MAINT/ REPAIR TO BUILDINGS INCLUDING PERIODICAL SERVICES AND OTHER B/R WORKS AT 5 RAJPUT UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description any size by changing the washers(s)/jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc. including replacement of major defective item if required, complete all as specified and directed by Engineer-in-charge. Note 1 :- The contractor shall make all arrangement for attending the different types of complaints on every day basis.Any major item required to be replaced with new one, to make the system functional shall be measured and paid for seprately as " S & F" under respective applicable item of this schedule. Old retrived item (s) as considered in 'Schedule of Credit' shall become property of the contractor. 2. Contractor shall provide minimum one plumber alongwith helper if required at complaint cell of AGE B/R-I (South) including all necessary T & P on all working days from 9AM to 5 PM .Additional workers can be engaged if nature of work required to be completed with in fixed time as desired by GE . Rate shall be quoted accordingly . Keeping in mind above said provisions. 3. Where material provided shall be paid as " S&F under respective item of 'BoQ' the payment of complaint under this item shall not be paid. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained by Engineer-in-charge.

S & F in repair chromium plated fancy type bib tap with flange fixed in 15 mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and as directed.

S & F in repair 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and as directed.

S & F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair 15 mm bore Brass CP WHB / Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15 mm bore fancy type Stop valves / angle valve (CP), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repair PVC connection 15 mm dia 45 cm long with 2 Nos PVC check nuts with washer complete all as specified and as directed.

S & F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F in repair Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms ) including fixing to steel pipe or union complete all as specified and as directed.

S & F in repair brass jumper washer, brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and as directed.

S & F in repair 15 mm dia fancy type stop valve concealed type cast copper alloy, screwed down, high pressure chromium plated with long shank including making good dismantled portion complete all as specified and as directed.

S & F in repair 32 mm to 40mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and as directed.

S & F in repair waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and as directed.

S & F in repair waste fittings brass chromium plated 40 mm dia for urinal, any type, complete all as specified and as directed.

S & F in repair waste fittings brass chromium plated 50 mm dia for stainless steel sink complete all as specified and as directed.

S & F in repair gun metal globe or gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 20 mm complete all as specified and as directed.

S & F in repair gun metal globe or gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm complete all as specified and as directed.

S & F in repair small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and as directed.

S & F in repair small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and as directed.

S & F in repair 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) with PTMT handle complete for low level flushing cistern complete all as specified and as directed.

S & F in repair 10 ltrs capacity PVC Low level flushing cistern including PVC syphon and float valve with float, PVC long bend for out let connection of cistern with WC complete fixing and connecting bend with WC / EWC complete all as specified and as directed.

S & F in repair Plastic water closet seat, black /white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F in repair chromium plated Jet for WC with 1.00 Mtr long PVC pipe including necessary GI fitting as required like toe, nipple etc complete all as specified and as directed.

S & F in repair SS grating 125 mm dia with/without hole round, fixed on floor / nahani trap, fixed with cement mortar(1:3) complete all as specified and as directed.

S & F in repair, Toilet paper holder Chromium plated brass fancy type complete all as specified and as directed.

S & F in repair , Towel Ring of PTMT / CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and as directed.

S & F in repair , CP towel rail 60 cm long complete all as specified and as directed.

S & F in repair glass shelf corner with frame chromium plated brass fancy type complete all as specified and as directed.

Taking up or down GI steel water tubing 15mm bore and connections including cleaning complete all as specified and as directed.

Taking up or down GI steel water tubing 20mm bore and connections including cleaning complete all as specified and as directed.

Taking up or down GI steel water tubing 25mm bore and connections including cleaning complete all as specified and as directed.

M&L cutting chases pinning in brick masonary and making good to facing where required and pointing in cement and making good in CM 1:3 to end or edge of sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing cutting n.exc. 10 cm in girth.

Refixing old 15 mm bore GI tubing and connections in new or old position (Walls, ceiling, floors, etc.) as directed complete all as specified and as directed.

Refixing the old GI steel water tubing and connection of 20mm bore in new / old position with and including all fittings, to roofs,walls or ceiling as directed complete all as specified and as directed.

Refixing the old GI steel water tubing and connection of 25 mm bore in new / old position with and including all fittings, to roofs,walls or ceiling as directed complete all as specified and as directed.

S&F galvanised steel water tubing 15mm bore 'medium grade' with and including all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

S&F galvanised steel water tubing 20mm bore 'medium grade' with and including all fittings and fixed to walls, ceilings or laid in floors complete all as specified and as directed.

