ADDITION / ALTERATION AND SPECIAL REPAIR TO P-16 (SAILORS MD ACCN) UNDER GE HADDO, PORT BLAIR

Amount

Demolition of PCC in roof surfaces including taking down existing treatment and in sunken floors or in simillar works etc of any description and in any position not otherwise specifically provided, etc complete all as specified and as directed

Demolition of reinforced cement concrete in any position and in any height not otherwise specifically provided, etc complete all as specified and as directed

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

M & L Cement concrete type B-1 1:2:4 (20mm graded stone aggregate) in roof padding concerte of average 50 mm thick with water proofing compound as per manufacturers instructions etc complete all as specified and as directed. (WPC will be measured & paid separately under relevant Item)

M & L for Rendering 10mm thick in cm 1:3 mixed with water proofing compound as per manufacturers instructions on concrete surfaces when PCC on roof surfaces is still green including finished even and smooth etc for easy laying of APP membrane on roof, complete all as specified and as directed. (WPC will be measured & paid separately under relevant Item).

M & L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) average 25 mm thick in bottom portion of sunken floor portion with or without water proofing compond as per manufacturers instructions, finished even and fair etc. complete all as specified and as directed. (WPC will be measured & paid separately under relevant Item)

M & L for Rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces mixed with water proofing compound as per manufacturers instructions finished even and smooth in sunken portion without using extra cement etc complete all as specified and as directed. (WPC will be measured & paid separately under relevant Item)

M & L for PCC 1:5:10 type E2 using 40mm graded stone aggregate in filling and mass concrete etc complete all as specified and as directed.

M & L for 40 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed

M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying sandwich tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm including removal of existing water proofing treamant on sunken slabs, edges and vertical surfaces complete all as specified and as directed.

M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over APP membrane surface complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.

All as per item No 17 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

M&L 18 to 20mm thick granite stone (of any type ) work (table rubbed and polished) in cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

M&L for Rounding to edges of stone slabs / Granites one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble / granite stone etc complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each complete all as specified and as directed.

S&F 2nd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints etc complete all as specified and directed.

S&F flush shutter 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood glazed and skeleton shutter divided into squares, with plain, chamfered or rounded, mitred without sash bars prepared to receive glass, gauze, etc. edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a) complete all as specified and as directed.

Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

S&F in repairs for Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or using aluminium beads to existing aluminium windows etc all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed

S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing etc all as specified and as directed

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and as directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long.complete all as specified and as directed.

S&F Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed.

S&F Mild steel 300mm, long ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed.

S&F 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F second class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and as directed.

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed.

M & L cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in Hold fast, steps, bed plates, kerb, coping & in simillar works including necessary formwork etc complete all as specified and as directed.

M & L in repair Second class hard-wood in scantlings, clean sawn, fixed to existing chowkats or to walls, etc complete all as specified and as directed

M&L for 18-19mm thick Prelaminated particle Board as in cub boards, cabinet, shelves etc with decorative choice lamination on one side & other side balancing white lamination, fixed with screws to frames of any description etc all as specified and as directed.

S&F Auto concealed Cabinet Hinges, full overlay of size 103mm x 64mm etc all as specified and as directed.

S&F Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc all as specified and as dierected.

S&F Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as dierected.

S&F extruded aluminium alloy handles fabricated types, anodised, each 100mm long.complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt all as above but 75mm long complete all as specified.

S&F extruded aluminium anodised 75mm long hasp and staple, safety type incl bolt to hinge plate and fixed with screws complete all as specified.

S&F 2nd class HW plain fillets rectangular or triangular section wrought fixed screws exc 13 sqcm and n.exc 25 sqcm complete all as specified and as directed.

M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparing old wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or floors etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified and directed.

S&F for 110mm dia PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or in floors etc using synthetic rubber adhesive cement solvent complete all as specified and directed.

S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia.complete all as specified and as directed.

S&F PVC (SWR) vent cowl, 75mm dia.complete all as specified and as directed.

M&L PVC (SWR) floor trap 100mm with grating including jointing with solvent cement complete all as specified.

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.

M&L for High density polyethylene (HDPE) pipes of 50mm, pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repairs vitreous china counter wash hand basin flat back of size 550x 400 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, waste pipe and all necessary inlet, out let connections complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts etc complete all as specified and directed.

S&F in repairs 15mm dia bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs 15mm dia Swan neck Bib taps with flange cast copper alloy chromium plated fancy type suitable for kitchen sink or similar screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed Make: Cat No:1698 of Prayag or Equivalent approved.

S&F in repairs 15mm dia Two way bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F Health faucet (ABS Body) Fancy type mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs for Brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or brass ferrule etc complete all as specified and as directed.

