Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹10.9 L
EMD Value
₹21,800
Closing Date
30 Sept 2020, 4:00 pmClosed
Executive Engineer PWD
Executive Engineer PWD
Repair/Renovation of Tehsil Office Complex at Mandi.
2020_PWDJK_104928_1
e-NIT No. 45/2020-21 dated 21-09-2020
Open Tender
Civil Works
Item Rate
60 days
Poonch
Please refer Tender documents.
3 documents required · 3 mandatory
₹600
Yes
Executive Engineer PWD Poonch
₹21,800
Yes
10 Oct 2020
21 Sept 2020
1 Oct 2020
21 Sept 2020
30 Sept 2020
21 Sept 2020
Amount
Dismentaling wooden boardings in lining of walls and partations,excluding supporting members but including stacking within 50 metres lead:Thickness above 25mm upto 40mm
Dismantling old plaster or skirating,raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering .All work up to plinth level with : 1:3:6 with ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) using 20% stones. including all leads /lifts ,carriage, handling and re-handaling ( Complete job)
Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separately,all complete as per direction of Engineer-in-charge.(Note:-Butt hinges and necessary screws shall be paid separately). First Class Kail - Wood .
Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture1.4 mm in both directions with wire of dia 0.63 mm for doors , windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished butt hinges of req. size with necessary screws as per direction of Engineer-in-charge. First class Kail wood
Providing and fixing glazed shutters 35 mm thick for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges finished of required size with necessary screws.First class Kail wood.
15mm cement plaster on the rough side of single or half wall of mix 1:6 (1 cement : 6 coarse sand ) .
Providing and fixing of high glass Cermaic glazed tiles in walls including highlighter of different sizes complete job.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622) of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), including grouting the joints with white cement and matching pigment etc. complete size of tile 600x600mm
Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufactures) of 1st quality conforming to IS:15622 of approved make,laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc.,complete. In colour such as White,Ivory,Grey,Fume Red Brown
Providing and fixing of 12mm thick marine/water proof ply for ceiling including cutting hosting and fixing position and painting with primer and enamel paint.
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufactures, specifications:Two or more coats applied @ 1.25 litre 10sqm over and including one coat of special primer applied @0.75 litre/10sqm .
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liitre/10sqm over and including Priming coat of exterior primer applied @ 2.20 kgG/10 sqm)
Providing and Fixing of PVC Laminates for PVC panelling of approved quality and make including cutting,hoisting & fixing in poistion etc including all necessary fixing accessories etc all complete job for walls & ceiling
For Walls
For Ceiling
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade,one or more coats
Providing and fixing hardware anodised aluminium fittings including screwes complete
Tower bolt 150 x 10 mm
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screw etc complete
Arm strong accoustical ceiling fine fisuedtegular 240mm grid including all material complete job
Ms Abdul Aziz Mir
ZAFFAR AHMED
ABDUL RASHID
ABDUL RASHID
Mohammad Aslam
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .