Improvement work for control room and Bath room flooring Cable trench and entrance wing wall at Keelaperambalur 33 11 KV SS

Amount

Dismantling the existing Brick masonry, and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work .

Dismantling the existing PCC and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work

Dismantling the existing RR masonry, and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work .

Chipping the existing plastering, and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, etc., complete and as directed by the Engineer incharge of the work.

Earth work excavation for all type of soils and depositing on bank with initial lead of 10m and initial lift of 2m for foundations, grade beam, septick tank and water sump etc., including cost of all materials, lead, lift, T&Ps, etc., complete and as directed by the Engineer incharge of the work.

Supplying and filling the basement and foundation with M.sand watering and consolidation etc., including cost of materials, labour, lead, lift, T&P etc., and as directed by the Engineer incharge of the work.

PCC 1:3:6 using 40mm HB stone for foundation, flooring, etc., in the following levels as instructed by the Engineer in charge including cost of all materials, labour, lead lift, T&P, etc., complete.

Brick works in Cement mortar 1 : 5 using Country bricks size 8 1/4" x 4 1/4" x 2 1/4" including cost of all materials, labour lead, lift, etc., complete and as directed by the Engineer incharge of the work.

RCC M20 using 12-20mm HBG stone using minimum cement content of 360 KG for Grade beam and Plinth beam with form work for foundation including cost of all materials labour ,lead, lift etc complete and as directed by the Engineer incharge but excluding cost of steel reinforcement

RCC M20 using 12-20mm HBG stone using minimum cement content of 360 KG for Flooring with form work for foundation including cost of all materials labour ,lead, lift, T&Ps etc complete and as directed by the Engineer incharge. but excluding cost of steel reinforcement

Providing steel reinforcement for RCC works including cost of steel, binding wire and labour for cutting, bending, tying and placing in position, lead lift, T&Ps, etc., complete and as directed by the Engineer incharge of the work.

Supplying and fixing in position GI angle 50x50x6mm and channel of required length for fixing the cable duct, as per the direction of site Engineer including cost of all materials, lead, lifts, and cutting the GI angle required length and labour for fixing etc, complete.

Plastering with C.M 1:5 12mm thick including cost of cement all materials labour, lead, lift, curing, T&Ps etc., complete and as directed by the Engineer incharge of the work.

White washing Two coats with white cement including cost of all materials, labour, lead, lift etc complete and as directed by the Engineer incharge of the work.

Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat including cost of all materials, labour, lead, lift, T&Ps, etc., complete and as directed by the Engineer incharge of the work.

Painting the outside wall with two coats of best quality emulsion of approved colour over a exterior primer coat including cost of all materials, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Flooring with approved ceramic of non slippery type tiles over cement mortar 1:3, 12mm thick including pointing with white cement finishing the joints, flush pointing the surface cost of all materials labour lead, lift, T&Ps, etc., complete and as directed by the Engineer incharge of the work.

Supplying and fixing of joint free Stain Free Nano Polish Vitrified Tiles of size 600mm x 600mm x 8mm in CM 1:3 of approved quality and colour including cost of all materials, labour, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Supplying and fixing white ORIYA TYPE water closet with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying and fixing of PVC pipe of 110 mm dia, 6 kg / cm2 with necessary materials, specials, labour, leads, lift, T&Ps etc complete and as directed by the Engineer incharge of the work.

YAMINEE ELECTRICAL PROJECTS PRIVATE LIMITED (BID ID -1091482)