Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC | ₹32.7 L | L1 | Accepted-AOC Being Lowest quoted amount |
| 2 | L2₹35.2 L+₹2.5 L (7.71%)Rejected-Finance VILL POST GOASI DIST PURNEA BIHAR 854301 | PURNEA | PURNEA | BIHAR | 854301 | ₹35.2 L+₹2.5 L (7.71%) | L2 | Rejected-Finance Being Higher Quoted amount |
| 3 | L3₹35.6 L+₹2.9 L (8.91%)Rejected-Finance | ₹35.6 L+₹2.9 L (8.91%) | L3 | Rejected-Finance Being Higher Quoted amount |
| 4 | L4₹38.6 L+₹5.9 L (18.2%)Rejected-Finance | ₹38.6 L+₹5.9 L (18.2%) | L4 | Rejected-Finance Being Higher Quoted amount |
| 5 | L5₹39.9 L+₹7.2 L (22.2%)Rejected-Finance | ₹39.9 L+₹7.2 L (22.2%) | L5 | Rejected-Finance Being Higher Quoted amount |
Tender Value
₹43.7 L
EMD Value
₹87,500
Closing Date
27 Jan 2023, 6:00 pmClosed
GE AF PURNEA
GE AF PURNEA, P.O - CHUNAPUR AIR FIELD, DIST- PURNEA BIHAR, PIN CODE- 854303
PROVN OF DEFICIENT B/R AND E/M WORKS IN OMQ AND SMQ AREA AT AIR FORCE STATION PURNEA UNDER GE (AF) PURNEA
2022_MES_572265_1
8006/E8
Open Tender
Civil Works
Item Rate
180 days
PURNEA
Please Refer Tender Documents
6 documents required · 6 mandatory
₹500
GE (AF) PURNEA
₹87,500
Yes
13 Feb 2023
30 Dec 2022
30 Jan 2023
30 Dec 2022
27 Jan 2023
13 Jan 2023
Amount
Dismantaling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off premises complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub-base complete all as specified and as directed.
M&L for 25mm thick PCC (1:2:4) type B0 (using 12.50 mm graded crushed stone aggregate) finished even and rough as in floor/levelling course to recieve floor finishes complete all as specified and as directed.(Window cill)
M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over with and including 15mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and as directed.
M&L for glazed ceramic tile as in vertical surfaces of size (300x200)mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match, conforming to IS-13712 Z (b) (iii) with and including over 10mm thick rendering in cement mortar (1:6) for backing of tiles, complete all as specified and as directed.
M&L for cutting holes into or through brick walls n exc 150 Sqcm built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-l complete all as specified and as directed.
S&F GI steel tubing 15 mm bore medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and as directed.
S&F PVC connection heavy duty 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S&F stop valves 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S&F brass CP sink mixer long body for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S&F pillar taps 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with or without lettered `Hot' or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
S&F swivel shower of PTMT any colour for fixing with 15mm bore pipe (Minimum weight 40gms) with and including shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and as directed.
S&F vitreous china wash hand basin white flat back of size (550x 400)mm with and including MS bracket, PVC waste pipe 32mm dia of suitable length and CP waste fitting 32mm dia brass, etc with long shank and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and as directed.
S&F tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F 75mm dia PVC (SWR) floor trap, plain with gratings including jointing with solvent cement complete all as specified and as directed.
S&F 75 mm dia PVC (SWR) Pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
S&F PVC (SWR) pipes, single socketed 75 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) Bends 75 mm dia provided with access door complete all as specified and as directed.
S&F harrison curtain rails, 20 mm dia, anodised aluminium alloy, chromium plated with and including fixing brackets, stops, rollers etc., complete all as specified and as directed.
S&F Mirror Cabinet metal framed Rectangular shaped of size (450x350) mm all as specified and as directed.
S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union, overall size (915mmx460mm) with bowl size (410mm x 330mm x 160mm) complete all as specified and as directed.
