Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹28.7 L+₹5.9 L (26.0%)Rejected-Finance ROOM NO 206 PART III GANESH MURTI NAGAR COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹30.2 L+₹7.4 L (32.6%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹36.6 L+₹13.8 L (60.6%)Rejected-Finance NOT AVAILABLE | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹38.5 L+₹15.7 L (69.0%)Rejected-Finance 4 S1 A 405 ZODAIC MARATHON NEXZONE NH4 PALASPE PHATA REES RAIGAD MAHARASHTRA 410 206 | RAIGAD | MAHARASHTRA | 410206 | L5 | Rejected-Finance Being other than lowest |
| Sl No | Description | Qty | Unit | satyanarayan conastruction L2 | M S CONSTRUCTIONS L1 | JANKI ENTERPRISES L5 | RUPESH CONSTRUCTION CO L3 | SAHU AND SAHU CO. L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of lime/cement concrete provided as mass concrete in sunken complete all as specified and directed by Engr-in-Charge. | 20 | Cum | 100 ₹2,000 Lowest | 280 ₹5,600 | 400 ₹8,000 | 150 ₹3,000 | 200 ₹4,000 |
| 2.00 | M&L for cement concrete 1:5:10 type E2 using 40mm graded stone coarse aggregate in sunken floor complete all as specified and directed by Engr-in-Charge. | 20 | Cum | 1,250 ₹25,000 | 400 ₹8,000 Lowest | 2,000 ₹40,000 | 2,500 ₹50,000 | 2,000 ₹40,000 |
| 3.00 | Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water complete all as specified and directed by Engr-in-Charge. | 1,440 | Sqm | 10 ₹14,400 Lowest | 90 ₹1,29,600 | 20 ₹28,800 | 10 ₹14,400 Lowest | 20 ₹28,800 |
| 4.00 | M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed by Engr-in-Charge. | 800 | Sqm | 120 ₹96,000 | 80 ₹64,000 Lowest | 120 ₹96,000 | 120 ₹96,000 | 150 ₹1,20,000 |
| 5.00 | M & L for rendering 5mm thick in CM 1:3 on ceilling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. | 450 | Sqm | 100 ₹45,000 | 80 ₹36,000 Lowest | 100 ₹45,000 | 100 ₹45,000 | 150 ₹67,500 |
| 6.00 | M & L for preparing newly plastered surfaces of wall, priming with alkali-resistant priming paint and applying two coats of distemper oil emulsion, white or tinted over 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge. | 800 | Sqm | 25 ₹20,000 Lowest | 30 ₹24,000 | 65 ₹52,000 | 30 ₹24,000 | 25 ₹20,000 Lowest |
| 7.00 | M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. | 450 | Sqm | 6 ₹2,700 Lowest | 6 ₹2,700 Lowest | 20 ₹9,000 | 9 ₹4,050 | 10 ₹4,500 |
| 8.00 | S & fixing as in repairs internal assembly syphonic /non syphonic type for PVC flushing cistern of cap 10 Ltr | 50 | Each | 650 ₹32,500 | 400 ₹20,000 | 1,000 ₹50,000 | 150 ₹7,500 Lowest | 800 ₹40,000 |
| 9.00 | S&F in repairs Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as directed ( Make : as per sample) | 50 | Each | 150 ₹7,500 | 80 ₹4,000 | 80 ₹4,000 | 30 ₹1,500 Lowest | 40 ₹2,000 |
| 10.00 | Treatment of sunken floor slab comprises of the following specifications and all as specified
(i) M&L for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely. 40 mm avg thk pcc 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding conc to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed
(ii) Rendering of uneven surfaces with 6 mm thick CM 1:4 mixed with and incl integral WPC @3% of weight of cement consumed fill it with water and check dampness and seepage where dampness and seepage noticed nozzles shall be fixed and grouting carried out.
(iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty" (iv) After drying putty wash the slab and sides of sunken portion with water and make it clean and clear
(v) M&L for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall be 1 mm. When the second layer is still sticky , coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed.
"(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20 mm thk cm 1:4 mixed with and including integral WPC 3 % of cement consumes as per manufacures specification including rounding of corners and junctions sloping towards spout
Note:Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage seepage and to the entire satisfaction of GE . Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. the treatment shall be carried out by authorised applicators of chemicals.
(vii) All pipes laid in sunken portion shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anticorrossive black japan paint.
(viii) Height up to and including 14th floor." | 190 | Sqm | 450 ₹85,500 | 150 ₹28,500 Lowest | 500 ₹95,000 | 1,200 ₹2,28,000 | 350 ₹66,500 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NAVY NAGAR
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
DAY TO DAY MAINTENANCE OF CERTAIN BR ITEMS AT RASHI AREA UNDER AGE BR II NAVY NAGAR
2025_MES_732201_1
8559/E8
Open Tender
Civil Works
Item Rate
270 days
GE NW NAVY NAGAR COLABA MUMBAI
Class D and Category a(i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR
₹90,000
1 Dec 2025
23 Sept 2025
23 Oct 2025
23 Sept 2025
21 Oct 2025
7 Oct 2025
Amount
Demolition of lime/cement concrete provided as mass concrete in sunken complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete 1:5:10 type E2 using 40mm graded stone coarse aggregate in sunken floor complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water complete all as specified and directed by Engr-in-Charge.
M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed by Engr-in-Charge.
M & L for rendering 5mm thick in CM 1:3 on ceilling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M & L for preparing newly plastered surfaces of wall, priming with alkali-resistant priming paint and applying two coats of distemper oil emulsion, white or tinted over 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge.
