Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹23.2 L+₹87,365 (3.90%)Rejected-AOC | L2 | Rejected-AOC Not Lowest | |
| 3 | L3₹23.4 L+₹1.1 L (4.75%)Rejected-AOC BLOCK NO 306 A SAI NIVAS CHOUDHARY CHOWK JARIPATKA NAGPUR 440014 | NAGPUR | NAGPUR | MAHARASHTRA | 440014 | L3 | Rejected-AOC Not Lowest |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAGPUR
Commander Works Engineers Bldg No. P-9, Sitabuldi Fort, Nagpur-440 001 Pin-900419, C/o 56 APO
REPAIR TO CERTAIN INTERNAL ROAD OF VARIOUS UNITS AT NAGPUR UNDER AGE B/R-II OF GE KAMPTEE
2022_MES_530817_4
84740/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
GE KAMPTEE
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE KAMPTEE
₹40,000
Yes
19 Dec 2022
14 Nov 2022
6 Dec 2022
14 Nov 2022
5 Dec 2022
21 Nov 2022
14 Nov 2022 - 17 Nov 2022
Amount
Repair to potholes any depth, n. exc. 1 sqm each including sweeping with mechanical equipment and making the surface free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. by using pressure air, cutting around edges to atleast 25 mm in depth making good by applying tack coat at 5 kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc. 30 mm using paving bitumen, complete all as specified and as directed.
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with mechanical equipment, to remove all loose dirt etc. complete and applying evenly a priming/tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen grade VG-10 using mechanical sprayer and providing premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix and 2 % cement filler, rolled and compacted to required camber and gradient , using 8 to 10 tonne power roller complete all as specified ans directed. Note: The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.
Material and Labour Applying evenly a priming/tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen grade VG-10 on blacktop surface using mechanical sprayer, complete all as specified and directed.
Material and labour for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix and rolled & compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed. Note: The work shall be executed by using hot mix plant & mechanical paver.
Material and labour for Preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 800.4 of MORTH specification including spraying of glass beads etc. all as per manufacture instructions and as specified and directed.
Material and labour for 60 mm thick, M-35 grade, machine pressed precast concrete coloured interlocking paver block (rubberised finish) of any shape and size confirming to IS 15658-2006 laid over, with and including 30mm thick sand cushion or bedding layer, with grey cement and pigment complete all as specified and as directed.
Material and labour for chequered cement concrete tiles glossy finish 30 cm x 30 cm x 25mm thick set, laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 jointed and pointed in neat cement slurry of 3kg/ Sqm as in floor, with grey cement and no pigment complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for including disposal off demolished material and rubbish out of the premises to a distance upto 5.0 KM, complete all as specified and as directed
Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded granite stone aggregates) as in sub bases of pavings, complete all as specified and as directed.
Material and labour for cement concrete 1 : 2 : 4 Type B-1 (using 20mm graded stone aggregate) as in plinth courses, copings, kneelers, bed plates, and similar articles including necessary form work, complete all as specified and as directed.
Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
Material and labour for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
Supply and fixing solar studs size 125 x 125 x 20 mm aluminium alloy and polycarbonate stud, (Red/ Yellow LED's) 3 + 3 LED's with shank in tough aluminium diecast body with stem, complete as per MORTH/ IRC specifications and manufacture's instruction, complete all as specified and and directed.
NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.600.00 /- ]
M/s SHREE SAIBABA CONSTRUCTION
Manoj Jethani
Bidder Name
Manoj Jethani
M/s SHREE SAIBABA CONSTRUCTION
M/s KAMAL R AGRAWAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .