SPL REPAIR TO FLOORING TOILETS AND KITCHEN OF BUILDING NO P 27A 27B AND 27BD OF KB ROAD UNDER GE EAST LUCKNOW

Amount

Demolition of brick work built in cement mortar including all of quoins, arches, pillars etc but excluding ashlar facings and precast concrete articles complete all as specified and directed.

M&L for brick work with Sub class 'B' bricks staright or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete as in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Taking down 15mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and as directed.

Taking down 20mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and as directed.

Cutting chases, pining in, making good to facing where required and pointing in CM 1:3 for concealed water tubing making good, cutting exc 10cm but n.exc 20cm girth in brick walls complete all as specified and directed.

S&F of 15 mm bore steel tube, medium grade, galvanised with all fittings such as bends, elbows, tee etc and fixed to walls and ceiling complete all as specified and directed.

S&F of 20 mm bore steel tube, medium grade, galvanised with all fittings such as bends, elbows, tee etc and fixed to walls and ceiling complete all as specified and directed.

Dismantling of water storage tanks exc 500 ltr but n.exc. 1000 ltr capacity and removing from site complete all as specified and directed.

Dismantling of water storage tanks exc 250 ltr but n.exc.500 ltr capacity and removing from site complete all as specified and directed.

S&F 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoaisted and fixed in position complete all as specified and directed.

S&F 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoaisted and fixed in position complete all as specified and directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with epoxi coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min 20mm-210gms) complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. NOTE : Water proofing liquid shall be measured and paid separately.

M&L for 15 mm thick rendering in CM 1:6 on brick or concrete surfaces on wall and finished surface even and smooth witout using extra cement complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of concrete surfaces finished even and fair in ceiling in CM 1:3, complete all as specified and directed.

M&L for preparation of old/new plastered surface of wall and applying 3mm thick wall care putty (Make : Birla/JK White) complete all as specified and directed.

M & L for applying two coats of plastic emulsion paint over a coat of primer on new / old plastered surface including preparation of surfaces,complete all as specified and directed

M & L for applying two coats of plastic emulsion paint in ceiling, complete all as specified and directed.

M&L preparation of old/new surfaces of wall and applying two or more coats of weather proof exterior emulsion paint VOC less than 50 gm/litre and uv resistance as per IS 15489-2004 Alkali or fungal resistance dist resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including one coat of exterior prier applied @ 0.9 litre/10 Sqm over new surfaces complete all as specified and directed.

M&L for preparation of old surfaces steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of previously untreated surfaces steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old/new painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

Roughning surface of old concrete floor by picking sweeping clean and washing with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified and directed.

M & L for non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceedubg 0.18 Sqm but not exceeding 0.36 Sqm , in floors etc laid over and including 15 mm thick cement mortar screed in cm 1:6 and pointed with white cement mixed with pigment to match the shade of tiles complete all as specified and directed.

S&F Non-skid joint free ceramic coloured floor tiles (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed .

S&F glazed coloured ceramic digital tiles 600x300x7mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 10 mm thick rendering in CM 1:4 as on vertical surfaces complete all as specified and directed.

M&Lin repair CI floor trap 75mm with grating incl jointing to waste pipe fixed in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and directed.

M&Lin repair CI floor trap 100 mm with grating incl jointing to waste pipe fixed in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and directed.

S&F in repair 75 mm bore UPVC (SWR),SCH-40 pipes single socketed in any length with rubber ring joints laid in trenches or floors,complete all as specified and directed.

S&F in repair 75 mm UPVC (SWR) bends any radius, complete all as specified and directed.

S&F in repair 110 mm bore UPVC (SWR),SCH-40 pipes single socketed in any length with rubber ring joints laid in trenches or floors, complete all as specified and directed.

S&F in repair 110mm UPVC (SWR) bends any radius,complete all as specified and directed.

S&F in repair coloured viterious china WC (ET) wall/floor mounted with dual flushing cistern incl all necessary fitting such as flush pipe waste pipe fixed as in repair of approvad shade complete all as specified and directed.

S&F in repair viterious china coloured WHB 600 x 480 mm counter top oval shape cascade pattern with single hole basin mixer taps Cat part No 51011 of Jaquar or equivalent as approved by GE,cast copper alloy capstan heads CP PVC connection, CP bottle trap cat part No 569 of jaquar or equivalent as approved by GE and CP waste coupling 32mm dia in lead to waste pipe complete all as specified and directed.

S&F in repairs vitreous china Wash hand basin flat back, size 550x450mm white excluding pillar taps & waste pipe but including Waste coupling CP and fixing brackets complete all as specified and directed.

S&F in repair chromoium plated box type toilet paper holder fancy complete all as specified and directed.

S&F in repair soap dish of fancy type complete all as specified and directed.

S&F glass self/corner self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 cm long complete all as specified and directed.

S&F in repair bib tap 15mm dia long body,chromium plated, fancy type complete all as specified and directed.

S&F in repair brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type complete all as specified and directed.

S&F in repair CP Towel ring 200mm dia superior quality fixed as in repair complete all as specified and directed.

S&F PVC connection of 15mm bore,600mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type fixed complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F brass chromium plated wall mixer for mixing hot & cold water in 3-in-1 with telephonic hand shower and 1.50m long flexible lead & screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair aluminium curtain rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads at both ends and middle support, rings etc. complete all as specified and directed.

S&F in repair health faucet for EWC CP hand hold with flexible pipe complete all as specified and directed.

S&F in repair 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed.

S&F in repair CP Shower rose with arms 15mm dia complete all as specified and as directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed.

Dismantling timber scantling in unframed work of section over 40 sqcm complete all as specified and directed.

Dismantling timber fillets, rails etc. under 40 sqcm complete all as specified and directed.

S&F18 MM thick veneered decorative plywood grade-1(with BWR Resin)with one face decorative veneer,fixed with screws to timber frame work incl other face decorative laminate type-1 of surface finish colour and pattern as approved,fixed with approved adhesive as per manufacturer instruction,complete all as specified and directed.

M&L for wooden scantling 40 sqcm and over in section,in any position,unframed work/clean sawn,complete all as specified and directed.

M&L 2nd CL HW plain fillets exc 13 & n exc 25 sqcm in sectional area square rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.

M&L two coats of melamine wood polish on new /old wooden wall surfface/wood based material including removing/cleaning and prepration of the surface including a coat of wood filler complete all as specified and directed.

Dismantling battens for tiles,shingles,etc of any sizes including tilting fillets etc,spaced n. exc. 15 cm.for floor/skirting/dados,complete all as specified and directed.

M&L for 2nd class hard wood ,wooden plank of thicknes 10.5 mm, width not exc. 25 cm,complete all as specified aand directed

M&L for 75mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even without using extra cement, complete, all as specified & directed.

M&L for sand filling under floor well ramming complete, all as specified & directed.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed.

M&L hard core of gauge n exc 63mm, deposited spred and levelled in layers n exc 15 cm thick, warered and rammed to a true surface complete all as specified and directed.

Excavation in post holes (or similar) each n exc 0.5 Cum, gatting out returning filling, in and ramming earth or broken rubble mixed with earth around in layers n exc 25 cm watering and removing surplus soil to distance n exc 50 m and making good surface in soft/loose soil complete all as specified & directed.

M&L for PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in posts etc complete all as specified and directed.

S&F mild steel section such as tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade ST-240 complete all as specified and directed.

S&F of MS plate as rest plate of truss forming hole for anchor bolt without any arrangement complete all as specified and directed.

S&F Framed work of angle iron, boxes for framed work for shade, cattle trap and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F coloured pre-painted GALVALUME aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including necessary washers etc all as per manufacturers instruction complete all as specified and directed.

S&F in repair 150 mm long fancy brass handle cast type for cupboard & wardrobe shutter complete all as specified and directed.

S&F in repair 300 mm long brass sliding door bolt for door shutter complete all as specified and directed.

S&F in repair 450mm brass skelton tower bolts with cast brassplate and staples aqnd rolled or drawn brass bolts and fixed for door shutter complete all as specified and directed.

S&F hydraulic slider of size 8"x1"x1/2" with steel ball, Aluminium body and striking plate incld letting complete all as specified and directed.

S&F 100mm brass Mortice lock (Godrej pattern), vertical type, 4-lever complete all as specified and directed.

S&F auto hinges of 3"X2"X1" size SS body complete all as specified and directed.

S&F continous piano hinges of brass with width 30mm of flap complete all as specified and directed.

Supply and fixing in repair stainless steel wardrobe trolly of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete all as specified and directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x6 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x4 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

Supply and fixing in repair stainless steel modular type basket of size 20x20x4 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

S&F in repair 15mm bore CP sink mixer with swinging casted spout with aerator for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 12 mm thick toughened glass door shutter of opening size 0.90 x 2.0 m in single leaf with necessary fittings,aluminium top and bottom rail locking arrangement,complete all as specified and directed.

S&F Shower panel in stall wade of Acrylic of white/colour complete 0.335 x 1.38 mtr size with 100 mm bore 2 shower 50 mm bore six shower (body jet ) built in shleves for toiletries including single liquire divertor/mixture device complete all as specified and directed.

Dismantling of iron work/mild steel/wroght iron complete all as specified and directed.

Dimolition of lime concrete of any description and in any position not otherwise specially provide for roof complete all as specified and directed.

Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement . (Liquid water proofing compound to be measured paid separately) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as spesified and directed.

S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Sqare tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles beading, and joined to gether with solvent cement, suppling and fixing in the frame complete all as specified and directed.

S&F butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

M&L for two coat cement base paint on old prepared plastered surface with preparation of surfaces complete all as specified and directed.

M&L two coat cement base paint on new plastered surface over one coat of primer with preparation of surfaces complete all as specified and directed.

Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey and cutting holes for hold fasts & making good complete all as specified and directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity, white with all fitting and fixtures including brackets and 32mm bore PVC flush pipe complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed.

S&F of 60 mm thick M-35 grade ISI Marked, Machine pressed, precast concrete rubber moulded interlocking coloured paver block of any shape and size over and including 25 mm thick sand cushion complete all as specifed and as directed.

M&L for exterior coloured tiles of size 30 cm x 30cm x 10 mm thick heavy duty factory made set jointed and pointed in neat cement slurry as in floor with gray cement and pigements laid over and incl 20 mm thick screed bed in CM 1:4 finsihed even and fair complete all as specifed and as directed.

S&F in repair chromium plated brass hole basin mixture with hot and cold arrangement and long screwed shank and cup suitable for 15mm bore pipe complete all as specified and directed.

Desmantling of asbestos cement (corrugated or sami corrugated etc) corrugated translucent sheeting in roof covering complete all as specified and directed.

S&F in repair 2.00 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

Supply and Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old brocken glass (any thickness, size, quality or description for as matal frame including purifying or drilling out old glazing panes) springe clips and providing prang new ones complete all as specified and directed.

Supply and Fixing in repair sheet glass 4.00mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Supply and Fixing wooden flooring 1.25 m x16.5 cm x 8.3 mm HDF, AC, Mat finish, wax coated edges laid as per manufacturers instructions complete all as specified and directed.

QUALITY CONSTRUCTIONS CO