Himachal

Financial Eval

Works

Civil Works

Balanace work of R/M of Rest House building at HPPWD Sub Division at Kandaghat

Public Works Department

Solan, Himachal Pradesh

Amount: ₹4.9 LCloses: 19 Aug 2026Closed

Timeline

Published13 Aug 2026
Closed19 Aug 2026
Technical Evaluation3 Sept 2026
Financial Evaluation9 Sept 2026
Award—

Bids

Percentage

2 Bids9 Sept 2026

#	Company	Amount	Rank	Status
1	Munish Jain L1₹4.9 LAccepted-Finance H NO 26 HB COLONY SHIMLA DISTT SHIMLA 1 \| SHIMLA \| HIMACHAL PRADESH \| 171001	₹4.9 L	L1	Accepted-Finance L1
2	EZAZ ANJUM ANSARI L2₹5.0 L+₹9,704.25 (1.98%)Rejected-Finance	₹5.0 L+₹9,704.25 (1.98%)	L2	Rejected-Finance L2

Tender Value

₹4.9 L

EMD Value

₹9,700

Closing Date

19 Aug 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer HPPWD Solan

Address

near new bus stand

Work Description

C/o new toilet block in rest house premises, Providing water supply and sanitary works, cup boards and painting of interior and exterior portion etc

Tender Information

Tender ID

2026_PWD_141171_6

Reference Number

No. 6147-54 dated 11.08.2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

60 days

Location

Solan

Source Website

Subscribe to view

Eligibility / Pre-Qualification

as per SBD

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

Required1. Cost of tender and earnest money indicate in Schedule F General Rule NO. 24.1 (.pdf)

Required2. Contractors registration refers general rules and directions No 24.3 of SBD. (.pdf)

Required3. GST registration refers general rules and Directions no 24.4 of SBD. (.pdf)

Required5. List of machinery, tool plant shown in schedule F with reference to clause 24.6 of SBD affidavit (.pdf)

Required6. Affidavits of correctness of all the documents are submitted is true by the Contractor. (.pdf)

Required7. Others documents as per SBD. (.pdf)

Required9. Contractor should have to submit the proof of EPF as mentioned in SBD Clause 22 A. (.pdf)

Required12. Contractor should submit mobile number and Email address (.pdf)

Required13. Fill Form NO 8 of SBD as per Directions and Rules No 24.8 and upload PDF documents. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹9,700

Important Dates

Last Activity

9 Sept 2026

Published

13 Aug 2026

Bid Opening

19 Aug 2026

Download Starts

13 Aug 2026

Download Ends

19 Aug 2026

Submission Starts

13 Aug 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (47 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.	0.84	Per Cubic Meter	5,528.25	₹4,643.73
2	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Cement mortar 1:4 (1 cement :4 coarse sand in superstructure above plinth level up to floor level. superstructure above plinth level to up to all floor level,including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.	17	Per square meter.	747.65	₹12,710.05
3	Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position in Sal wood wood as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.	-	Per Cubic Meter	95,763.05	-
4	Providing and fixing 35 mm thick including ISI marked marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.	1.8	Per Square meter	2,832.75	₹5,098.95
5	Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts, including all incidental charges.	24.15	Per Square Meter	1,350	₹32,602.5
6	Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts, including all incidental charges.	71.74	Per Square Meter	1,425	₹1,02,229.5
7	Providing and fixing 6 mm (six millimeter) thick water proof ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately)as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.	43.95	Per Square Meter	600	₹26,370
8	Providing and fixing anodized aluminum Sliding Door Bolts 30016 (Three hundred Sixteen) millimeters size anodized transparent or dyed to required shade and color with screws etc. Complete as per direction of Engineer in Charge as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.	1	Each	239.6	₹239.6
9	Providing and fixing aluminium 200*10 (Two hundred into Ten millimeters) tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.	-	Each	99.2	-
9.1	150*10 (One hundred fifty into Ten millimeters)	-	Each	72.2	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.22 MB

Work Item Documents

BOQ_209541.xls

BOQ • 0.48 MB

SBD.pdf

Tender Documents • 3.17 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Munish Jain

L1₹4.9 LAccepted-Finance

H NO 26 HB COLONY SHIMLA DISTT SHIMLA 1 | SHIMLA | HIMACHAL PRADESH | 171001

EZAZ ANJUM ANSARI

L2₹5.0 L+₹9,704.25 (1.98%)Rejected-Finance

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

0.84

Per Cubic Meter

5,528.25

₹4,643.73

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Cement mortar 1:4 (1 cement :4 coarse sand in superstructure above plinth level up to floor level. superstructure above plinth level to up to all floor level,including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

Per square meter.

747.65

₹12,710.05

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position in Sal wood wood as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Per Cubic Meter

95,763.05

Providing and fixing 35 mm thick including ISI marked marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

1.8

Per Square meter

2,832.75

₹5,098.95

Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts, including all incidental charges.

24.15

Per Square Meter

1,350

₹32,602.5

Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts, including all incidental charges.

71.74

Per Square Meter

1,425

₹1,02,229.5

Providing and fixing 6 mm (six millimeter) thick water proof ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately)as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

43.95

Per Square Meter

600

₹26,370

Providing and fixing anodized aluminum Sliding Door Bolts 300*16 (Three hundred* Sixteen) millimeters size anodized transparent or dyed to required shade and color with screws etc. Complete as per direction of Engineer in Charge as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Each

239.6

₹239.6

Providing and fixing aluminium 200*10 (Two hundred into Ten millimeters) tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Each

99.2

9.1

150*10 (One hundred fifty into Ten millimeters)

Each

72.2