REPAIR TO FOOTPATH, FENCING, COMPOUND WALL, DRAIN, APPROACH PATH ETC IN ZONE A, C AND D AREA UNDER GE CHENNAI

Amount

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exc 6mtr mean radius in CM 1:4 using old size bricks complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and painted in any mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling fencing wire any type and pattern complete all as specified and directed.

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M&L for Precast cover slab 1:2:4, type B1 (using 20mm graded aggregate) in landings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4set in CM 1:4, for manholes etc including demolition of existing cover slab complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and directed.

Desilting of covered drains/culverts of any size and depth including removal of mud/soils/grass and removal and refixing of cover slabs etc on drain /culvert and disposal of spoil to outside the MD land complete all as specified and as directed

S&F in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as directed & specified

M& L for hand rails, half round or others steel section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts brackets etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.,) including all necessary drilling, bolting or riveting etc., and similar work confirming to FE-290 Gde E-165 complete all as specified and directed.

Framed work such as grills, grating, etc with ends of bars shouldered and or riveted or forged into spikes, framed grating or similar work confirming to Fe 410-0 complete all as specified and directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc in CM 1:4 incl finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

15 mm thick rendering other than fair faces of brick work of walls etc 15 mm thick in CM 1:4 incl finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coat of cement base paint over one coat of chalk whitening complete all as specified and directed.

M&L for two coats synthetic enamel paint over a coat of red oxide primer on newly steel surfaces complete all as specified and as directed.

Chequered cement concrete tiles different colour& shape of size 300mm x 300mm x 20mm laid and jointed with grey cement slurry with pigment to match colour of tile ,laid over screed bed or bedding layer, compressive strength not less than 250 kg /sqcm complete all as specified and directed. Note :Screed bed /bedding laying shall be measured and paid separately .

M & L for PCC 1:4:8 type D2 (40 mm graded aggregate ) as in sub base to flooring 75 mm thick complete all as specified and directed.

M & L for PCC 1:2:4 type B1( 20 mm graded aggregate ) as in hard standing /paths etc complete 100 mm thick finished even & smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering on brick masonry or concrete surface, in CM 1:6 including finished the surface smooth and even W/o using extra cement complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness m-35 Grade with grey cement and no pigment laid over 50mm thick and cushioning complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness below or above ground complete all as specified and directed.

Plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in benching, water troughs and the like including form work and finishing all exposed surfaces of concrete, complete all as specified directed.

Supply only PVC Coated galvanised mild steel chain link fencing made out of 3.15mm dia galvanised steel wire and of aperture 50mm x 50mm complete all as specified and directed. Note : (a )Fixing shall be measured and paid separately. (b) After pvc coating the dia of wire shall be 4.60 mm

Fixing only mild steel chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts , angles etc., including provision of binding wire complete all as specified and directed.

M & L for mild steel screw bolts (machine made) with hexagonal or square heads at one head and screwed at the other, screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long with da of bolt upto 10mm complete as specified and directed.

M & L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m width and not exceeding 1.5m depth and getting out in soft /loose soil complete all as specified and directed.

Removing excavated soil to a distance exc 250 m and not exc. 50m and depositing where directed at a level not exc.1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Plain cement concrete (1:3:6) type C2 using 40mm graded granite/trap stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Applying three coats of white washing on newly plastered surface of wall including preparation of surface complete all as specified and directed.

SWIFTTECH ENGINEERS INDIA PVT LIMITED

M/SJAYAM CONSTRUCTIONS

KS CONSTRUCTIONS

G.L.THIRUMALAI NAIDU AND COMPANY

SIRITEL SYSTEMS PRIVATE LIMITED