M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
S & fixing as in repairs internal assembly syphonic /non syphonic type for PVC flushing cistern of cap 10 Ltr
S&F in repairs Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as directed ( Make : as per sample)
Treatment of sunken floor slab comprises of the following specifications and all as specified (i) M&L for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely. 40 mm avg thk pcc 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding conc to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed (ii) Rendering of uneven surfaces with 6 mm thick CM 1:4 mixed with and incl integral WPC @3% of weight of cement consumed fill it with water and check dampness and seepage where dampness and seepage noticed nozzles shall be fixed and grouting carried out. (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty" (iv) After drying putty wash the slab and sides of sunken portion with water and make it clean and clear (v) M&L for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall be 1 mm. When the second layer is still sticky , coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed. "(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20 mm thk cm 1:4 mixed with and including integral WPC 3 % of cement consumes as per manufacures specification including rounding of corners and junctions sloping towards spout Note:Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage seepage and to the entire satisfaction of GE . Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. the treatment shall be carried out by authorised applicators of chemicals. (vii) All pipes laid in sunken portion shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anticorrossive black japan paint. (viii) Height up to and including 14th floor."
M & L for dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M & L for non - skid coloured ceramic tiles 7 to 8mm thick and area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of the shade over and incl screed bed or bedding layer of 20mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M & L for coloured glazed ceramic tiles size 300x200x7mm on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match of the shade over and incl 10mm thick backing coat in C:M 1:4 complete all as specified and directed by Engr-in-Charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Enginner-in-Charge.
S & F in repairs aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to wooden doors / windows shutter with wooden beading (any size) and fixed to aluminium window / vent with aluminium wire staples complete all as specified and directed by Engr-in-Charge.
S & F in repair PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed by Engr-in-Charge.
M & L in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete ccomplete all as specified and directed by Engr-in-Charge.
S & F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge.
S & F 32 mm dia Waste fittings, brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge.
S & F in repair 32 mm dia Waste fittings coupling , brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge.
S & F LDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 32/40 mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.
S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S & F in repair Stop valves, 15mm dia cast copper alloy fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uninons and fixed complete all as specified and directed by Engr-in-Charge.
S & F in repair chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge.
S & F for in repair powder coated aluminium serrated finish 20/25mm dia curtain rod complete all as specified and directed by Engr-in-Charge.
S & F for in repair powder coated aluminium fancy types domes cum brackets suitable for 20/25mm dia curtain rod fixed with C/P screws & rovel plugs and fixed to both ends of the curtain rod etc complete all as specified and directed by Engr-in-Charge.
S&F in repair 125mm size hasp and staple safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.
S&F in repair 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge.
S & F in repair 75mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge
S&F in repair 125 mm extruded aluminium handles, fabricated type anodised fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs 100 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.
S&F in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S&F in repairs 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S&F in repairs MS 300mm ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed by Engr-in-Charge.
S&F in repairs 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.
S&F in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.
Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns, skirting, jamb/cill etc including removal of debries out of defence land complete all as specified and directed.
M&L machine cut granite (of any type) slab 18 to 20mm thick as in like kitchen plateform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 10 mm thick in CM 1:6 including grinding, polishing and making necessary hole for gas pipe and necessary bull nosing complete all as specified and directed.
M & L for machine cut Kota stone ( greenish colour, mirror polished) slab flooring 18 to 20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, over & incl 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed by Engr-in-Charge.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame complete all as specified and directed by Engr-in-Charge.
Taking down shutters of any description n exc 1 sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutters of any description exc 1sqm but n exc 2sqm each complete all as specified and directed by Engr-in-Charge.
S & F factory made shutter 30 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing glass/gauge etc of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed by Engr-in-Charge.
S & F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.
S & F 35 mm thick factory made flush shutters, solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed by Engr-in-Charge.
S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or aluminium wire staples and removing old beading, complete all as specified and directed by Engr-in-Charge.
S&F 3mm thick plain sheet glass ordinary quality and glazing fitted in wooden window n.exc 0.5 sqm in each pane incl wooden beading for securing glass complete all as specified and directed by Engr-in-Charge.
S & F 75mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge
S & F 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge.
S&F 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.
S&F 100 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.
S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S&F 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.
S&F MS 300mm ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed by Engr-in-Charge.
S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.
M&L for two coat synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete as specified and as directed by Engr-in-Charge.
M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed by EIC.
M&L applying one coat of oil bound distemper on old decorated surfaces of wall and filling the surface inperfections such as holes, dirt, fine cracks including preparation of surface complete all as specified.
M&L preparation of old decorated surfaces of wall including washing and applying one coat of Acrylic emulsion paint exterior grade (100% Acrylic) including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge.
M & L for applying two coats of water proofing coating system by applying shalicry - 215 of STP ltd/Rain coat 601 of Dr Fixit/Barrier coat of Araldite Ltd. over a coat of respective primer including prepariation of plaster surfaces or complete removal of existing treatment filling up of all cracks with approved crack fillers all as specified and directed
M&L cleaning the existing surfaces of chequered tiles/paver blocks with wire brush and keeping all dirt /dust away and applying one coats of floor guard paint
Removal of debries outside of MD land exc. 5 Km but n.exc.10km complete as specified and as directed by Engr-in-Charge. Note: Works shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.
satyanarayan conastruction (BID ID -3449953)
RUPESH CONSTRUCTION CO (BID ID -3450914)
SAHU AND SAHU CO. (BID ID -3456564)
JANKI ENTERPRISES (BID ID -3456570)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
NIT8559.pdf
Tender Documents • 1.06 MB
BOQ_819799.xls
BOQ • 4.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .