REPAIR TO STEEL AND WOODEN FURNITURE, RE-CANNING OF CHAIRS AT JINDRAH UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

REPAIR TO GI PIPE CHARPOY WITH HARD PLYTOP Drg No FD-220

S&F in replacement of u/s elbow galvanized iron 32 mm dia 3 ways complete all as specified and directed. Note:- Weight of each elbow not less than 450 grams.

S&F in replacement of u/s check nut galvanized iron 32 mm dia, complete all as specified and directed. Note :- Weight of each check nut not less than 125 grams.

S&F in replacement of long rail of 32 mm dia galvanized iron pipe medium grade incl cutting threading at both ends complete all as specified and directed.

Fixing only in repairs short rail of 32 mm dia GI pipe medium grade incl cutting, threading as required for short rail of GI Charpoy complete all as specified and directed. Note :- Short rails shall be converted from long rail retrieved vide item No 1.03 above.

Fixing only in repairs legs of 32 mm dia GI Pipe medium grade incl cutting, threading at one end as required for legs as per existing size incl S&F 1.6 mm thick, 40 mm dia MS Sheet base plate welded on another end complete all as specified and directed. Note :- Legs shall be converted from pipe retrieved vide item No 1.04 above.

RE-CANNING OF CHAIRS :-

Taking out old u/s cane from chairs etc and re-canning of wooden chairs, dressing stool, Bin solied linen etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality complete all as specified and directed. Drg No FD-228,229, 279,280,252 & 244

RE-CANNING/RE-WEAVING TO CHAIR VERANDAH :- Drg No FD-256/259

Taking out old U/S cane from chair verandah and recanning seat and back with new 4 mm wide half round white plastic cane of superior quality incl painting with two coats of white synthetic enamel paint and preparing of old steel surfaces complete all as specified and directed. Drg No FD-259

Taking out old U/S Nylon newar from chair verandah and re-weaving seat and back with virgin quality of white nylon newar 50 to 55 mm wide incl painting with two coat of white synthetic enamel paint and preparing of old steel surfaces complete all as specified and directed. Drg No FD-256

CHAIR DINING ;-S&F in repairs following parts of chair dining of 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Drg No FD-16(M)/203/ 279.

Rear Legs

Front Legs

Side rail of seat frame including drilling holes for weaving. (Spacing of holes shall be as per existing)

Front/back rails of seat frame including drilling holes for weaving. (Spacing of holes shall be as per existing)

Bottom stiffener

Back stiffener

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WRITING:- S&F in repairs following parts of chair writing with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Drg No FD-20(M)/202/280.

Rear legs

Front Legs

Side rail of seat frame including drilling holes for weaving. (Spacing of holes shall be as per existing)

Front/Back rails of seat frame including drilling holes for weaving. (Spacing of holes shall be as per existing)

Bottom stiffener

Back stiffener

Arm rest

M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR DINING (MAP) ;-S&F in repairs following parts of chair dining of 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Drg No FD/E6/MAP/10 & FD/E6/MAP/10 (R).

Rear Legs

Front Legs

Side rail of seat frame

Front/back rails of seat frame

Foam cushioned of 75mm, 40 density with fabric on seat of 12mm thick ply

Bottom stiffener

Vertical back stiffener

Nylon buffers on the bottom of legs

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR EASY:- S&F in repairs following parts of the chair easy with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Drg No FD-17(M)/201 /229.

Rear Legs

Front Legs

Side Rails

Front/Back Rails

Back Stiffener

Bottom Stiffener

Arms rest

M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

REPAIR OF PEG TABLE :- S&F in repairs of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified and directed. Drg No FD-236/266 /277/384.

Long rail

Short rail

Side stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed.

M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

Table Writing : S&F in repairs to the following parts of table writing with Ist class hard wood(teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Drg No FD-275.

Long rail of table frame

Short rail of table frame

Drawer including chromium plated knob of 40mm Dia

Bottom centre stiffener

Bottom side stiffener.

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed.

M&L for polishing of table writing with high class French polish on all exposed surfaces except top & bottom incl matching new components with old one after preparation of surfaces complete all as specified and directed.

REPAIR TO TABLE 900mm x 600mm WITH OUT DRAWER:- S&F in repairs of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed. Drg No FD-231/284.

Long Rail

Short Rail

Bottom Side stiffener

Bottom Centre stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed.

M&L for polishing of table 900x600mm w/o drawer with high class French polish on all exposed surface except top & bottom incl matching new components with old after preparation of surface complete all as specified & directed

REPAIR TO TABLE DINING 06 PERSON :- S&F in repairs of following parts of table dining 06 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed. Drg No FD-239/269 /273.

Taking down old u/s top of table dining 06 pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed.