S&F galvanised steel water tubing 25mm bore 'medium grade' with and including all fittings and fixed to walls, ceilings or laid in floors complete all as specified and as directed.

Supplying and fixing of CPVC pipes (20 mm outer dia) SDR 11 & Plain and brass threaded CPVC SDR 11 fittings in trenches/walls, including includes all plain CPVC fittings and pipe cutting fixing with CPVC solvent cement and testing, complete all as specified and as directed.

Supplying and fixing of CPVC pipes (25 mm outer dia) SDR 11 & Plain and brass threaded CPVC SDR 11 fittings in trenches/walls, including includes all plain CPVC fittings and pipe cutting fixing with CPVC solvent cement and testing, complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, ashers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs 1.00mm thick stainless steel plate rack overall size (31X36X10 inch) fixed with steel screws complete all as specified and as directed.

S & F Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste coupling 32mm size full thread, complete all as specified and as directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe etc, including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for connecting low level cistern, complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl supply and fixing of PVC pipe from cistern to for pedestal pan complete all as specified and as directed.

S & F in repair vitreous China urinal Half stall type, white with grating and unions for discharge pipe including providing and fixing plugs, bedding urinal with 15 mm bore urinal spreader and waste coupling of PTMT min wt for urinal for urinals, (Minimum weight 32mm), & waste pipe against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as specified and as directed.

Supply & fixed Vitreous China urinal partition white of size 310 X 700 mm complete all as specified and as directed.

S&F in repairs 100 mm bore of cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and as directed.

S&F in repairs 75 mm bore of cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and as directed.

S&F in repairs 110 mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors with joints in cement mortar (1:3), laid in trenches, floors all as directed including making good to match with existing surfaces complete all as specified and as directed.

S&F in repairs 75 mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors with joints in cement mortar (1:3), laid in trenches, floors all as directed including making good to match with existing surfaces complete all as specified and as directed.

S&F in repair, oval access door 110 mm bore of PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and as directed.

S&F in repair, oval access door 75 mm bore of PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and as directed.

S&F in repair, 110 mm bore of PVC (SWR) oval access door bends any radius complete all as specified and as directed.

S&F in repair, 75 mm bore of PVC (SWR) oval access door bends any radius complete all as specified and as directed.

S & F in repair 100 mm bore CI bends / branch pieces (any radius) for oval access doors complete all as specified and as directed.

S & F in repair 75 mm bore CI bends / branch pieces (any radius) for oval access doors complete all as specified and as directed.

S & F in repair, PVC (SWR) floor trap, with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and with solvent cement etc to facilitate dismantling old CI trap and making good complete all as specified and as directed.

M & L for 100 mm bore of cast iron pipe (except trap/ pipe any type) and fitting if lead joint are provided in lieu of cement joints complete all as specified and as directed.

M & L for 75 mm bore of cast iron pipe (except trap/ pipe any type) and fitting if lead joint are provided in lieu of cement joints complete all as specified and as directed.

S&F in repair, MS clamps for CI/PVC pipesof any bore made out of 50 mm x 5 mm flat and 16 mm dia round bars, including bolts and nuts and securing to wall in PCC (1:2:4) and making good in cement mortar (1:3) complete all as specified and as directed.

S&F rotational moulded polyethelene water storage tank capacity 500 litres 'ISI Marked' cylindrical vertical with closed top hoisted and fixed in position, with 25 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, including dismantling water tanks exc 250 litre but not exceeding 500 litre and removal from site complete all as specified and as directed.

All as per srl item no 63.00 here-in-before but capcity 1000 ltrs.

All as per srl item no 63.00 here-in-before but capcity 2000 ltrs.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 110mm bore of pipe including taking down rain water pipes (any size or pattern) including all fittings bends etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 75 mm bore of pipe including taking down rain water pipes (any size or pattern) including all fittings bends etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius for 110mm bore of pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius for 75 mm bore of pipe complete all as specified and as directed.

Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 250 litres but not exceeding 500 Litres capacity of tanks complete all as specified and as directed.

Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 500 litres but n.exc 1000 Litres capacity of tanks complete all as specified and as directed.

S & F in repair HDPE PVC lid (cover) for 1000 to 2000 Ltrs capacity PVC tank complete all as specified and as directed.

S & F in repair HDPE PVC lid (cover) for 500 Ltrs capacity PVC tank black/White complete all as specified and as directed.

Attending complaint for petty repair to easing of Doors/Window/Cup Board shutters by tightening of hinges / handles / Al-drop bolt / tower bolt / knobs, hasp and stapple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts,sliding bolts, replacement of looking mirror etc complete including replacement of major defective item if required, complete all as specified and directed by Engineer-in-charge. Note 1 :- The contractor shall make all arrangement for attending the different types of complaints on every day basis.Any major item required to be replaced with new one, to make the system functional shall be measured and paid for seprately as " S & F" under respective applicable item of this schedule. Old retrived item (s) as considered in 'Schedule of Credit' shall become property of the contractor. 2. Contractor shall provide minimum one Carpenter alongwith helper if required at complaint cell of AGE B/R-I (South), including all necessary T & P on all working days from 9AM to 5 PM .Additional workers can be engaged if nature of work required to be completed with in fixed time as desired by GE . Rate shall be quoted accordingly . Keeping in mind above said provisions. 3. Where material provided shall be paid as " S&F under respective item of 'BoQ' the payment of complaint under this item shall not be paid. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained by Engineer-in-Charge.

S & F in repair 9 mm Plywood, grade BWR, type BB,not exceeding1.50 sqm fixed with nail / screw to timber/ Aluminium / Steel frame work complete all as specified and as directed.

S & F in repair CP Peg set of 06 hanging complete all as specified and as directed.

Taking down chowkhats of frames n exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exceeding 2 sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 sqm each and refixing in same opening, after resecuring or easing & adjusting,complete all as specified.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening, after resecuring or easing & adjusting,complete all as specified and as directed.

S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F 35 mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and as directed.

S & F 19 / 20mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators 114.30 mm x 44.45 x 3.18 mm with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed.

S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters powder coating (any colour decided by GE) aluminium section in which size of shutter top members 47.62 x 44.45 x 3.18 mm , shutter bottom member 100 x 44.45 x 3.18 mm , shutter vertical members 47.62 x 44.45 x 3.18 mm and shutter lock rail member of size 63.50 x 44.45 x 2.40 mm including necessary joining cleats, glazing clips, rubber neoprane packing, fittings (150mm long handles - 2 Nos , 100 mm long hinges - 3 Nos, 200 mm long Tower Bolt - 01 Nos) each door anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron)window and ventilator shutters, glazed shutter having stile and rails size 44.60 x 30.00 x 3.18 mm thick with triangular aluminium beading of 15 mm size side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings, such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) complete in each shutter complete all as specified and as directed.

S & F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and as directed.

S & F 4 mm thick aluminium composite panel exterior grade (0.5mm PVDF coated Aluminium skin on top & bottom plus 3mm thick polyethylene core) on all-round RCC /Brick column/wall/Fascia's / M.S. section / Aluminium section structure /dead walls / under side sky light upto all heighs in required colour/ size complete all as specified and as directed.

S&F in repair mild steel mortice lock 4-lever vertical type, size 100 mm complete all as specified and as directed.

S & F in repair 100 mm long MS butt hinges 'medium weight' cold rolled welded to steel frame work complete all as specified and as directed.

S & F in repair aluminium alloy, anodised, 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S & F in repair 150 mm aluminium anodised handle cast type, complete all as specified and as directed.

S & F in repair steel window handles (right & left) and peg stays etc (as per sample) complete all as specified and as directed.

S&F 4.80 mm thick sheet glass, ordinary quality and glazing with aluminium / wooden beading with SS screws in squares exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specifiedand as directed.

S & F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or tinned tacks complete all as specifiedand as directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane including hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specifiedand as directed.

S & F 3 mm thick ordinary glass sheet, glass is ground or obscured or frosted, on one side, pin head type & glazing with oil putty / beading in squares not exceeding 0.5 sqm in each pane including hacking out old broken glass complete all as specifiedand as directed.

S&F in repair Aluminium body (extruded aluminium section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 kg and make good complete all as specified and as directed.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specifiedand as directed.

S&F in repair block board grade 2 quality , exterior grade commercial type 18/19 mm thick fixed in repair in cupboard shutter & parations including 0.90 mm thick decorative laminate type 1 on one side surface finish of colour and pattern as approved fixed with approved adhesive complete all as specified and as directed.

S&F in repair, 25 mm bore mild steel 0.08mm thick curtain rod pipe with PVC ribbed lamination of required length for curtain rods including two fixing mild steel powder coated matching colour full round or half round with fixing nuts (bracket holders),& PVC golden finish end knobs(Two noumber for each curtain rod of any length) and PVC gold finish curtain ring @ 3 nos/feet complete all as specified and as directed.