S&F in repairs 15mm dia CP Angle cock with flange fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs concealed stop cock cast copper alloy regular body 15mm (male thread) fancy type screwed down high pressure with capstan head handle, screwed both ends for iron pipe or for union with long shank and cup etc complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc complete all as specified.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange etc complete all as specified.

S&F in repairs Brass chromium plated tubular towel Ring fixed with screws etc complete all as specified.

S&F in repairs PVC connection 15 mm dia and 450 mm long with both and nuts complete all as specified and as directed.

S&F in repairs 1mm thick Stainless steel sink with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified.

S& F in repairs, 25 mm dia Stainless steel curtain rods with fancy type curtain brackets, stops, rollers as per the site requirements etc complete all as specified and directed.

S&F in repairs for plate rack of stainless steel of (Approximte size 750mm x 600mm x 250mm) with steel sleeves & hanging arrengement for utensile, complete all as specified and directed (Make : Prayag Cat No. P-440) or equivalent as approved.

S&F for 300mm size Acrylic Corner shelf (soap stand) with guard suitable for bathroom / kitchen and fixed to wall complete all as specified and directed.

S&F for 300mm x 125mm Acrylic shelf (soap stand) with tumbler suitable for wash basins and fixed to wall complete all as specified and directed.

Taking up or down 15mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying and laying of 20 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

S&F in repairs for providing 20mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends suitable for CPVC pipes etc complete all as specified and as directed.

Cutting chases in PCC block or Brick or stone walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.

Disconnecting existing tanks setting aside and hoisting of PVC water tank of capacity exc 500 & n exc 1000 ltrs including cleaning and removing all scale & dirt, etc from tanks, required reconnecting and re- fixing in position all scale and dirt etc from tanks and writting date of cleaning and due date of cleaning, etc complete all as specified and as directed

S&F Rotational moulded Polyethylene [HDPE] Water Tanks, Double Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.

M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as directed.

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.

Providing precast cement concrete solid building blocks or slabs Type B1 1:2:4 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in CM (1:4), complete, in walls complete all as specified and as directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.

M&L for rendering 15 mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces of walls at any height with neccesary scafoldings, finished even smooth without using extra cement etc complete all as specified and as directed.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

M&L for 5mm thick plaster in CM (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth (without using extra cement) all as specified.

Taking down of damaged, loosened cement concrete/cement mortar at any height with necessary scafoldings in RCC walls/soffits of slabs, Columns, beams etc and similar structure members up to depth of 20mm to 40mm cleaning the dismantled portion with wire brush etc remove dust , dirt and other foreign particles etc and washing with water with pressure and applying bonding agent on old concrete surfaces all as per manufacturers instruction, Over prepared surfaces provide 20 mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/s FOSROC chemical (India) Pvt Ltd or Equivalent product of manufacturer all as per manufacturers instruction including two coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and applying with 3mm average thick wall care putty and applying two coats of oil bound distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying one coat of white wash including filling of cracks, holes etc. with cement putty complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level, etc complete all as specified and as directed..

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed by Engineer-in-Charge.

M&L for sand filling under floors or in foundation including watering and consolidation incl spreading and levelling complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block glossy finish on top portion of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down fuse Unit/DBs 415 Volt/230 Volt.complete all as specified and as directed.

Taking down old aluminium sub main wiring of any size.complete all as specified and as directed.

Taking down existing light fittngs any type and any capacity.complete all as specified and as directed.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/ sockets/ regulators etc. complete as specified for :- Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.

Description same as per Srl item No 120 above but One light/fan point controlled by one switch 5 Amps one way.

Description same as per Srl item No 120 above but, One light point controlled by two 2-way switches.

Description same as per Srl item No 120 above but, point wiring for 5 pin switch socket outlet , 6 Amps on independent board

Description same as per Srl item No 120 above but, point wiring for 5 pin switch socket outlet , 6 Amps on same board

Description same as per Srl item No 120 above but,One bell point controlled by one bell push switch 5 Amps one way.

M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing & capping of suitable size not less than 25mm width with accessories on surface of walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and covered with 3mm thick plastic laminated sheet top cover for socket outlet etc, all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps switch on independent board.

S & F Switch piano, flush type, single pole one way 5 amps all as directed. Make: Anchor/Cona/Legrand

S & F Switch piano, flush type, single pole one way 15 amps all as directed. Make: Anchor/Cona/Legrand

S & F socket outlet 2 in 1, 3 pin 5 amp, flush type, universal all as directed. Make: Anchor/Cona/Legrand.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15, flush type, universal all as directed. Make: Anchor/Cona/Legrand.

