CERTAIN MISC WORKS IN STORAGE SHEDS AT NSD MANKHURD , NSD SEWRI AND PERIODICAL SERVICES TO OTM, MD ACCN CERTAIN MISC B/R WORKS AT BCF, NSD SEWRI UNDER GE (NW) MANKHURD

Amount

Material & labour for 15mm thick in two coats (10+5mm) polymer modified ready mix cement based plaster on the wall surfaces complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm, including taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water complete and debris to be removed out side of MoD land upto requisite distance complete all as specified and directed by EIC Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemed to be include for the provosion of dubbing of the surface and nothing extra shall be payable on this account and applying of necessary scaffolding and safety arrangement to be provided as per requirement of site and payable for the same also deemed to be included in quoted rates.

Material & labour for 15mm thick in two coats (10+5mm) polymer modified ready mix cement based plaster on the wall surfaces complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces on walls, applying three coats of white wash complete all as specified and directed. including taking down of plaster, raking out joints, hacking for keys, scrubbing down with water and debris to be removed out side of MoD land upto requisite distance complete all as specified and directed by EIC Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemed to be include for the provosion of dubbing of the surface and nothing extra shall be payable on this account and applying of necessary scaffolding and safety arrangement to be provided as per requirement of site and payable for the same also deemed to be included in quoted rates.

Material & labour for 5mm thick polymer modified ready mix cement based plaster on the ceiling surfaces complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour Preparation of new plastered surfaces on ceiling and applying three coat of white wash complete all as specified. and directed. including taking down cement or cement lime plaster on concrete surfaces etc including raking out joints, hacking for keys, scrubbing down with water and debris to be removed out side of MoD land upto requisite distance. complete all as specified and directed by EIC Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemed to be include for the provosion of dubbing of the surface and nothing extra shall be payable on this account and applying of necessary scaffolding and safety arrangement to be provided as per requirement of site and payable for the same also deemed to be included in quoted rates.

M&L as in repairs for structural repairs to Columns,beams and slabs and chajja at maximum height of 8mtrs including scaffolding and safety arrangements completely all as specified and as directed by Engineer in Charge in following steps as mentioned below 1) Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of debris out side the premises etc. complete as directed. Hard concrete should not be removed by force & debris to be removed out side of MoD land upto requisite distance. 2) M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete including necessary welding as required and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

3)M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit or equivalent of STP pvt ltd by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. 4) M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem or M/s. STP pvt ltd as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application, complete all as specified and directed.

5) M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit or equivalent of STP pvt ltd upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, complete all as specified and directed. 6) M&L for 15mm thick in two coats (10+5mm) polymer modified ready mix cement based plaster on the wall surfaces complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces

M&L as in repairs for structural repairs to Columns,beams and slabs and chajja at maximum height of 8mtrs including scaffolding and safety arrangements completely all as specified and as directed by Engineer in Charge in following steps as mentioned below 1) Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of debris out side the premises etc. complete as directed. Hard concrete should not be removed by force & debris/malba to be removed out side of MoD land upto requisite distance. 2) M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete including necessary welding as required and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

3)M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit or equivalent of STP pvt ltd by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. 4) M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem or M/s. STP pvt ltd as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application, complete all as specified and directed.

5) M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit or or equivalent of STP pvt ltd upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, complete all as specified and directed. 6) M&L for 10mm thick polymer modified ready mix cement based plaster on the wall surfaces complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and directed.

M&L for providing CRS TMT FE 500D bars any dia in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members, complete all as specified and directed.

S&F as in repairs Pre-painted Corrugated galvalume sheet having aluminium zinc coating with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc. completely all as specified and as directed. including dismantling of old existing roofing sheet of any type.

S&F as in repairs Pre-painted Plain galvalume sheet having aluminium zinc coating with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc. completely all as specified and as directed. including dismantling of old existing roofing sheet of any type.