S&F in repair, aluminium sheeting 0.50 mm thick, fixed to wooden / PVC shutters with CP screws including cutting to required size etc complete all as specifiedand as directed.

M&L for welding in repair in any situation and in any position such as hinges and similar articles etc for steel door, gates, window, ventilatiors and grills etc for upto four stoery building complete all as specifiedand as directed.

Demolitin of brickwork built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles complete all as specifiedand as directed.

M & L for Brick work with sub class'B' bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) complete all as specifiedand as directed.

All as per srl item No -109.00 here-in-before, but except brick and built in cement mortar (1:6).

M & L Half brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specifiedand as directed.

Taking down cement plaster on brick walls, concrete surfaces, raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 10 mm thick ready mix plaster on ceiling surfaces / Internal walls, finished even and smooth complete all as specified and as directed.

M&L for 15 mm thick ready mix plaster on brick / concrete surface of external walls, finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving etc not exc 15 cm thick above or below ground level complete all as specifiedand as directed.

M&L for 40 mm thick PCC (1:2:4) Type B-1 (using 20 mm graded crushed stone aggregate), as in floors etc finished even and smooth without using extra cement complete all as specifiedand as directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in subbase to flooring complete all as specifiedand as directed.

M&L for factory made 60 mm thick M-35 grade machine pressed cpolured precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and content and pigment, over and including 50 mm thick sand coushioning complete all as specified and as directed.

M & L for cement concrete coloured tiles glossy finish 300 x 300 x 22 mm thick machine pressed; set jointed with grey cement and pigments and pointed in neat cement slurry in floors, and cut and polished over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M & L for cement concrete type C-1, 1:3:6 (using 20 mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and as directed.

M & L for, cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, posts, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded aggregate in sub base of floors etc. complete all as specified and as directed.

M&L for non skid coloured ceramic tiles jointless 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match over and including 15mm thick screed bed in cm 1:6 for laying floor finish including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M & L for Glazed ceramic coloured tiles as per IS-13753, 300mm x 600mm x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surfaces such as skirting /dado etc. white or colour cement to match over and including 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing coat including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry andpointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado/risers of steps etc set and jointed in neat cement slurry and pointed in coloured cement.over and incl rendering 10mm thick in CM (1:4) and finished rough, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M&L for vitrified ceramic tiles 9-10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed 15mm thick in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M&L 9-10 mm thick light shade vitrified ceramic tiles (square/rectangular) polished, area of each tiles not exceeeding 0.36 sqm, in skirting / dado / risers of steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl rendering 10mm thick in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

M & L for rolled mild steel in Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections complete all as specified. (Fe 410-W (Gde-E- 250) quality-A) complete all as specified and as directed.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified. (Fe 410-W (Gde- E- 250) quality- A) complete all as specified and as directed.

M & L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

S &F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including demolition of wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / Slab / blankets, any thickness , including cover fillets complete all as specified and as directed.

S & F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. including demolition of wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / Slab / blankets, any thickness , including cover fillets complete all as specified and as directed.

M & L for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of interior primer, over & including 1 mm thick of wall care Putty complete all as specified and as directed.

M & L for preparing old painted surfaces of wall and applying one coats of distemper oil emulsion, including reqd putty to touch up /fill the holes etc complete surface complete all as specified and as directed.

M & L for preparing of plastered surfaces of wall and applying two coats of plastic emulsion over a coat of interior primer, over & including 1mm thick of wall care Putty complete including complete removal of existing treatment complete all as specified and as directed.

M & L for preparing of plastered surfaces of ceiling and applying two coats of plastic emulsion over a coat of interior primer, over & including 1mm thick of wall care Putty complete including complete removal of existing treatment complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L preparing old plastered or unplastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of interior primer, including reqd putty complete removal of existing surface complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for four storey building complete all as specified and as directed.

M&L for preparation of old plastered wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for four storey building complete all as specified and as directed.

M & L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including preparation of surface. Two or more coats on new / old plaster work complete all as specified and as directed.

M & L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new steel surfaces of any description, exc 10 Cms in width or girth, over and including red oxide primer & preparation of surfaces, complete all as specified and as directed.

M&L for one coats of synthetic enamel paint on old steel surfaces of any description, exc 10 Cms in width or girth, including preparation of surfaces, complete all as specified and as directed.

R.P Builders (BID ID -3352204)

RADHEY CONSTRUCTION (BID ID -3353884)

M/S Davinder Kumar (BID ID -3355238)

M/S Parmod Johar (BID ID -3354175)