REPAIR/MAINT OF DG SETS, VEHICLES AND OTHER MISC WORKS AT MIL STATION UNDER GE NAMS

Amount

M&L for maintenance of DG Set 250 KVA DG set and carrying out 'B' check and replacement/servicing of 'B' check kit filters such as oil filter, by pass filter, fuel filter, CR element and CR plates complete with 'O' rings and draining of Engine oil and topping up with the new engine oil complete testing all as specified and directed by Engr-in-Charge for the following capacity DG Sets : - Note : (i) Necessary tool for replacement of spares for 'B' check shall be deemed to be inclusive in the rate quoted by the contractor. (ii) Spares such as replacement of u/s items incl engine oil, air filter, fuel filter & mobil filter,or any parts of DG sets will be measured & paid separately under respective item as supply only. (iii) Contractor should visit the site before quoting the tender to know the working condition of the station. All requisite safety measurers are to be adopted by contractor on site. (iv) Minor repair work whereever supply only items by contractor for DG sets is to be carried out by DG Set technician. (v). The contractor will be responsible for cleaning/grass cutting/ vegetation cutting upto two meter surrounding of DG Sets. (vi) Necessary welding work required /replacement of door hings etc any other parts shall be deemed to be inclusive in the rate quoted by the contractor. (vii) Supply & fixing & testing after repair items should be executed thorugh authorized rep of manufacturer only and fixing charges to be inclusive in the rate quoted by the contractor mentioed in below respective capacity of DG sets.

Supply only following spare parts as mentioned at Sl No. 1.00 above for 250 KVA DG set above:-

Spinion Lub Oil filter

Fuel Filter kit 1.1 ltr

Centrifugal filter service kit

Safety Air filter element

Oil seal (150x120x13.5)

Oil supply pipe sub assembly (with flex men)

V Belt AVX13X1562L

By pass Hose

Water supply Sub Assembly

V Belt AVX13X1015L

Centrifugal filter service kit

Vent pipe sub assembly

Leak off Pipe Assembly

Valve Guide

Fuel pipe fuel filter to feed pump

Engine Wiring Harness: 6R CPCB

Battery Cable Assembly

Valve pair inlet &Exhaust

Cyl Liner assembly

Piston Ring set 105 Dia

Cyl Head Gasket 1.22 MM Thick

Set of joints - 6R1080TA

Set of 'O' rings 6SL9088T 250 KVA

Set of copper washer

Valve seal

Kit Fuel Injection pump repair

Injector Calibration

Boring of cylinder Head

Radiator assembly cleaning & Silencer decorbonising

Description all as per Sl No 1.00 here-in - before but for 100 KVA DG Set

Supply only following spare parts as mentioned at Sl No. 1.00 for 100 KVA DG Set above:-

Spinion Lub Oil filter

Fuel Filter (Primary & Secondery)

Primary Air filter element

Safety Air filter element

Oil seal (115x140x12)

Oil Seal (65x85x13)

V Belt XPA 1250 Cogged

V belt cogged (BX-48)

By pass hose : 58MM long

Hose pipe Radiator to waterpump 45x45x130L

Hose pipe to waterpump 45x45x80L

Crankshaft assembly with Gear

Vent pipe for Radiator

Leak off Pipe Assembly

Hose water pipe

Fuel pipe 7.5 14x14 B 700 PB

Fuel pipe 8.0 14B 1000WB

Conversion kit from KG 934 to KG 645

Engine Wiring Harness: 6R CPCB

Lube Oil Pressure Sensor

Startor 12V 3 KW

Stop Solenoid assembly : 12V DC

Cylinder head gasket

Kit Fuel Injection pump repair

Injector Calibration

Boring of cylinder Head

Battery Cable Assembly 35sqmm

Radiator assembly cleaning

Description all as per Sl No. 1.00 here-in - before but for 50 to 62.5 KVA DG Set

Supply only following spare parts as mentioned at Sl No. 1.00 for 50 to 62.5 KVA DG Set above:-

