REPAIR REPLACEMENT OF JOINERY FALSE CEILING AND CERTAIN BUILDINGS WORKS INSIDE TECHNICAL AREA DMSRDE KANPUR UNDER AGE I R AND D KANPUR

Taking down chowkhats of frames (wooden / aluminium) with shutters without taking off shutters from the frame area exc 1.5 Sqm but not exc 4.00 Sqm each complete all as specified and directed.

M&L for 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as specified and directed.

M&L 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints compete all as specified and directed.

Taking down wooden cupboard / Aluminium partition wall any description not exceeding 1 Sqm each panel complete all as speceifed and directed of frames with shutters (with out taking off shutters from the frame) area etc 1.5 Sqm but not etc 4.00 Sqm each.

M&L for fully glazed cupboard with openable shutter having powder coated aluminium section of size 44.45 x 44.45 x 2mm thick for frame and section for shutter 45 x 25 x 1.5mm thick & 4.8mm thick plain/figured /tinted glass sheet with necessary jointing cleats, glazing clips, rubber packing, aluminium and rubber beading, mortice lock of brass of size 65mm,vertical type four levers, aluminium hinges of size 75mm, 125mm long aluminium handle fabricated type including proper fixing of aluminium frame with screw and PVC gully of adequate size as per requrement of site complete all as specified and directed (Note Colour of powder coating and glass will be approved by AGE(I)

M&L for 15 micron natural colour having powder coated aluminium section partations partily glazed partily paralled area of each panel not exceeding one sqm with section 38mm x 63.5mm x 1.50mm including necessary joints cleats, glazed clips rubber packing screw & 4.8mm thick plain/tinted glass two numbers upper panel and 12mm thick prelaminated particle board BWA type molamine finish (both side) on bottom panel (0.80mmheight) including necessary fittings etc complete all as specified and directed.(Colour of glass shall be approved by AGE(I) R&D Kanpur

Taking down chowkats or frame with shutter without taking off shutter from the frame area not exceeding 1.5 sqm each complete all as specified and directed.

M&L for 15 micron natural coloured having powder coated aluminium section door frame 115 mm x 44.50 mm x 2.0 mm with top rail, bottom and lock rail and stiles 85mm x 44.45 mm x 1.5 mm including aluminium snap beading of size 19.05 mm x 17.27 mm necessary jointing cleats, glazing clips, rubber packing, screw and 4.8mm thick plain/figured glass on panels including necessary fittings such as American type handle 200 mm size including floor spring (ISI mark) locking arrangement (mortice lock), 03 hinges of size 125mm aluminium anodised medium grade in each complete all as specified and directed.(Colour of glass shall be approved by AGE(I) R&D Kanpur.

S&F in repair door closer hydraulically regulated (aluminium dia cast) designation No. 3 universal type sutable for door shutter of 851 to 1000mm width and of wt between 61 to 80 Kg complete all as specified and directed.

Dismantling of ceiling boards and wall (fibre, insulation, etc or perforates/ insulation boards) any thickness, including cover fillets & Snap Grid complete all as specified and directed