AMC Ashok Nagar qtrs

All kinds of soil.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil -Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement:4 M sand:8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 M sand : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases for columns

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 M sand)

Providing and laying Joint free Ceramic glazed Antiskid floor tiles of size 300x300 mm of approved make and colours, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 M sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing joint free ceramic glazed wall tiles of size 300 x 450 mm of approved make and colour as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 M sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete.

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Supply & Fixing of WPC door frame and shutter of Qute or equivalent make with solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member. Shutter made of 25mm (+/- 1mm) thick WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain mat finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is suggested to be hinged to the frame with minimum of 5 inch butt hinges of SS make.

Door size upto 0.80 x 2.10 metre with necessary fittings

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pressure class 4 kg/sqcm conforming to IS 4985 jointed with solvent cement all as directed

Single tee with door 75x75x75 mm

Single tee with door 110x110x110 mm

Bend 87.5° 75 mm bend

Bend 87.5° 110 mm bend

Shoe (Plain) 110 mm Shoe

12 mm cement plaster of mix : 1:6 (1 cement: 6 P sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 P sand)

6 mm cement plaster of mix : 1:3 (1 cement: 3 P sand)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

75 to 80 mm dia pipe.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15 mm to 40 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe - 32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

150 mm diameter

Providing and fixing PTMT grating of approved quality and colour.

Circular type. 100 mm nominal dia.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia .Pipes.

25 mm nominal outer dia .Pipes.

40 mm nominal outer dia. Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work

40 mm nominal outer dia. Pipes.

Providing and laying brick jelly lime concrete on terrace / sunken floors with graded brick aggregate 25mm nominal size and 50% mortar comprising 1 lime putty ; 2 surki upto floor VII level

12 mm cement plaster mixed with water proofing compound finished with a floating coat of neat cement of mix 1:4 ( 1 cement: 4 P sand).

Dismantling of Wash basin, Water closet and sink of all types including necessary earth work, stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing unplasticised Rigid PVC SWR pipes conforming to IS 13592 Type B jointed with solvent cement including cutting the wall and making good with cement mortar 1:4 all complete.

75 mm diametre

110 mm diameter

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 M sand) and making good the wall etc. complete.

75 mm diametre

110 mm diameter

Providing and fixing PVC floor trap of self cleansing design including cost of cutting and making good the walls and floors :

Providing and fixing CP brass quarter turn bib cocks of approved brand.

15 mm nominal bore

Providing and fixing CP brass swivel type sink tap of approved brand.

15 mm nominal bore

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 M sand with polymer minimum 2% by wt. of cement used) as per specificationscomplete, including disposal of rubbish to the dumping ground within 50 metres lead: and directions of Engineer-in-charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. holder clamp to Eureopean type W.C. of Parryware / Hindware or equivalent make as approved by Engineer - in - charge.

Cutting the branches of trees hanging over the terraces at required point in the tree, cutting the cut branches into small pieces for easy loading and including disposal of the same out side the quarters complex. A) branches of girth upto 40cm

Removing and refixing the wooden door shutter after attending necessary repair etc., including sawing sides of shutters, door frames for making it operational condition all as per the direction of Engineer-in-charge.

Cleaning of terrace/loft water storage tank (inside surface area) upto 500 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Size 4.70 m dia depth 2.55m (44000 litres)

Size 3.10 m dia depth 2.95m (22000 litres)

Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.

Providing and fixing polyethylene New cover with locking arrangements upto 2000 litres capacity for polyethylene water tanks wherever required for missing/damaged including necessar bolts and nuts at all level etc., complete.

Applying crack filling compound of approved make (Crack seal of Asian Paints or Dr Fixit 201 Crack X Paste or equivalent) in wall cracks and finishing the surface level all complete.

Window shutters

Cycle shed above area upto 50 sqm

Residential complex upto terrace area of 200 Sqm.

Removing the bibcock / stop cock/pillar cock/Wheel valve(all sizes) and refixing after checking, cleaning and providing new washers or teflon tape roll (for valves) etc. as directed by the Engineer in Charge.

W/B bracket

Sink bracket

Internal work

External work (by earth work & refilling)

110mm dia

15mm nominal bore

20mm nominal bore

40mm nominal bore

Dismantling the existing damaged cuddapah stone slab over the kitchen platform including cleaning the mortar below the slab and disposal of material within 50m lead.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 100gms.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead:

Providing and fixing 600 x 450 mm mirror of approved quality with PVC beading alround neat complete.

Rectangular shape 600x450 mm internal dimensions

Rectangular shape 300x300 mm internal dimensions

Best available country wood

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Best available country wood 30mm thick

Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20nn nominal size)

Type III quarters

Float glass panes of thickness 4 mm

Providing and fixing white vitreous china WC trap including jointing to orissa pattern WC pan etc. complete all as directed by the E in C.

Demolishing lime concrete manually / by mechanical means and disposal of material within 50 m lead as per direction of Engineer in charge.

Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee including cutting and threading the pipe etc complete:

25 to 40 mm nominal bore

CREDIT in to contractors account of dismantled materials

C. P brass Bibcock/stopcock/pillar

G.I pipes

Door and windows

Please Enable Macros to View BoQ information