Spinion Lub Oil filter

Fuel Filter (Primary & Secondery)

Primary Air filter element

Safety Air filter element

Oil seal (115x140x12)

Oil Seal (65x85x13)

V Belt XPA 1250 Cogged

By pass hose : 58MM long

Battery Charger 12V 6Amp

Hose pipe Radiator to waterpump 45x45x130L

Hose pipe to waterpump 45x45x80L

Mechanical Fuel level sensor assembly

Vent pipe for Radiator

Leak off Pipe Assembly

Hose water pipe

Fuel pipe 7.5 14x14 B 700 PB

Fuel pipe 8.0 14B 1000WB

Conversion kit from KG 934 to KG 645

Engine Wiring Harness: 6R CPCB complete replace

Battery Cable assembly 35 sqmm

Radiator assembly cleaning

Description all as per Ser No. 1.00 here-in - before but for 25 to 40 KVA DG Set

Supply only following spare parts as mentioned at Sl No. 1.00 for 25 to 40 KVA DG Set above:-

Spinion Lub Oil filter

Fuel Filter 1.1 Ltr

Primary Air filter element

Cyl Head Gasket 1.22 MM Thick

Oil seal (115x140x12)

Oil Seal (65x85x13)

V Belt XPA 1250 Cogged

CON Rod Bearing HA 394 STD

By pass hose : 58MM long

Hose pipe Radiator to waterpump 45x45x130L

Hose pipe to waterpump 45x45x80L

Mechanical Fuel level sensor assembly

Vent pipe for Radiator

Leak off Pipe Assembly

Hose water pipe

Fuel pipe 7.5 14x14 B 700 PB

Fuel pipe 8.0 14B 1000WB

Conversion kit from KG 934 to KG 645

AVR For 35-25 KVA DG Set

Engine Wiring Harness: 6R CPCB

Fuel tank assembly with accessory

Battery Cable Assembly 35sqmm

Radiator assembly cleaning

Labour only for attending the breakdown/nonfunctioning of any capacity/make DG sets, AMF panels by deploying one Number Technician & helper for checking all components and rectify the fault and give report to concerned JE complete all as specified and directed by Engr-in-Charge. Note : (i) Spare parts for rectify the fault will be measured and paid separately. (ii) The contractor shall also provide DG Set technician on Sunday & holiday if required or asked by JE E/M/Engineer-in-charge. (iii) If contractor failed to provide their DG Set technician or absent to attend the complaints / minor complaint within 24 Hrs, then the recovery will be effected at Rs 1000.00 per day per complaints.

M&L for replacement of unserviceable auto main failure (AMF) panel of capacity upto 62.5 to 100 KVA capacity DG set includign all internal electrical connections,sensor, ATC switch,DG on /off facility, Busbar, wire, lugs,cable tray, panel box 18 guage thickness etc complete commissioning & testing all as specified and directed by Engr-in-Charge.Note:- Including following spare parts of AMF panel above quoted rate:-(a) MCx 130 Amp four pole power contactor-02nos,(b) Contactor side block - 02 nos,(c) Du 125 amp three pole Mccb -02 Nos, (d) Spreader link -02 set, (e) Amf controller -01 Nos, (f) 12V/24V battery charger-01 No,(g) Glass Relay-02 Nos, (h) Current Transformer-03 Nos, (j) R,Y,B indicator - 03 Nos,(k) 6 Amp single pole controler MCB-06 Nos,(l) Auxilary Contactor-02 nos.

M&L for drain out old engine oil from DG set/ Vehicle and replace with new Engine oil servo type in 20 Ltrs seal pack 20W/40 & 15W40 or as per site requirement. Make : Castrol/HP//Gulf/KOEL Care

M&L for Inhibitor corrosion (coolant additive concerntrate) required for top up complete all as directed by Engr-in-charge

Supply and topping up of acid mixture suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge

Supply and topping up of distilled water suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge.