S & F bell push switch, flush type, single pole, 5 Amps, 240 volts AC all as directed. Make: Anchor/Cona/Legrand.

S & F Switch piano, flush type, single pole two way 5 amps all as directed. Make: Anchor/Cona/Legrand

Supplying & fixing for ceiling rose, 3 phase, PVC polycarbonate, isolated body complete all as specified and directed.

S&F Electric Bell, Ding dong type working on 230 volts AC supply all as directed. Make: Anchor/Cona/Legrand.

Taking down old corroded GI bracket of 25 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light all as specified and directed

S& F 30 watts LED building security light fittings win peanuts leans IR 65 luminaire comprise of elegantly designed COB LED ensure efficient optics and uniform distribution of light for street light application. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessaryt fixing arrangements as per site requirements class complete all as per specified and directed. Make : Luker Cart Part No: LSTE-30 or equivalent to Philips /Havells / CG

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories complete all as per specified and directed. Make: CG Model No : ENERGION Riviera with out remote 32 watt or equvalent make of Havells/Orient / Usha /Bajaj.

Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel painting, replacement of worn out spares and reassembling the geyser and re-fixing in its position all as directed. NOTE : Spares shall be measured and paid separately under relevant items as supply only.

Supply only heating element 1500 watt.complete all as specified and as directed.

Supply only thermostat switch complete all as specified and as directed.

Supply only pressure release valve complete all as specified and as directed.

Supply only thermal cut out complete all as specified and as directed.

Supply only indicator lamp red colour.complete all as specified and as directed.

Supply only indicator lamp green colour.complete all as specified and as directed.

S & F connecting pipe complete all as specified and as directed.

Taking down carefully ceiling fan of any make, size from its location, handed over to AGE E/M store yard without any damage complete all as specified and directed.

Taking down carefully exhaust fan of any make, size from its location, handed over to AGE E/M store yard without any damage complete all as per specified and directed.

S & F high speed air ventilating fan 300 mm sweep single ph, 230 volt, steel body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHVDSREPSG12 Ventil Air DS (HS) R or CG, Model No: 300 mm TRANSAIR or equivalent to Orient / Usha/ Khaitan

S & F air ventilating fan 200 mm sweep single ph, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHVVEDXOWH08 Ventil Air DX or CG, Model No: BRISK AIR NEO or equivalent to Orient / Usha/ Khaitan

Supplying, fixing and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT5M20 or equivalent to CG/ Philips / Havells/Luker

Supply and fixing and testing Tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT510P or equivalent to CG/ Philips / Havells/Luker

S & F Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base. Make - Havells model No LHFOAJE1TN1I060 or equivalent to Philips, LUKER.

S & F and testing surfce mounting LED light fittings 12 watts including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed Make : LUKER model No-LNPSPR12 or euivalent to CG/ Havells.

Taking down carefully existing electronic energy meter of any capacity and any size and refixing the same location after completion of B/R work complete all as per specified and directed.

S & F of FRP meter box of size (inside) 250 x 250 x 160 mm including taking down the old/unserviceable meter boxes all as specified and directed. Make : SINTEX Cat No. GSMB-2525 or equivalent to Hensel

S & F Sub main wiring with PVC insulated FRLS cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC Casing & Capping (ISI marked) incl all specials/accessories etc and provision of PVC insulated FRLS copper conductor single core 6.0 sq mm for earth continuity all as directed. Note : 3 length of cable and one length casing caping shall be measured and paid for one length Make:Gloster /Havells /Anchor /Polycab /Finolex

S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed. Make : C &S/ Indo Asian /Havells/L&T

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : C&S/ Indo Asian /Havells /L&T

Supply and Fixing 4 pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed Make :C&S/ Indo Asian /Havells/L&T

Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian/Havells/L&T / C&S

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. Make : Indo Asian/Havells/L&T/C&S. Note of 154 & 155 :- All copper conductors should be connected with MCB alongwith copper reducer terminals of suitable size duly crimbled.

Supply, laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 35 Sqmm 4 core (laid on floor/Roof/wall in proper saddling all as specified and directed. Make Polycab/ Gloster/ Anchor/ Havells/ Finolex

Supply and laying/fixing in trenches, cable ducts ,clamping on wall or any place DWC HDPE pipe of size 50 mm(OD) x 38mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed. Make:Rex Poly Extrusion Ltd/Tirupati Plastomatics Pvt Ltd.

M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia GI medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

JD Construction

M/s K Moorthi

Reliance Sales Agency

M/s Ramesh Lal

P Babu

M/s Kamal Electrical

MAJUMDAR FURNITURE