S & F as in repairs Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs at any position fixed with L-type or J-type or cranked hook bolts in patches complete all as specified and directed including dismantling of old existing roofing sheets

S&F as in repairs Asbestos cement ridge of any type/size and providing Asbestos cement one piece plain angular ridge 6mm thick in patches at any position fixed with L-type or J-type or cranked hook bolts in patches including dismantling of old existing roofing sheet complete all as specified and directed

S & F as in repairs Steel work in tubular /Rectangular hollow section in trusses, Posts, Purlins, Rafters etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 and S & F as in repairs Steel work Fe 410 F23-W (Gde- E- 250) quality-A in plates or gusset plates to truss including dismatling/taking down of old steel of any type complete all as specified and directed

M&L for Precast cement concrete block masonary with solid block in 1:3:6 type C1 exceeding 10 CM width and set in CM 1:4 including demolition of brick masonry of any type and debris to be removed out side of MoD land upto requisite distance complete all as specified and directed by EIC

M&L Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded granite stone aggregate) in drains, surface channels including demolition of old concrete complete all as specified and directed

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick or solid block masonary or concrete surfaces and finishing even and fair (without using extra cement) complete all as specified.

Material and labour for preparation of new plastered surfaces on walls, applying three coats of white wash complete all as specified and directed.

M&L for 75mm thick Cement concrete in C1 type (1:3:6) using 40mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement and cutting of cut @ 2m along the length of plinth protection including demolition of cement concrete in ground floors or pavings n exc 15 cm thickness complete and debris to be removed out side of MoD land upto requisite distance complete all as specified and directed by EIC Note: Quoted rates deemed to be include for cutting of joints & filling with filler materials of joints and nothing extra shall be payable on this account. Also joints to be cutted within 24 hours of laying of concrete.

M&L for design mix Cement concrete work M-30 (using 20mm graded aggregate) as in floor,hard-standing etc including demolition of cement concrete in ground floors or pavings n exc 15 cm thickness complete and debris to be removed out side of MoD land upto requisite distance complete all as specified and directed by EIC

Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound Grade ‘A’ all as specified and directed Note: The joints to be cut within 24 hours of laying of concrete.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 150 mm thick concrete slab complete all as specified and directed Note: The joints to be cut within 24 hours of laying of concrete.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' all as specified and directed Note: The joints to be cut within 24 hours of laying of concrete.

M&L for Cement concrete type C2 1:3:6 (40mm graded aggregate) 75mm thick as in sub base, floors and paving including demolition of cement concrete in ground floors or pavings n exc 15 cm thickness complete and debris to be removed out side of MoD land upto requisite distance complete all as specified and directed by EIC

M&L for Machine pressed precast coloured concrete interlocking 60mm thick precast cement grade M-35 with grey cement and pigment having compresive strength 35 N/mm2 laid with over sand cushinig after consolitation set and level the tiles on proper level with interlocking including 25mm thick sand filling under floors including watering and consolidation as an sand cushoining under interlocking tiles complete and including dismantling of old interlocking/paver blocks

M&L for preparation of old plastered surfaces on walls, preparation for Acrylic emulsion and applying applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over old surfaces

M&L for Complete removal of existing treatment and preparation of plastered surfaces on walls, preparation for Acrylic emulsion and applying applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over old surfaces

M&L for complete removal of existing treatment by washing, rubbing down and stopping of old decorated surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and levelling with minimum 1 mm thick white cement based wall care putty for obtaining plain surface complete all as specified and directed.

M & L for preparation of old distempering surfaces including stopping of nails holes,cracks etc. and applying one coat of oil bound distemper on wall complete all as specified.

M & L for aluminium anodised suspended false ceiling fixed in the panels of size consisiting of 600x600 mm lay in tiles 8 mm thick with PVC lamination on the face side and metalized polyester film on backside as granular pattern of saint gobain/Armstrong/equivalent; with aluminium anodised angle 30 x30 x 2 mm fixed along the wall and main and cross tees of size 31.75 x 31.75 x 1.6 mm screwed along side of walls fixed with wooden plugs and hanging from existing slab/ steel truss including 6 mm dia GI wire suspended adjustable level from rafter purlins(length as per site requirement) including dismantling of old false ceiling of any type complete all as directed by Engineer-in-charge. Note : The contractor's quoted rates shall also be deemed to include for making/ cutting opening in the ceiling of the required size and shape for fixing light fitting, cat walk and provision of neccesary scaffolding for complete work at maximum height of 8mtrs etc, complete all as directed.