M&L for dismantling of exhaust pipe of the DG set by unscrewing nuts and bolts and taking down the pipe with muffler removing the burnt out asbestos rope and replaced with new asbestos rope, well wrapping with new aluminium metal cladding with glass wool including cleaning the silencer, welding if required, painting and refixing the same in its original position complete all as directed by Engr-in-charge for the following capacity DG sets :-

25 to 40 KVA DG Sets

50/62.5 KVA DG Sets

100/125 KVA DG Sets

250 KVA DG Sets

M&L for Canopy Restoration & Painting of DG set by scrapping of old paint complete and painting with two coats of Aspa super finish paint/as per exisitng colour/make with spray pump applying before polyplaster automative putty on rusted/scratch area of fwg capacity of DG sets complete all as specified & directed.

25 KVA to 40 KVA

50 KVA to 62.5 KVA

250 KVA DG Sets

M&L for replacement of lead acid battery of cap 150 AH, 12V, complete all as specified and directed. Make : Exide New Xpress or its equivalent Amaron/Luminous

M&L for repair/Replacement of unserviceable automatic voltage regulator (AVR) of capacity upto 62.5 to 100 KVA capacity DG set includign all internal electrical connections, testing all as specified and directed by Engr-in-Charge.

M&L for dismantling of old unservicable door lock with catcher & replace with new LH/RH lock with catcher for canopy of DG set any capacity including welding work if required refixing the same in its original position complete all as specified & directed by Engr-in-charge.

M&L for dismantling of old unservicable door hinges & replace with new SS LH/RH hinges for canopy of DG set any capacity including welding work if required refixing the same in its original position complete all as specified & directed by Engr-in-charge.

M&L for replacement of existing earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.00 mm thick buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth strip protect0ed by galvanized steel pipe 40 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 3 of SSR-2010 Part I and including necessary excavation and earth work in any type of soil, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC (1:3:6) type C-1 chamber, MS cover of thickness 5mm openable type and having suitable locking arrangement and MS frame of suitable size made of angle iron 50 x 50 x 60 mm, complete all as specified. Note: (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 0.5 metre away from earth.

Supply and fix in replacement of Galvanised iron strip 32x6mm burried in the ground/pipe/wall and dully connected to machinery with nuts bolts washers and thimbles complete all as sp and directed.

M&L for lifting the Gen Set of capacity 62.5 to100KVA after disconnection complete from cables, shifting to other place whereever directed by engr-in-charge and making PCC foundation of size suitable to existing DG set with 1:2:4 including smooth finishing, shifting of DG set on new foundation with all necessary arrangement of cable connections, testing and commissioning complete all as directed by Engr-in-charge. Note :- all items, manpower including crane for lifting up and placing again on new foundation is included in quoted rates.

Taking down of existing canopy of DG set 62.5 KVA and S&F new Acoustic enclosure (Canopy) of 62.5 KVA DG set fabricated with 2mm thick CRCA sheet as per existing size of DG set . The noise level shall be 75 dBA or better at a 1 meter from the canopy surface confirming to environmental (Protection) rules issued by CPCB, Govt of india.The following Feature of the Product is as under complete all as specified. (i) Rust/Corresion free. (ii) Proper design as per existing (iii) Noise control as per CPCB (iv) Proper Air intake and Exhaust system (v) Provide Stailess steel heavy duty locks and Hinges with 04 Nos Door. (vi) Powder coated finish as per existing colour. Note :- All items, manpower including crane for lifting up and placing again on new/existing foundation, connection/disconnection of cable is included in quoted rates.

M&L for in replacement of XLPE insulated, screened, PVC shethed, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 16 Sqmm 4 core laid in trenches or under road including jointing and testing complete all as specified and as directed. (Note: Excavation, cable protection work will be measure & paid separately)

Description all as per serial item No: 25.00 here-in- before but of size 25 Sqmm 4 core.

Description all as per serial item No: 25.00 here-in- before but of size 95 Sqmm 3.5 core.

Description all as per serial item No: 25.00 here-in- before but of size 120 Sqmm 3.5 core.

Supply and laying in replacement in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 16 Sq mmx 2 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed.

Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 in deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point.

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps as size of DWC pipe is 63mm O/D and 50 mm Inner dia all as specified and directed by Engr in Charge.

Description all as per Sl item No 33.00 here-in-before but of size 76mm outer dia and 63mm inner dia.

EICHER CANTER Comprehensive maint and servicing, oiling, Hub greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, replacement of coolant, brake oil, stearing oil, engine oil, cleaning and maint of radiators, maint of battery with electrolyte solution, distilled water, wheel alignment, cleaning of fuel tank complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately.

Supply only following spare parts of vehicle as mentioned at Sl No. 35.00 above:-

Fuel filter (Primery & Secondry).

Oil Filter

Air Filter

Tail light assy

Fan Belt

Wiper motor

Wiper arm with rubber blade

Repair/servicing/cleaning of raditor for cooling finns core tubes bottom and upper tank leakage if any found.

Side mirror

Foot mat

Head light assy (Left & Right)

Cabin light

Indicator light assy (Left & Right)

Grease

Repair and overhauling of defective suspension system and checking of parts such as shock absorber, front spring leaf, centre bolt, front spring leaf hanger, front spring leaf, shackle pin, rear spring leaf, rear spring leaf hanger, rear shackle pin of Eicher veh and complete all as spfd and directed. Note : Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for suspension system for Eicher Veh:-

Shock absorber front

Shock absorber bush

hanger front

hanger rear

Ball Joint

Load Spring various size

Tensioning the road spring upto the required and original position and assembling the same with nuts, center bolt and clamps-04 Nos and bushes complete all as specified and directed

Repair and overhauling of defective brake system and checking of parts such as front disc brake, rear wheel cylinder, master cylinder, rear brake shoe, front disc brake pad, front disc break caliper assembly complete brake pipe, rear wheel brake shoe spring & locking assembly and testing complete all as specified and as directed. Note : Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for braking system mentioned in above item No 39.00 :-

Front brake disc

Rear wheel cylinder kit

Rear brake shoe

Pressure plate

Rear wheel brake shoe spring & locking assembly

Clutch plate

M&L for repair and Calibration of FIP and governor by replacing pump elements, delivery valve, plugs, springs, gaskets sleeves, washers filters etc and testing complete of Eicher.

M&L for repair to self starter by replacing damaged,Armature winding, pinions springs etc complete incl rectifications of electric wiring of the engine complete all as directed.

M& L for repair /rewinding of unsv alternator (dynmo) of Veh Eicher Canter complete all as specified and directed.

MOTOR CYCLE HERO HONDA /HF DELUXE Comprehensive maint and servicing, washing, oiling, greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/oil filters, replacement of bulbs, fuses, repairing of wiring, maint of battery with electrolyte solution, distilled water complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately.

Supply only following spare parts of vehicle as mentioned at Sl No. 44.00 above :-

Speedometre cable

Spark plug

Indicator Assy front side

Indicator Assy rear side

Horn Assy

Oil Filter

Chain Spocket

Clutch/Race cable

Chain with revet

Side mirror

Front light assy complete

Rear light assy complete

Repair and overhauling of defective shocker system of motor cycle and carry out the repair including replacement of the defective spare parts and assembling the same and testing complete all as specified and as directed. Note : Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for shocker system of motor cycle :-

Rear shocker

Oil pump in built front shocker

hydraulic oil

Shock Absorber

Repair and overhauling of defective brake system of motor cycle, replacement of defective spare part like brake shoe etc and assembling the same with testing complete all as specified and as directed.

Taking out old seat cover and fixing new seat cover (complete set of motor cycle) after necessary repair of original seat and cushion by stitching the worn out seat, fitting seat materials of good quality and fixing the same to their proper place neatly complete all as specified and as directed.

Dismantling and taking down the gear box of MC repair and overhauling including replacement of worn spare parts and testing completed all as specified and as directed.

M & L for repair /rewinding of unsv altornator (dynmo) MC self starting type system defected any type complete repair deemed to be quoted rate complete all as specified and directed.

MARUTI DZIRE (STAFF CAR) Comprehensive maint and servicing, washing, oiling, greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/oil filters, replacement of bulbs, fuses, repairing of wiring, maint of battery with electrolyte solution, distilled water complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately.

Supply only following spare parts of vehicle as mentioned at Sl No. 52.00 above :-

Fuel filter (Primary & Secondary)

Oil filter

Air filter

Perfume 250 ml.

Matting complete set.

Computerized alignment and balancing of wheels

Head light with assy (Left & Right Rear)

TATA XENON /TATA Mobile 207 DI Comprehensive maint and servicing, oiling, Hub greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/oil filters, replacement of bulbs, fuses, repairing of wiring, maint of battery with electrolyte solution, distilled water and replacing all the monogram with new monogram and letter writing with redium retro letter writing complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately.

Supply only following spare parts of vehicle as mentioned at Sl No. 54.00 above :-

Oil Filter

Fuel filter (Primery & Secondry).

Staring cover

Mud flap for veh

Complete set of Mat including floor mat of the vehicle.

Side mirror

LED fog light complete assy (L+R)

Head light complete assy (L+R)

Indicator light assy (L+R)

Fan Belt

Fuel Tank cleaning

Wiper arms with blade

Wiper motor with pipe & connected items

Air cleaner filter element

Door lock assembly complete set

Horn Assy

Raditor servicing/cleaning incl. repair if any water leakge found.

Computerized alignment and balancing of wheel

Grease

Repair and overhauling of defective brake system and checking of parts such as front disc brake, rear wheel cylinder, master cylinder, rear brake shoe, front disc brake pad, front disc break caliper assembly complete brake pipe, rear wheel brake shoe spring & locking assembly and testing complete all as specified and as directed. Note : Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for braking system mentioned in above item no 56.00. :-

Front brake disc

Rear wheel cylinder kit

Rear brake shoe

Pressure plate

Rear wheel brake shoe spring & locking assembly

Clutch plate

Repair and overhauling of defective shafting system and checking of parts such as propeller shaft, centre bearing, centre bearing clamp and rubber pad, universal cross, yok, teeth and testing of Tata Mobile/Xenon/Eicher complete all as directed. Note :- Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for shafting system mentioned in above item no 58.00 :-

Centre bearing

Tie rod with end set

Centre bearing clamp

U J Cross bearing

Repair and cleaning of defective silencer assembly including necessary cutting, welding, cleaning and assembling complete of Tata Mobile/Eicher all as specified and directed. Note : Major spare parts required shall be measured and paid seperately as supply only.

Supply only following spare parts for Silencer Assembly of Tata Mobile/Eicher as per above item no.60.00:-

Muffler

Manifold

Silencer pipe Assy

M&L for taking down of existing footrest of Iron type from TATA Mobile/Xenon vehicle and S&F new stainless steel footrest of 4/6mm thick Mild Steel pipe as per existing size of footrest complete as specified & directed by Engr-in-Charge.

Taking out old seat cover and fixing new Leather seat cover (complete set front and back) after necessary repair of original seat and cushion by stitching the worn out seat, fitting seat materials of good quality and fixing the same to their proper place neatly complete of Tata Mobile/Xenon all as specified and as directed.

Dismantling and taking down the gear box of repair and overhauling including replacement of worn spare parts i.e. gear liver kit, Gear pinion 1st, 2nd, 3rd, 4th and 5th and other minor spares and testing of Tata Mobile/Xenon completed all as directed.

Taking down old unserviceable silencer replace with new silencer of Tata Mobile/Xenon including necessary accessories as per OEM and assembling complete of all as specified and directed.

Dismantling and taking out defective water pump from Tata Mobile/Xenon and supply & Fixing new water pump with complete accessories as per existing OEM complete the re-assembling the same after testing and commissioning comlete all as specified & directed.

Dismantling and taking out defective water pump from Eicher and supply & Fixing new water pump with complete accessories as per existing OEM complete the re-assembling the same after testing and commissioning comlete all as specified & directed.

Taking out old front wind shield glass and fixing new front wind shield glass with wind shield glass paste,moulding packing etc complete necessary work as required of good quality complete of Tata Xenon all as specified and as directed.

Taking out old front bumper and fixing new bumper(complete set front side) after necessary repair work as required of good quality and fixing the same to their proper place neatly complete of Tata Xenon all as specified and as directed.

M&L for repair of Engine and calibration of FIP and governor by replacing pump elements, delivery valve, plugs, springs, gaskets sleeves, washers filters etc complete all accessories as required of Tata Mobile/ Xenon/Eicher and testing complete.Note:- The quoted rate deemed to be inclusive of manpower, Engine all accessoriesas as required ,charges for transporting engine to workshop and back after repairs & testing complete.

Supply, fixing, connecting & testing battery 12 volts,80 AH for Tata Xenon/Tata Mobile/Eicher Vehicle with lead acid terminal, indications of charging position and terminal for connection etc initial charging and taking out the old battery complete all as specified and directed.Make: Exide/ Amaron/ livguard.

Supply, fixing and connecting & testing battery 12 volts, 2.5 AH for Hero Honda motor cycle Vehicle with lead acid terminal, indications of charging position and terminal for connection etc initial charging and taking out the old battery complete all as specified and directed. Make:- Exide/ Amaron/ livguard.

M&L for repair to self starter and battery charger/ Dynamo by replacing damaged pinions springs etc. complete incl rectifications of electric wiring of the engine complete Tata Mobile/Xenon.

M&L for repair/ rewinding of unsv alternator (dynmo) of Veh Tata Mobile/Xenon complete all as specified and directed.

Supply and fixing in replacement of tubeless tyre of size 215/75R16 or as per OEM suitable for Tata Xenon and taking down old cover outer complete all as spd and directed. Make: MRF/ Apollo/ Bridgstone/JK.

Periodical Maint with material and servicing of the Car washing plant installed at MT yard GE NAMS for checking the serviceability of the plant, oiling,testing of the motor and belt, connecting the wires and control, replacement of belts, brass nozzles with clamp, pressure guage, water hose pipe etc complete all as directed by Engr-in-charge Note: water Hose pipe measured and Paid separetly.and balance all work rate shall be including quoted rate..

Periodical Maint with material and servicing of the Air compressor plant installed at MT yard GE NAMS for checking the serviceability of the plant, oiling,testing of the motor and belt, connecting the wires and control, replacement of belts, brass nozzles with clamp, pressure guage, air hose pipe etc complete all as directed by Engr-in-charge Note: Air Hose pipe measured and Paid separetly.and balance all work rate shall be including quoted rate..

Supply & Fixing of water Hose pipe for washing point as per existing capacity of Pipe complete all as specified.

Periodical Maint with material and servicing of the chain saw hexa machine (Gasoline Machine) for checking the serviceability of the Machine, oiling,testing of the carborator, plug and chain, connecting items and control, replacement of chain with new chain,Carborator and plug as per existing size complete filling T-2 Oil as per capacity provide in working condition of machine by without any extra cost complete all as directed by Engr-in-charge Note: Chain saw blade,Carborator, Plug, T-2 oil and all work rate shall be including quoted rate..

Material and labour for replacement of Transformer mounted trolley for transformer of size 2.8 x 2.5 Mtr made out of mild steel angle/ chanels medium weight beams & MS flates withj necessary welding in any postion driliing in hot/cold etc for longitude and cross members of trolly made out of ISMC chanel 100 and top of the members coverd with 6 mm thick MS plate plateform and vertical support over the plateform with MS equal angle of size 50 x 50 x 6 mm thick angles with MS flate 50 x 5 mm thick for two runs of bracing the supports, V type towing frame with hook with spring and check nuts and mounting bracket with bush for movement of tow assembly. The assembly made out of ISMC chanel 100 with long and cross member, turning plate assembly for front wheel only fitted in front axle, the front and rear axle made out of medium weight beam ISMB 100 including tyre with tube F78-15 8 play rataing four nos with wheel drum, mounting bracket, bearings, check nuts, locknuts, key etc welded with medium beam with nut bolts washers as required for mounting the transformer all as directed.

M & L for repairing the dent at diffrent location/ patches on surface of vehicles TATA Mobile and prepairing the base with one coat of 2k paint and after then apply one finishing coat with 2K paint by using spray machine on repaired surface to match the existing colour etc complete all as specified and directed.

Supply only Brake oil of suitable grade as recommended by OEM or authorised ageny for vehicles complete all as specified and directed. Make:- Castrol/ Shell/ Gulf

Supply only Gear oil of suitable grade as recommended by OEM or authorised ageny for vehicles complete all as speciied and directed. Make: Castrol/ Shell/ Gulf

M & L for replacement of complete wiring with new wiring including all connected accessories suitable for Tata Xenon/Eicher complete all as directed.

M & L for charging of AC gas as per OEM complete with testing & servicing of Air conditioning of Vehicle including all connected accessories suitable for Tata Xenon/Dzire complete all as directed.

M & L for replacement of complete wiring with new wiring including all connected accessories suitable for Motor Cycle Hero Honda complete all as directed.

S&F in repair for cable end termination joint suitable for 1100 volt grade XLPE LT cable, outdoor type terminal heat shrinkable type joint complete with all jointing material and accessories suitable for 3.5/4 core PVC/XLPE insulated armoured cable of size upto 70 to 150 Sqmm 3.5/4 core complete all as specified and as directed. Make: Raychem/Denson/M-Seal

S & F in replacement of MCCB four pole 100 Amps with breaking capacity 16KA , 415 Volts, fixed thermal & magnetic release including making all incoming/ outgoing connections fixed & MCCB matching with the existing slots complete all as specified and directed by Engineer in Charge.

S & F in replacement of MCCB four pole 200 Amps with breaking capacity 36 KA , 415 Volts, adjustable thermal & fixed magnetic release including making all incoming/ outgoing connections fixed & MCCB matching with the existing slots complete all as specified and directed by Engineer in Charge.

S&F in replacement of ON load change over switch with SS sheet metal enclosure, 415 V, 4 pole of capacity 315/320 Amps including connecting up incoming and outgoing cables with suitable lugs and testing complete all as specified & directed.

S&F in replacement of ON load change over switch with SS sheet metal enclosure, 415 V, 4 pole of capacity 200 Amps including connecting up incoming and outgoing cables with suitable lugs and testing complete all as specified & directed.

M & L for cleaning of installation/ substation including clearing of vegitation, wild growth and trimming of grass etc around the installation compound and removing rubbish off the premises and repair the existing iron angle if they are hanging outside to be fixed/buried in ground properly complete all as specified and as directed by Engr-in-charge.

M & L for washing the complete light vehicle (PC) vehicle with foam removing all dust particles from outside and inside using vacuum cleaner, including polishing dash board or other internal parts, greasing, tightning the loose nuts, bolts etc. complete all as directed.

M & L for washing the complete heavy vehicle (LCV) vehicle with foam removing all dust particles from outside and inside using vacuum cleaner, including polishing dash board or other internal parts, greasing, tightning the loose nuts, bolts etc. complete all as directed.

HARPAL ENGINEERS AND BUILDERS (BID ID -3133630)

Santokh Singh and Associates (BID ID -3135279)

CHINAR ENGINEERS AND BUULDERS (BID ID -3134976)

tarvinder singh (BID ID -3135030)

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3127337)