 Sept 2022
3 Oct 2022
26 Sept 2022
3 Oct 2022
27 Sept 2022
Amount
Supply, Installation, testing and commissioning of heavy duty brass burner (4 inches dia) with stand fabricated out of ISA 50x50x6. Each burner to be provided with gas flow control valve with suitable size pipe.
Supply, Installation,testing and commissioning of heavy duty brass burner (6 inches dia) with stand fabricated out of ISA 50x50x6. Each burner to be provided with gas flow control valve with suitable size pipe.
Supply, Installation, testing and commissioning of LPG gas manifold 4 way for 4 cylinders backup and fitted with flexible pigtails pipes including 1/2 inches dia. non return valve and brass shut off valve on each pipe outside the kitchen at proposed site of gas bank.
Supply, Installation, testingand commissioning of needle valve with fittings for MS pipeline.
Supply, Installation, testing and commissioning of pressure gauges with valve.
Supply, Installation, testing and commissioning of heavy duty MS gas pipeline of 12 mm dia. (6 mm thick) including fittings for connecting of gas stove to main pipeline.
Supply, Installation, testing and commissioning of heavyduty MS gas pipeline of 25 mm dia(6 mm thick) as main header including all fittings. Complete system to be painted & tested on all 8 cylinders connected in line.
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-inCharge. (27.5m x 2.5m) and 3.2m depth
Providing & laying stone soling above 75 mm size including dewatering job complete including carriage of materials from nearest source to site of work by mechanical transport including loading, unloading and stacking. (27.5m x 1.5m x 0.3m) and 2.1m dia x 0.3m thickness) for manhole
Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering including dewatering job. (27.5m x 1.0m x 0.15m) and (2.1m dia x 0.3m thickness) for manhole
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth exceeding 3 m but not exceeding 4.50 m (27m x 3.2m) 2 sides
Providing laying & jointing non-pressure NP3 class socket & spigot R.C.C. pipes of specified internal dia as per BIS with Stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including dewatering job & testing of joints etc. complete including carriages, freight, loading & unloading.
300 mm dia
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Providing and laying of RCC M20 grade cement of specified grade of mix in 1:1.5:3 mix with nominal size of stone aggregate 40 mm thick crushed excluding cost of centering and shuttering.
Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string course fillets, kerbs and steps etc.
Steel reinforcement for R.C.C work TMT bars of grade Fe-500 and diameter 10mm main bars & 8mm cross bars. Total Length of 10mm bar= 278m. Total Length of 8mm bar= 84m. Spacing b/w bars = 150mm
GOOD LUCK TRADERS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .