SPL REPAIR OF P-2/4 AND P-3/5 OF TX AREA MD ACCN AND SPL REPAIR OF VINTAGE SEWAGE LINE OF OTM ACCN AT 2 ARMY HQ SIG REGT UNDER GE (U) MEERUT CANTT.

Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.

Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.

M&L for rendering in cement mortar (1:6), 10mm thick on other than fair faces of brick work masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:4) mixed with liquid water proofing compound @ 200 ml per 50 Kg weight of cement on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately as supply only.

M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on brick masonary wall surfaces complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 8 to 10mm thick area of each tile exceeding 0.42 Sqm but not exc 01 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

M&L TMT bars of 6 to 8mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

M&L for 18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Rounding to edges of stone slab one edge, such as steps, window cill stone, cooking platform, and other similar situations and rubbing and polishing complete

S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. Note: The rates include for one shop coat of priming and filling hollow portion of frame

S&F Second class HW, plain, solid, straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed.

S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as per specified and directed.

with PCC 1:3:6.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed.

S&F aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium powder coated snap beading, screws, aluminium (powder coated) fittings such as handle clips (suitable size), locking device, and glazing in panels with 3.5mm thick coloured/tinted glass and gauged with 0.38mm dia, 1.40mm aperture SS wire mesh using Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified with fixing of iron grill 12mm square bar directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed.

S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed.

S & F in repairs 100 mm long dual leg door stopper of alumunium alloy body fixing on door, complete all as specified.

S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed.

S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms)

S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as sped & directed.

S&F in repairs Vitreous china wash basin white flat back size 580x 450mm including ,pedastal type waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted pleases.

Taking down of existing unserviceable wash down water closet with seat cover and S&F Vitreous China white wash down water closet ( padestal pattern) , including fixing bolts, plastic closet seat, black, closed pattern with recessed bottom and cover and mild steel CP hinging device, including connection to drain pipe, and to flushing pipe and antisyphonic pipe etc. complete all as specified and directed

Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep and getting out in soft loose soil complete all as specified and directed.

Returning and filling in approved earth including levelling spreading watering and well ramming in any layers n. exc 25cm thick complete all as specified and directed.

Removing excavated materials n. exc 100m and depositing where directed and complete all as specified and directed.

S&F in repair new rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of primer and 1mm thick wall putty, complete all as specified and directed.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M&L for applying on newly plastered surfaces two coats of weather coat damp proof over applying 1 mm thick Wall care white ( Putty) over a coat of alkaline resisant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

S&F Mild Steel work in tubular trusess incl special shape washer etc. confirming to IS 1161-1998 grade St- 240 complete all as specified and directed.

M&L for complete removal of existing treatment and preparation to old plastered surface of wall and apply two coats of oil bound distemper over a coat of primer and primer and 1mm thick wall putty, complete all as specified and directed.

M&L for Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mm dia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Go

drej or equivalent approved by Engr-in-Charge”

S&F in repair Sink mixer with regular swinging spout (wall mounted model ) with connecting legs & wall flanges) for 15 mm bore, fixed in repairs, complete all as specified and as directed.

M&L PCC 1:4:8 type D-2, with 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

M&L for burnt clay brick sub Class 'B' work ( old size) straight or curved in plan exc 6 m mean radius, built in CM 1:6 incl soakage well and septic tank Comlete all as specified and directed

Do as per above item but except brick complete all as specified and directed.

Per 1000 Nos

S&F stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed.

Demolition and breaking up 150mm dia drain pipes (salt glazed stone ware) set in cement mortar including concrete bed & haunching where required and removing away as directed and specified.

M&L for 150mm dia in bore HDPE DWC pipes laid in trenches and concrete bed to pipes of 150mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested cement concrete 1:4:8 type D-2 complete all specified and directed

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as in sub base of tiles all as specified and directed.

M&L for sand filling under floors including watering & consolidation concrete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed.

M & L for precast cement concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate) in , cover slabs (for manholes etc.) or Complete all as specified engg-in-charge

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L for modular point wiring with 1.5 sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit of suitable size not less than 1.8 mm thick (ISI marked) with all accessories including suitable modular plate ( inner + outer) and sunken boxes of suitable sizes including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multistranded cable for continuous earth conductor connected to common earth dolly, complete all as specified & directed for the following:- Note:- 1. Proper colour coding is to be followed as per IS Specification. 2. Cutting chases for point wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item.

One light/Wall mount fan/ Ceiling fan ,bell/buzzer point controlled by one switch 6 Amp, SP, one way 240 volts.

One multi pin socket 6 Amp independent.

One multi pin socket 6 Amp on same board

Ditto, all as per item No 111 hereinbefore but using 2.5 sqmm (nominal area) multistranded copper conductor cable & 2.5 sqmm size PVC insulated FRLS and unsheathed copper conductor cable FRLS for earth continuity ( green colour) for one 3 pin socket outlet 15Amp multi purpose independent point controlled by 16 Amp, switch, complete all as specified and directed.

Ditto, all as per item No 111 hereinbefore but using 4 sqmm (nominal area) multistranded copper conductor cable & 4 sqmm size PVC insulated FRLS and unsheathed copper conductor cable FRLS for earth continuity ( green colour) for one 3 pin socket outlet 15Amp multi purpose independent point controlled by 16 Amp, switch, SP, one way, 240 Volts for Geyser & AC Point complete all as specified and as directed.

Supply, fixing, stringing and drawing submain wiring with 2 run of single core, 6 sqmm PVC insulated and unsheathed, multi stranded copper conductor cable FRLS using colour code for phase red and neutral black with and including 6 sqmm PVC insulated and unsheathed FRLS conductor multi stranded cable in green colou connected to common earth point and connected to earth dolly drawn through PVC rigid conduit of suitable size, heavy grade (ISI marked) with and including all accessories, fixed to surface / recessed complete all as specified and directed. Note:- 1. Proper colour coding is to be followed as per IS Specification. 2.Two runs of single core cable with one run of earth cable of conduit shall be measured as one RM. 3. Cutting chases for submain wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item.

S&F Modular switch 1 way 6A,1 module single, ( ISI marked) complete all as specified and directed.

S&F Modular Bell push 6A,2 module single, ( ISI marked) complete all as specified and directed.

S&F Modular switch 16A,1 module single, ( ISI marked) complete all as specified and directed.

M&L for Modular socket 16A , 240 volts 2/3 pin 2 Module all as specified and directed.

S & F Socket, 6A - 2/3 pin combined 2 module, (ISI marked) complete all as specified and directed. .

S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI(Marked) all as specified and directed.

S&F Bell, Ding Dong AC. 230 volts, single pole complete all as specified and directed

S&F for Modular Fan step regulator 120W , 240 volts 2 Module all as specified and directed.

Supply and fixing in repair of Bulb holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in repair 20 watts Light emitting Diode (LED) opal diffuser tube light fitting wall mounting , indoor decorative PC LED Batten cover ensures soft and glare free lightening T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install, Efficacy:100 lumen/watt, Minimum 3.5 KV Voltage Serge Protection, IP 20, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S&F in repair 10 watts Light emitting Diode (LED) opal diffuser tube light fitting wall mounting , indoor decorative PC LED Batten cover ensures soft and glare free lightening T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 2' long, easy to install, Efficacy:100 lumen/watt, Minimum 3.5 KV Voltage Serge Protection , IP 20, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

M & L in repair LED Bulb 12 watt 240 volt complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep with, blades, and frame and louvers

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm sweep heavy duty with, blades, and frame and louvers.

Supply & Fix in repair sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 A 240 Volts

S & F in repair High performance IP66 LED Streetlight 25 watt, with system efficiency of 125 lm/w housing made of die-cast aluminium, with street optic lens,with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 25W LED light with sustem efficiecy 125lm/w etc. drawn through and including 32mm bore GI light grade protecion pipe upto 1.0m length with

suitable fixing accessories on walls, complete all as specified and as directed.

Taking down of old U/S MCB SP 6 to 32 AMPs and Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 6 To 32 AMP

Taking down of old U/S MCB SPN 32 AMPs and Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. (I) SPN 32 AMP

Supply & fixing in repair Sheet Metal Enclosures vertical TPN distribution board with provision for & including 63 Amp MCCB 4 pole 16 KA as incomer with necessary internal wiring, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall all as specified & directed including taking out old u/s DBs any capacity .

Taking down of old U/S MCB DB of 12 way and Supply & fixing in repair MCB DB Box 12 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed

Taking down of old u/s earthing and M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all as as pecified .

Supply, laying and testing of XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade, cross sectional area 25 sqmm 3.5 core complete all as specified and directed.(Notes:- Excavation earth work sand cushioning PCC covers shall be measured and paid separately)