CERTAIN REPAIR TO ROAD AND OTHER MISC WORK FOR CABS STIR CEMILAC GTRE BANGALORE

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm exc 50 mm deep and n exc 100 mm deep complete all as directed.

M&L for preparing un-surfaced water bound macadam surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L for applying evenly a priming/tack coat with bituminous primer @ 10 Kg per 10 Sqm, using paving bitumen complete all as specified and as directed

M&L for Premix bituminous, macadamwith paving bitumen of any penetration with binder content 4% by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less rolled and consolidated with 8 to 12 tone power roller, complete all as specified and as directed

Repairs to potholes not exceeding 1sqm each including sweeping,free from dust and mud, or water, scoring sunken surfaces in roards,paths, etc cutting around edges to at 25mm in depth, making good by applying tack coat @ 5kg/xsqm ,putting in premixed bituminous macadam,well rammed and sealed with binder 9.80kgs per 10 sqm,blinded with 0.09cum of stone chipings,6.3mm size and again wel ramming (including supply of premixed macadam, binder and chippings) depth of pot hole exceeding 30mm etc complete all as specified and as directed

M&L Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 05 kg per 10 sq metre complete all as specified and directed.

M & L Bituminous premix asphaltic semi-dense concrete 25 mm consolidated thickness with 5.5% binder content of paving bitumen any penetration by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed by Engr-in-Charge.

M&L Retro-Reflective Thermoplastic Road marking paint cofirming to MoRTH 803.4.2.1 3 specifications Colour WHITE/YELLOW all as directed by E-in-C Make : Auto mate/STP/Eqvl

Demolition of brick work, for drain,brick work ,concrete or stone boulder masonry built in cement mortar complete .

Material and labour for providing Pre-cast cement concrete block masonry 1:3:6, type C 1 with solid blocks, exceeding 10 cm in width and setting in mortar, set in cement mortar 1:4 complete all as specified and as directed.

M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed

M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 but except Stone all as specified but except stone complete all as specified and as directed

Taking down plastering on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L rendering 15 mm thick stone masonry wall surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L applying 2 coats of Exterior emulsion weather proof paint over a coat of primer on new plaster wall surfaces including prepration of new plaster and all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard)(ht Upto 20 Mtr including all necessary scaffolding)

M&L rendering 10 mm thick Cm 1:4 on fair faces of brick masonry or concrete surface of wall including finishing even and smooth without using extra cement complete all as specified and as directed.

M&L prepration of new surface on wall and applying two coats of distemper oil emulsion complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for plain cement concrete 1:2:4, type B1, average thickness 40-70 mm thick (using 20 mm graded stone aggregate) as in flooring/ paving finished rough to receive cement tiles complete all as specified and as directed.

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed (MAKE:HR JOHNSON/KAJARIA/SOMANY)

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed (MAKE:HR JOHNSON/KAJARIA/SOMANY)

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including snap grid of any type and cover fillets complete all as specified and directed

Supply and fixing of Armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable ofr green building application with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

Removing demolition material debris outside MD land distance exc.5 Km n.exc 10 Km on the starting point

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 sqm but n exc 4.00 Sqm each complete all as directed .

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm complete all as specified and as directed

S&F Anodised aluminium powder coated frame for doors window, partition and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified

S&F Anodised aluminium powder coated window and ventilators shutters,aluminium section sliding or fix type weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in n. exc 1.5 Sqm in each pan with rubber beading as in doors and partion complete all as specified and as directed.

S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work as in aluminium door and partion complete all as specified and as directed.

S & F sheet glass thick ordinary quality in n exc 1.5 Sqm in each pan 4 mm thick with rubber beading as in window complete all as specified and as directed.

Dismantling Interlocking Paver as specified and directed.

Supply and fix machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment complete all as specified and as directed

Material and Labour for sand filling under floor including watering, consolidation, and well ramming complete all as specified and as directed.

Moulya Builders

Maruthi constructions

S CHANDRASHEKAR (SREE BUILDERS)

Vinayaka Enterprises

Sreyas Enterprises

S R CONSTRUCTIONS

Meghana and Gowda Enterprises