20/EUDC-IN/2024-25

Amount

Carriage, loading-unloading with proper stacking of following material from Central Store /department store to Site distance approx 20 Km.

Distribution Transformer 250 KVA

Distribution Transformer 400 KVA

ST Pole 11 Mtr. Long

PCC Pole 8.5 Mtr

LT PVC Cable (3.5x240/400/630) Sqmm.

LT Cable (1x240/400/630) Sqmm.

11 KV GI PIN

11 KV GI INSULATOR

ABC (3x120+1x95+1x16) Sqmm.

ACSR DOG CONDUCTOR

3 Phase DP Box

EARTHING ROD

V type X arm ms angle

11 KV DISC INSULATOR

11 KV DISC FITTING

GI WIRE 8 SWG

Laying of PVC Cable (1x240/400/630)/ (3.5x240/400/630) Sqmm.Sqmm cable with Material. (Only Cable shall be supplied by department)

Stringing & sagging of AB Cable (3x95+1x70+1x16) /(3x120+1x95+1x16) Sqmm with proper jumpring and connections with required Clamps, jumpers, piering connector. (Cost of clamps etc. shall be borne by contractor) (Only Cable shall be supplied by department)

Sagging of ACSR weasel /Racoon conductor as per RESPO norms and in the directions of supervising Engineer including cradle type guarding] fixing/mounting of material clamps fitting etc,

Mounting of 250 KVA Transformer on plinth with making all connections & fixing all requisite items/equipments as per RESSPO,s specn and safe energizsation after connecting body & neutral of transformer to earth. only transformer shall be supplied by deptt.

Demounting of 250 KVA Distribution transformer from existing plinth after opening of all connections and opening of wire mesh fencing & safe carriage upto Central store & safe unloading.

Mounting of 400 KVA Transformer on plinth (after repairing of existing plinth of 250 kva T/F) with making all connections & fixing all requisite items/equipments as per RESSPO,s specn and safe energizsation after connecting body & neutral of transformer to earth. only transformer shall be supplied by deptt.

Well type earthing with 20 Mtr. Deep boring and providing GI pipe 1.5 dia (20 Mtr. GI pipe) of Tata/Zindal make and GI strip 25x5mmx6 Mtr. Long attached with clamps L piece, Nut & Bolts and GI pipe cap.( All material shall be arranged by the Contractor.)

Fabrication, erection of wire mesh fencing 2.0 Mtr. Height including grouting of fabrication MS Angle 50x50x6 mm. Painting of fencing and support with all material as per specification around 11/.4 KV Sub-Station of size [2x(5+3)]x 2.0 meter (All material shall be supplied by the contractor.)

Fabrication, erection of single 11 Mtr ST/8.5 PCC Pole with fixing of necessary clamps, accessories required including supply & fixing of clamp, nuts & bolts, Grouting with cement, sand, brick ballast in ratio :1:4:8 and earthing as per RESPO specification & direction of E/I with fixing of T-off with fitting & tapping pole. (Only Pole shall be Supplied by the deptt.)

Construction of Transformer plinth of size 2x2x1.5 meter with the help of first class brick and masonry in the ratio 1:4 cement & sand coare. Filling the structure completely as per norms with RCC top 1:1:2 cement, sand coarse and stone grith with MS Bar and MS channel for resting transformer wheel 2x(125x65x2000)mm and plaster. (All material shall be arranged by the contractor.)

Construction of Masonary type Distribution Pilar Box 1 No. incomming and 3 No outgoing of size 1x1.5x0.6 mtr. With supply fabricated and fixing of Straight MS angle 50x50x6 mm (188 mm long), 2 nos. 500 Amp, 3 nos. 300 Amp henley Type Tailess Fuse unit, 3 nos. copper bus bar of size 1000x50x6 mm and one No. alumin. busbar 1000x5x6 mm including all civil materal required for work. (All material shall be supplied by the contractor.)

Providing and fixing of copper L Pieces with suitable nuts and bolt for 250 kva transformers with proper disconnection and reconnection.

Fabrication erection of Substation D/P on 9/11 Mtr. ST pole Long with fixing of necessary clamps accessories required including supply and fixing of straight MS Channel 100x50 mm. (2240 mm long ) one Nos with arrangement of fixing 3 Nos. pin insulator,(ST pole/ PCC Pole supplied by the deptt).

Grouting of ST/PCC pole

Providing and fixing of TPMO

Providing and fixing DO fuse set

`Providing and fixing Nut and bolts

Providing & Fixing of Suspension clamps (Insulated) with bolts & nut.

Fixing of Distribution Box with proper clamps, nuts and bolts & taking connection from ABC to distribution for supply.

Stay set complete (Grouting & concreting of stay rod 1800x16 mm. Fixing , tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule, complete in all respects)

Fixing of M.S. channel

Making of bus-bar on double pole with the help of M.S. channel, M.S. T-off, pin & pin insulator

Providing and fixing ALU LUG 240 SQMM

Providing and fixing ALU LUG400 SQMM

Providing & Fixing of Dead End clamps (Insulated) with bolts & nut.

Hoisting of cable with the help of GI pipe 4" dia each having length of 3 meter along with supply and fixing of MS brackets and GI pipe.

Providing & Fixing of I-Hook (Insulated) for above clamps with bolts & nut.

Cardel Type guarding of 11 KV line made of GI No. 6/8 SWG (GI wire shall be supplied by the department )

Fixing of guarding Angle with clamps . (All material Supplied by the contractor )

Providing and fixing of ABC CONNECTOR OTHER SIZE

Providing and fixing of NEUTRAL BARE CONNECTORS

LT PETI REPAIRING

P.S. ENTERPRISES (BID ID -4713131)

A.A. ENGINEERING CO. (BID ID -4713961)