REPAIR MAINTENANCE OF PLATES, ROOF SHEETS, ANGLE IRON OF CONNECTING BRIDGES AT CERTAIN PLACES AND CONNECTED ITEMS AT AREA-II UNDER AGE B/R (CENTRAL) OF GE (WEST) COLABA, MUMBAI

Demolition of brickwork or stone boulders masonry built in CM incl all quins, arches, pillers etc, complete all as specified and directed.

M&L for brick work with Sub class 'B' brick, straight or curved on plan exc 6M mean radius built in CM (1:6), complete all as specified and directed.

M&L for brick work with Sub class 'B' brick, straight or curved on plan exc 6M mean radius built in CM (1:4), complete all as specified and directed.

M&L for brick work with Sub class 'B' brick, straight or curved in plan of any redius in half brick thick wall built in CM (1:4), complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry with solid blocks type C-1 (1:3:6) (20 mm graded aggregate) exc. 10 cm in width and setting in mortar (1:6), complete all as specified and directed by engr in charge.

M & L for Pre-cast cement concrete block masonry with solid blocks type C-1 (1:3:6) (20 mm graded aggregate) exc. 10 cm in width and setting in mortar (1:4), complete all as specified and directed by engr in charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick wall or stone surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces through authorized applicator only including use of scaffoldings bldgs, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces through authorized applicator only including use of scaffoldings bldgs, complete all as specified and directed.

S &F Providing precast cement concrete Type B-1 1:2:4 (20 mm graded agg) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete with joints to match, complete all as specified and directed.

M & L for Providing, cement concrete 1:2:4 type B-0, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately), complete all as specified and directed by Engr in charge.

S & F for Providing precast cement concrete Type B-0 1:2:4 (12.50 mm agg) set in CM 1:4 louvres and jallies, 25mm thick (measured solid), including all mouldings and frame, complete all as specified and directed by Engr in Charge.

Demolition of Concrete of any description and in any position not otherwise, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling roof (corrugated, semi corrugated etc) sheets in roof coverings or in view cutter including ridges, complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface, complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors, complete all as specified and directed.

S&F for Rolled mild steel sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates, complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Dismantling fencing wire mess any type any description, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire, complete all as specified and directed.

Supply only chain link mild steel galvanized fencing, any type or size, complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

S&F in repair Galvanised, concertina coil of 610 mm dia made of 0.5 mm thick 19 mm wide strip and 2.59 mm dia high tensile wire 125 Nos of clips having 50 Nos of circle and covering 6 running mtr and 5 clips per spiral using a cerntar core of high tensile wire around which a tape of rezor sharp barbes machine crimped etc all as approved, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in plinth protection & similar work including necessary expansion joint filling with bitumen at a certain distance, complete all as specified and directed.

M&L Preparing old painted brick or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of floor coat emulsion paint complete all as specified and directed.

M&L Preparing New plaster, brick or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of floor coat emulsion paint over a coat priming paints plaster, complete all as specified and directed.

Material & Labour in repair for stainless steel (Grade 304) railing, newal post, ends, caps and balustars etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engr in Charge.

Material and Labour in Repair for glazed ceramic exterior wall tiles 6 to 8 mm thick not exceeding 0.36 sqm etc set & jointed in cement and pointed in coloured cement to match the shade of tile over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.

Material and Labour in repair for Granite stone best quality (of any type) 18 to 20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

Providing edge moulding to 18-20mm thick Granite stone (any description) of counters vanities etc. including machine polishing to edge to give high gloss finish etc., complete all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floor & pavings n.exc 15 cm thickness (below or above GL) and removing debries out side MOD land, complete all as specified and directed.

M&L for M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in hard standing, complete all as specified & directed by Engineer-in-charge.

Material and Labour and fixed in repair for heavy duty outdoor vitrified tiles dark or light shade 10-12 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.16 sqm and not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

Supply & Fixed in repair PVC tensile fabric structure with PVDF (polyvinyl-idene-fluoride) Coating with all necessary fixtures, of any size and shapef or making canopies, shade etc fixed with mild steel structural frame work, weight of the fabric is considered, with fabrics ranging from 900 GSM, complete all as specified and directed. Note :- (i) The shape / Design of the shads will be as approved By GE.

S&F in repair Chequered cement concrete tiles 20cm x 20cm x 25mm thick fixed on CM 1:6 bedding layer of 15 mm thick with grey pigment, complete all as specified and directed.

M&L and fixed in repair Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning, complete all as specified & directed by Engineer-in-charge.

Material and labour in repair for Factory made CI Manhole cover, heavy duty, single seal comforming to Fe-150 IS-210-1978 icluding 2 sets of manhole cover lifting and unlocking key to suit each other type manhole cover exc 5 kg each(sample as approved by GE), complete all as specified and directed.

Material and labour for 12 mm thick Ready Mix Plaster in single layer on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth, complete all as specified and directed by Engr-in-Charge.

Material and Labour for applying one coat of wall putty 1 mm Average thickness on wall surface incl rubbing through authorised applicators, complete all as specified and directed.

Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed.

Material and Labour for complete removal of existing treatment of old surface of wall and applying two coats of oil emulsion distemper through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed.

Tanking down old cupboard shutter or vanity shutter incl all fitting, complete all as specified and directed.

S&F 18 mm thick Both Side pre laminated HDHMR Board of any colour, Matt surface finish, grade I as per IS 14587, for frame and shutter with 18 mm wide PVC strrips lipping for kitchen cabinets, complete all as specified and directed by Engr-in-charge.

S & F of round stainless steel cabinet/drawers handlers dia of 27mm, complete all as specified and directed.

S & F of medium weight, cold rolled mildsteel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.50mm, self-closing, complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description n. exc 1 sqm each, complete all as specified and directed.

Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each, complete all as specified and directed.

Refixing shutters of any description not exceeding 1 Sqm each in the same opening, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws, complete all as specified and directed. Note:- Old shutter received from item No. 52 shall be reused.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws, complete all as specified and directed. Note:- Old shutter received from item No. 53 shall be reused.

M&L for 40 mm thick PCC type B-1, 1:2:4 (20 mm graded stone aggregate) as in levlling course, complete all as specified and directed.

Dismantling, floor hearth or wall tiling/wooden flooring inclduing cement mortar bedding and removing rubbish, complete all as specified and directed.

Dismantling, stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

Material and Labour for first and premium quality of vetrified coloured marble finished digital tiles 1200 mm x 600 mm x 8 to 10 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.

Material and Labour for first and premium quality of vetrified coloured marble finished digital tiles size 600 x 1200 x 8 to 10 mm thick polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick (bull nosing with three antiskid grooved) in one pice over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 20 mm thick in (1:6) for laying floor finishes, complete all as specified and directed.

Material and Labour for first and premium quality of non skid, joint free ceramic “coloured” tiles of size 300 x 300 x 6-7 mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

Material and Labour for first and premium quality of non skid, ceramic “coloured” tiles of size 300 x 300 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.

Material and Labour for first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm x 8 to 9 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.

Material and Labour for Vitrified double charge tiles any shade size 600 x 600 x 8-10 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

Material and Labour for Vitrified double charge tiles any shade size 600 x 600 x 8-10 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.

Material and Labour for HD Ceramic tiles any shade size 600 x 600 x 8-10 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

Material and Labour for HD Ceramic tiles any shade size 600 x 600 x 8-10 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.

M&L 8mm thick laminate wooden flooring, water resistant, termite resistant, polished flooring in a flating glue less click locked & sealed flooring similar to a jigsaw puzzle In this method, the individual planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installed, complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets, complete all as specified and directed.

Supply and fixing for 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work, complete all as specified and directed : sample as approved by GE.

Supply and fixing for 6 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work, complete all as specified and directed : sample as approved by GE.

M & L Decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed by Engr in charge.

Supply and fixing for 1 to 2 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instruction to plywood work, complete all as specified and directed : sample as approved by GE.

Supply and fixing for Plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm, complete all as specified and directed. sample as approved by GE.

Material and Labour for French polishing on new wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE.

Material and Labour for French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE.

Supply & Fixed in repair 0.5 to 1 mm thickness 3D acrylic washable wall papers fixed with adhsive as per manufacture instruction as in ceiling/coloumns and in vertical surface, complete all as specified and directed approved sample as kept in GE Office.

Supply & Fixed in repair 12 mm thickness fluted WPC indoor panel fixed with necessary aluminium tube of size 25mm x 38mm x 1.50mm thick with required silicon & screw as in ceiling/coloumns and in vertical surface, complete all as specified and directed approved sample as kept in GE Office.

Supply and fixing in repair 10 to 12 mm thick Toughned glass as in door shutters, plateform partition including necessary cutting to shape, drilling holes as reqd, jointing cleats, glazing clips, ruber neoprene packing, Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws, complete all as specified and directed.

S & F frosted film / sunfilm / logo in any type or design and size, complete all as specified and directed.

M &L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately), complete all as specified and directed.

M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

Material and Labour for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B-0 / Cement mortar 1:3, complete all as specified and directed with following :- (a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm. (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners. (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE.

M& L lnsulated PVC Wall Lining without PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick wood grain printed single side prelaminated PVC sheet duly fitted into the wall as per specifications and drawing, complete all as specified and directed by Engr in charge.

Supply and fixing for Solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed. Make : Rajshree/ Navratan or equivalent, sample as approved by GE.

S&F for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame, complete all as specified and directed.

S & F PVC ceiling wihtout insulation panelsk with EPS stuck to 1mm Printred PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing, complete all as specified and directed.

M & L for Anodised aluminium snap grid frame work for false ceiling / POP Ceiling, complete all as specified and directed by Engr-in-charge.