Taking down Asbestos Cement gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including removal out of MD land (measured overall as fixed along the centre line over fittings and accessories) at the height of 8 Mtr and M&L for providing 160mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Or Pillars etc including scaffolding if required,

M&L for providing 160mm PVC (SWR) 45 degree Shoe bend in repairs with rubber ring joints fixed to walls Or Pillars etc

M&L for 75mm thick vacuum dehydrate flooring through mechanical process using requisite instruments/apparatus of grade M30 for foundations, flooring, basement slab including demolition of existing floor/surface and removing the debris out side MOD land upto requisite distance and Raking out joints, hacking for key, scrubbing with water, etc. with providing requisite construction/expansion/dummy joints and filler and sealing material complete all as specified and directed by GE/EIC Note: Quoted rates deemed to be include for cutting of joints, formwork as and where required, filler and sealing materials of joints and nothing extra shall be payable on this account. Also joints to be cutted within 24 hours of laying of concrete.

M&L for forming V grooves in plaster n exc 5 mm deep and n exc 5 mm on face and filling cracks with crack X paste of M/s Dr fixit or with eequivalent of M/s STP Ltd including necessary scaffolding

M&L for forming V grooves in plaster exc 5 mm deep and exc 5 mm on face and filling cracks with cement mixed with M/s Dr fixit or equivalent of M/s STP Ltd including necessary scaffolding

Taking down rolling shutters area n.exc 10 sqm each and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring worm gear, lock plate, ball bearings, Top sheet, Gear box and locking arrangements etc as required, greasing, oiling, servicing for smooth functioning of all parts complete all as directed including all spare parts and gear box and completely painting with one coat of primer and two coats of sythetic enamel paint complete all as specified and as directed by Engineer in Charge.. Note: No extra Payments against any item will be done and deemed to be included in quoted rate and Size of Opening will be considered for shutter size, Scaffolding if required shall also be deemed to be included in this item.

Taking down rolling shutters area exc 10Sqm and n.exc 15 Sqm each and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring worm gear, lock plate, ball bearings, Top sheet, Gear box and locking arrangements etc as required, greasing, oiling, servicing for smooth functioning of all parts complete all as directed including all spare parts and gear box and completely painting with one coat of primer and two coats of sythetic enamel paint complete all as specified and as directed by Engineer in Charge.. Note: No extra Payments against any item will be done and deemed to be included in quoted rate and Size of Opening will be considered for shutter size, Scaffolding if required shall also be deemed to be included in this item.

Preparation of old surfaces on ceiling (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified.

Preparation of old surfaces on wall (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified.

M & L for preparation of old wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of aluminium paint complete all as specified.

M & L for preparation of old wooden surfaces of any description n.exc 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M & L for preparation of old Steel surfaces of any description n.exc 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted surfaces of any description and applying one coat of cement base paint on wall with necessary scaffolding arrangement. Note: The contractor shall clean the window panes including splashes of paint etc and the quoted rate is deemed to be included for the same.

Taking down cement plaster of any description from brick or stone walls including raking out joints, hacking for key , scrubbing down with water etc and removing debris outside MD land complete all as specified

M&L for rendering 10mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and 1 mm thick (minimum) white cement based wall care putty on old surfaces of walls etc, finished even and smooth, complete all as specified and directed.

M&L for rendering 5mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces and applying three coats of white wash complete all as specified and directed.

M&L for removal of plant growth by injection with chemical glyphospate solution (4% concenteration) of 20ml or till refuse by cutting or injecting in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25ml glyphosphate complete all as specified.

M&L for Writing letters, alphabets or figures (Block, Roman, Italic or Indian) n exc. 30 cm high using synthetic enamel paint in language all as specified by Engr in Charge

Note : A SUM OF RS 31050.00 TOWARDS SCHEDULE OF CREDIT SHALL BE DEDUCTED TO ARRIVE THE CONTRACT SUM

Joy builders (BID ID -3343956)

M/s Mukesh Engineers (BID ID -3344196)

R.R.Construction.Co (BID ID -3344245)

sapana enterprises (BID ID -3344302)

Parmatma Enterprises (BID ID -3338866)

RAJENDRA CONSTRUCTION (BID ID -3338920)

RECON (BID ID -3337775)