M & L for preparation of old wall surfaces including complete removal of all existing treatement, washing rubbing down and applying two coats of oil bound distemper over a coat of primer complete all as specified and as diretced.
M&L for preparing surfaces of old ceiling surface and applying three coats of white wash complete all as specified & as diretced.
Supply and fixing electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc. complete all as specified and as directed. Make:- Bajaj Model New Shakti GL or equivalent in Usha, Crompton Greaves or Jaguar & Co Pvt Ltd.
S&F exhaust fans AC single phase 230/ 240 V of size 380 mm sweep, 900 rpm with louver complete all as specified and as directed. MAKE:-HAVELLS (MODEL-TURBO FORCE SP) or equivalent make of USHA, ORIENT, BAJAJ.
Supply and fixing exhaust fan, PVC body, AC single Phase, 230V of size 300m sweep with blades, frame and louvers complete all as specified and as directed. Make:- Bajaj maxima Dxi White Dom Ex Fan or equivalent in Crompton Greaves, Havells, Almonard or Orient.
M&L for point wiring with suitable PVC csaing/ caping of 1.5 sqmm size single core multi stranded copper conductor unsheathed PVC insualted 1100 V grade FRLSH cable drawn into and including PVC casing/ caping of adequate width and length with accessories and fittings like bend, elebows, crosses, wall crossing etc for one light /fan point controlled by one switch including sunken type pressed steel box suitable for housing modular switches, sockets outlet and regulators etc and with continuous 1 No cable 1.5 sqmm copper conductor PVC insualted, unsheathed as earth wire connected to earth dolly and to be connected boxes of suitable sizes for mounting to fittings etc, complete all as specified and as directed. Note- Base plate for modular switch and socket shall be measured and paid seperately.
All as per item No 29.00 here-in -before but 2.5 sqmm copper conductor for 3 pin 15 Amps socket outler on independent board controlled by one switch with one No earth continuity copper conductor of size 2.5 sqmm complete all as specified and as directed.
M&L for modular switch piano, flush type, single pole one way 6 amps, one module complete all as specified and as directed.
M&L for modular white cover plate with frame, 1 module complete all as specified and as directed.
M&L for submain concealed PVC conduit or PVC casing/ caping wiring with 3 run of single core FRLSH, 6 Sqmm (nominal area), PVC insulated, unsheathed, multistanded copper conductor cable, 1100 Volts grade drawn through and including PVC non-metalic PVC conduit or PVC casing/ caping of suitable size, medium grade (ISI marked) with all fittings and fixing accessories on roof, wall , ceilings etc complete all as specified and as directed. Note:- (i) Three runs of 6 Sqmm cable and one run of PVC conduit / PVC casing caping in wall/ceiling shall be measured and paid as one length. (ii) Concealed wiring with PVC conduit or surface wiring with PVC Casing/ caping shall be decided as per existing or as per direction of Engineer-in - Charge.
S&F distribution board sheet metal enclosures double door 8 way, SPN, 200 Amps Bus bar 240 Volts complete all as specified and as directed.
M&L isolater / MCB SPN 240 volt, 40 Amps C curve, complete all as specified and as directed.
M&L MCB SP 240 volt, 6 to 32 Amps, C-curve, 10KA complete all as directed.
M&L ceiling rose, 3 pin PVC /Polycarboante isolated body complete all as specified and as directed.
M&L for single pole and neutral enclosure with a two pin and earth plug and socket with and including one MCB single pole 25 amp complete all as specified and as directed.
M&L for modular PVC box 1 module complete all as specified and as directed.
Supply and fixing stainless steel 304 grade heavy duty connection pipe suitable for hot/cold water of size 15 mm dia with PTMT nuts of length 450 mm complete all as specified and as directed.
shashi bhushan gupta
ALAM ENTERPRISES
M/S.M.S.Devi.Const.Co
M/s. Mohan Enterprise
M/s.Keshab Chandra Ghosh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .