Day to day repairs to block no CD-1, C-3 and D-2 at Jail road TE Ratnagiri

Amount

Distempering with 1st quality acryelic distemper (ready mixed) having VOC content less than 50 Gm per liter of approved manufacture and required shade and colour all complete to achieve approved shade and colour

a) New work (two or more coats) over and including water thinable priming coat with with cement primer having VOC content less than 50 Gram/Liter

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete staircase portion BC-I and BC-II

Providing and fixing mirror of superior glass (of approved Quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard bord backing

a) Rectangular shape 453x357 mm dia.

Providing and fixing PVC low level flushing cistern with manually controlled device ( handle lever ) conforming to IS 7231 Parryware/Hindware /Seabird/Orient (coral ) with all fittings and fixtures complete

a) 10 litre capacity - white

Providing and fixing IS-12817 marked stainless steel butt hinges with necessary screws etc. complete.

a)100x58x1.90 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

a)20 mm nominal outer dia. pipes.

b) 25 mm nominal outer dia. pipes.

c)32 mm nominal outer dia. pipes.

d)40 mm nominal outer dia. pipes.

Taking out door, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

a) Of area 3 sq. metres and below

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

a) Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)

a)Kiln seasoned and chemically treated hollock wood

i) 30 mm thick shutters

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

b) 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.

Providing and fixing aluminium sliding door bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete

a) Twin rubber stopper

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.

a) 30 mm thick plain PVC door shutters.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS: 13592 Type - A including jointing with seal ring conforming to IS: 5382 leaving gap for thermal expansion.

a) Single socketed pipe.

i) 75 mm diameter

ii) 110mm diametre.

15mm cement plaster on the rough side of single or half brick wall of mix :

a) 1:6 (1 cement: 6 coarse sand)

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 Sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface disposal of rubbish to the dumping ground within 50 of the walls complete including metres lead :

a) with cement mortar 1:4 ( 1 cement : 4 fine sand )

Providing and fixing brass gate valve with C.I. wheel of approved quality ( screwedend )

a) 25mm nominal bore

b) 40 mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

a) 15 mm nominal bore with 45cm length

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete

a) Flexible pipe

i) 32 mm dia

Providing and fixing PTMT bib cock of approved quality and colour

a) 15 mm nominal bore, 122 mm long. Weighing not less than 99 gms.

Providing and fixing PTMT stop cock of approved quality and colour

a) 15 mm nominal bore, 86mm long. Weighing not less than 88 gms

Providing and fixing PTMT pillar cock of approved quality and colour

a) 15mm nominal bore, 107mm long. Weighing not less than 110 gms

Removing of shrubs/bushes from walls/sanitary pipes/water supply pipes of buildings at any height including removing roots embedded in building members by suitable tools etc. and applying HCL Acid and filling the hole by cement mortar 1:4 etc. complete as per the direction of Engineer-in-charge. (Note : The rate includes the cost of all the materials , labours, equipments, tools required for the work & nothing extra will be piad for any account.)

Cleaning of chocked drainage lines in bathroom and water closet from inside of toilet including removal of all type of blockage and disposal of same, all as per the direction of Engineer-in-charge.

(a) From kitchen and bathroom.

(b) From Water Closet (WC).

Cleaning of chocked drainage lines in kitchen, bathroom and water closet from outside with the help of Jhoola/ ladder etc. by opening of C.I./ PVC plug of waste pipe line and clearing all type of blockage by rodding or other suitable tools and disposal of same, all as per direction of Engineer-in-charge.

(a) From bathroom.

Providing and fixing Aluminium mosquito proof jali 0.35 mm thick (approx.) including removing the existing Aluminium Jali & fixing the Aluminium jali with 2nd class teak wood beading 25 x 12 mm. with nails and screws etc. complete. as per direction of Engineer in Charge.

Cleaning of manholes by rodding, scrubbing and flushing to remove the clogged drain of sludge, waste & rubbish material and disposal of waste/ refuge/ filth etc. (recovered in this process) to a place permitted and approved by the Local Municipal corporation all as per the direction of Engineer-in-Charge.

Cleaning of sewer line by rodding, scrubbing and flushing to remove the clogged drain of sludge, waste & rubbish material and disposal of waste/ refuge/ filth etc. (recovered in this process) to a place permitted and approved by the Local Municipal corporation all as per the direction of Engineer-in-Charge. Sewer pipe line of dia. Upto 300mm.

Providing and fixing brass Patti valve / quarter turn of approved quality

a) 40 mm nominal bore

b) 25 mm nominal bore

Providing and fixing CPVC Union in CPVC pipe including cutting the pipe and fixing with cement solvent etc. complete. (New work)

a) 40 mm nominal bore.

b) 25 mm nominal bore.

Easing of doors and windows shutters etc. from stiffened state including including replacement of broken glass panel sawing of the edges, oiling/ greasing/ tightening of hinges, correcting alignment and other minor repairs without requirement of additional materials other than nails, screws etc. for its smooth and proper functioning complete, all as directed by the Engineer-in-Charge.

a) Wooden door shutters of size up to 1.00 x 2.10m at all floors.

Supplying Cement Concrete frames of required size made up of Cememt Concrete grade M40 & above at the site of work including all leads & lifts involved in the job as per the direction of the Engineer in charge.

Providing and applying Two coats of “Dr. Fixit Raincoat” or equivalent over one coat of primer of “Dr. Fixit Primeseal" or equivalent on external wall surface (prone to leakage due to heavy rain) etc. all complete as per manufacturers specifications in following sequence of operations. a. All new cement-sand renderings /concrete surfaces should be allowed to age 6 to 8 weeks before surface b. Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. by mechanical means such as wire brushing & shot blasting . c. Finally vacuum cleaning of all loose solids and liquids can be done, if required. d. All surface cracks upto 5 mm width and above should be filled separately (to be paid under different item), e. Prime the surface with Dr. Fixit Primeseal diluted with potable water by volume in 2:1 ratio (2 parts primer and 1 part water) and allow it to dry for 2 to 3 hours f. Use Raincoat directly from the container (Stir contents well before use), Apply two neat coats of Raincoat without dilution by brush or roller at a time interval of 5-6 hours on rain lashing walls, chajjas and parapet walls. g. Allow the coated surface to air cure fully for 7 days.

Cleaning of terrace by brooming, removing leaves any other material lying on terrace and disposal of material et complete as per as directed by the Engineer-in-charge.

Providing and fixing PVC SWR pipes with rubber ring including cutting at all floors etc. complete and as directed by the Engineer-in-charge.

Providing and fixing PVC SWR fittings to PVC SWR pipes with rubber ring at all floors etc. complete and as directed by the Engineer-in-charge.

a) SWR bend with access door - 87.5 degree.

b) PVC pipe clips