GE/CHM-88/2021-2022 REPAIR TO PARKING SHED, FIBRE SHEET, KERB STONE, FOOTPATH AND OTHER CONNECTED ITEMS UNDER AGE B/R I

Amount

Dismantling any type corrugated or semi corrugated sheets as in roof covering incl. ridges & removing from site complete all as specified and directed

Supply and fix Pre-painted galvalume aluminum zinc coating (AZ-70) GI based corrugated steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Material and labour for 2mm thick fibre glass reinforced translucent plain coloured sheeting with side lap, fixed with ‘L’ type or ‘J’ type or cranked hook, bolts, nuts, bituminous washer, self tapping screws as in roof, complete all as specified and directed.

Supply and fixing poly carbonate multiwall coloured sheets as approved, 8mm thick as in roofs with adequate size steel screws, washers, nuts, aluminium strip/ flat etc as per manufacturer’s instructions, complete all as specified and directed. Make of sheet shall be GE POLYCARBONATE/TUFF LIGHT.

Dismantling in fillets, rails, posts, raters, purlins etc under 40sqcm in section complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Supply and fixing for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge

Material and Labour two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.

Material and labour 15mm thick rendering cement plaster in Cement and Sand mortar 1:4 over brick or concrete surfaces finished fair and even without using extra cement including and taking down cement plaster upto 12 mtr height and providing necessary scaffolding , safety precautions and other requisite arrangements as per site requirement complete all as specified & directed.

Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

Material and labour 100mm thick providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed

Material and labour 75mm thick providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed

Supply and fixing, factory made glazed / polished chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, including dismantling of old tile and removal of debris complete all as specified and directed.

Material and labour PCC 1:2:4 type B-1 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges complete all as specified and directed.

Supply and fix concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 40 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, block complete all as specified and directed

Supply and fix concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, block complete all as specified and directed

Supply and fix concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade, and including laid over 25mm thick sand cushioning, block complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

Material and Labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

All as per serial item No 21 herein before but except bricks

Material and labour for precast kerb stone edging using factory made PCC blocks (M-20 concrete) of size 300mmx100mmx350mm, set and jointed in cement mortar 1:4 including necessary excavation and earth work, fixed as in repair complete all as specified and directed.

Material and labour for preparation of new decorated concrete surface exc 10 cm width or girth and applying two coats of synthetic enameled paint complete all as specified & directed.

Material and labour for preparation of old decorated concrete surface exc 10 cm width or girth and applying two coats of synthetic enameled paint complete all as specified & directed.

Material and labour for preparation of old decorated concrete surface exc 10 cm width or girth and applying two coats of exterior emulsion paint on kerb stone or where directed complete all as specified & directed.

Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

K.L. KATARIA AND SONS

VARUN TRADERS

Dhingra Brothers

Satyadev Builders