Long rail

Short rail

Stiffener

M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

CHAIR SCHOOL WITH HAND BOARD Drg No FD/E6/MAP/05

Removal of old u/s one piece PVC seat and back from chair school with hand board and S&F new one piece PVC seat and back with fixed to frame with suitable size of screws complete all as specified and directed by Engr-in-Charge.

Removal of old u/s top from chair school with hand board and S&F new top made out of 18 mm thick prelaminated particle board with edging fixed to frame with suitable size of screws complete all as specified and directed by Engr-in-Charge.

REPAIR OF TEAPOY : S&F in repairs of the following parts of teapoy with Ist class hard wood (teak) as per existing shape and size duly planned shown on drawing complete all as specified and directed. Drg No FD-232/ 278/382.

Long rail

Short rail

Side stiffener

Centre stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed.

M&L for polishing of teapoy with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE 900mm x 900mm:- S&F in repairs following parts of the table 900x900mm with Ist class hard wood (teak) as per existing shape and size duly Planned as shown on drawing complete all as specified and directed. Drg No FD-88(M)/ 291.

Long rail

Short rail

Taking out old u/s top and S&F new top of made of 18/19mm thick pre-laminated particle board one side teak wood face and other side white balancing incl 6mm thick teak wood edging all round complete as shown in drg and directed.

M&L for polishing of table 900x900mm with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

SOFA SET 5 SEATER Drg No FD-281/373

S&F of cushion foam for sofa set size 525x525x100mm, 32 density (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs,180/- per RM

M&L for polishing of sofa set 1 (one) seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES :- Drg No FD-67 (M)/351 /1031

Removal of old existing u/s shutter (Single Leaf) of almirah large steel and S&F new shutter made of 1 mm thick PBI sheet as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.

All as per item No 16.01 above but shelves.

All as per item No 16.01 above but cover plate of locks.

Removing u/s lock of almirah large and S&F new brass lock 6 levers Godrej pattern as per existing size with duplicate keys complete all as specified and directed

Removing of old u/s lock assembly and S&F new lock assembly of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer and preparation of new steel surfaces complete all as specified and directed.

Removing of old u/s handle of almirah and S&F new chromium plated steel handle of existing shape and size complete all as directed.

Removing of old u/s key plate and S&F of new Chromium plated key plate fixed with screw and nuts of almirah large steel complete all as directed.

Removing of old u/s leg of almirah large steel and S&F new leg made of 1 mm thick PBI sheet with gas welding as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.

M&L for painting spray painting of almirah large steel with two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.

REPAIR TO ALMIRAH MEDIUM STEEL WITH SHELVES :- Drg No FD-67 (M)/350 /1032

All as per item No 16.01 here-in-before but shutter of Almirah Medium

All as per item No 16.01 above but Shelves of Almirah Medium

All as per item No 16.01 above but Cover plate of locks of Almirah Medium

All as per item No 16.01 above but locks of Almirah Medium

All as per item No 16.01 above but lock assembly of Almirah Medium

All as per item No 16.01 above but Handle of Almirah Medium

All as per item No 16.01 above but Key Plate of Almirah Medium

All as per item No 16.01 above but Legs of Almirah Medium

All as per item No 16.01 above but Painting of Almirah Medium

LOCKER BED SIDE STEEL Drg No FD-257/1029

All as per item No 16.01 here-in-before but shutter of Locker steel

All as per item No 16.01 above but shelves of Locker steel

All as per item No 16.01 above but Handle 'D' type of Locker steel

All as per item No 16.01 above but Legs of Locker steel

All as per item No 16.01 above but Painting of Locker steel

Removing of old u/s hasps and stapple and S&F of new Chromium plated hasps & stapple fixed with rivets of locker steel complete all as directed.

REPAIR TO CHAIR CB STEEL WITH ARMS Drg No FD-75(M)

Removal of old u/s seat frame and S&F new seat frame of 1st class hard teak wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed.

All as per item No 19.01 her-in-before but back frame

Removal od old u/s arms of chair CB steel with arms and S&F new arms made of 1st class hard teak wood duly planned,finished smooth with black hish class polish and fixed with steel screws of required size complete all as specified and directed.

M&L for painting to chair CB steel with arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

REPAIR TO CHAIR VERANDAH Drg No FD-256/259/359

S&F in repairs following parts of chair verandah as per existing shape and size as shown on drawing complete all as specified and directed.

Legs with arm rest of 19mm dia MS conduit 1.5mm thick incl one coat of red oxide primer.

Seat frame of 19mm dia MS conduit 1.6mm thick incl one coat of red oxide primer

Back frame of 19mm dia MS conduit 1.6mm thick incl one coat of red oxide primer

M&L for painting with one coat of white synthetic enameled paint on new/old steel surfaces.

REPAIR TO TABLE OFFICE CLK/TYPIST STEEL Drg No FD-84(M)/1004

Taking down old u/s top of table Clk/Typist and S&F new top of 18mm thick pre-laminated particle board exterior grade one side teak face and other side white balancing including 4mm thick teak wood beading complete all as specified and directed.

Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

Taking down old U/S long rail table office clk/typist and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

All as per item No 21.03 above but short rails

All as per item No 21.03 above but stiffener

All as per item No 21.03 above but legs

Taking down old u/s PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

M&L for painting with two coats of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

Removal of old u/s lock and S&F new lock of 06 levers Godrej pattern with two keys completed all as specified and directed.

REPAIR TO TABLE 3' x 2' STEEL WITH DRAWER Drg No FD-1008

Taking down old u/s top of table 3' x 2' and S&F new top of 18mm thick pre-laminated particle board exterior grade one side teak face and other side white balancing including 4mm thick teak wood beading complete all as specified and directed.

Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

Taking down old u/s long rail table office 3' x 2' and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

All as per item No 22.03 above but short rails

All as per item No 22.03 above but stiffener

All as per item No 22.03 above but legs

Taking down old u/s PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

M&L for painting with two coats of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

Removal of old u/s lock and S&F new lock of 06 levers Godrej pattern with two keys completed all as specified and directed.

REPAIR TO TABLE 3' x 2' STEEL WITHOUT DRAWER Drg No FD-1007

Taking down old u/s top of table 3' x 2' and S&F new top of 18mm thick pre-laminated particle board exterior grade one side teak face and other side white balancing including 4mm thick teak wood beading complete all as specified and directed.

Taking down old u/s long rail table office 3' x 2' and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

All as per item No 23.02 above but short rails

All as per item No 23.02 above but stiffener

All as per item No 23.02 above but legs

Taking down old u/s PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

M&L for painting with two coats of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr-in-Charge

REPAIR TO TABLE 3' x 3' STEEL Drg No FD-1009

Taking down old u/s top of table 3' x 3' and S&F new top of 18mm thick pre-laminated particle board exterior grade one side teak face and other side white balancing including 4mm thick teak wood beading complete all as specified and directed.

Taking down old u/s long rail table office 3' x 3' and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr-in-Charge

All as per item No 24.02 above but short rails

All as per item No 24.02 above but stiffener

All as per item No 24.02 above but legs

Taking down old u/s PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

M&L for painting with two coats of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr-in-Charge

REPAIR TO CHAIR WRITING MAP Drg No FD/E6/MAP/12

Removal of old u/s tapestry of seat frame and S&F new tapestry of seat frame approved by Engr-in-Charge with PVC liping all round complete all as specified and directed by Engr-in-Charge. Note- Cost of tapestry shall not be less than Rs 180/- Per RM.

All as per item No 25.01 above but back frame

Removal of old u/s hand rest of chair writing MAP and S&F new hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front, complete all as specified and directed by Engr-in-Charge

Removal of old u/s leg frame and S&F new leg frame of cantilever type MS tubular frame of size 25mm x 10mm complete all as specified and directed by Engr-in-Charge

Removal of old u/s foam cushioned from seat & back and S&F new moulded foam cushioned 40mm density as shape and size and fixed over 12mm thick hot pressed plywood with PVC liping all round, complete all as specified and directed by Engr-in-Charge

Taking down old u/s rubber stopper and S&F new rubber stopper at the bottom of leg.

BED HARD STEEL Drg No FD/E6/MAP/08(R)

Removal of old u/s plywood from bed hard steel and S&F in repairs 12mm thick ply wood top of size 1950mm x 900mm (Single piece)BWR Grade ISI Mark with MS screws, complete all as specified and directed by Engr-in-Charge

Removal of old u/s pre-laminated particle board head side and foot side from bed hard steel and S&F in repairs 18mm thick pre-laminated particle board head side and foot side with MS screws, complete all as specified and directed by Engr-in-Charge

Taking down old u/s PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

TABLE BED SIDE Drg No FD/E6/MAP/15(R)

Removal of old u/s top from table bed side and S&F new top made out of 18 mm thick prelaminated particle board with edging fixed to frame complete all as specified and directed by Engr-in-Charge.

Removal of old u/s side from table bed side and S&F new side made out of 18 mm thick prelaminated particle board with edging fixed to frame with suitable size of screws complete all as specified and directed by Engr-in-Charge.

Removal of old u/s back ply from table bed side and S&F new back ply made out of 6 mm thick plywood fixed to frame with suitable size of screws complete all as specified and directed by Engr-in-Charge.

Removal of old u/s drawers from table bed side and S&F new drawers made out of 18 mm thick prelaminated particle board with edging complete all as specified and directed by Engr-in-Charge.

Removal of old u/s handle from table bed side and S&F new handle of size 100 mm long chromium plated complete all as specified and directed by Engr-in-Charge.

Removal of old u/s telescopic channel from table bed side and S&F new telescopic channel complete all as specified and directed by Engr-in-Charge.

VEE KAY IND

KHAJURIA BUILDERS

M/S HARJEET ENTERPRISES

TULSI RAINA AND SONS