Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-AOC TIORKHALI MAHESHGANJ NADIA | NADIA | NADIA | WEST BENGAL | 790804 | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹47.2 L+₹5.7 L (13.6%)Rejected-Finance 63 47 49 1ST FLOOR BAKRAHAT ROAD THAKURPUKUR KOLKATA 700063 | KOLKATA | WEST BENGAL | 700063 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹50.5 L+₹9.0 L (21.7%)Rejected-Finance PO CHANDL PS BISHNUPUR DIST SOUTH 24 PGS PIN 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹51.2 L+₹9.6 L (23.1%)Rejected-Finance BHANGARMATH THAKURANI CHAWK PO SAMABYPALLY BALLY HOWRAH 711 205 WEST BENGAL | HOWRAH | WEST BENGAL | 711205 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹52.9 L+₹11.3 L (27.2%)Rejected-Finance 17 1A BALLYGUNGE CIRCULAR ROAD KOLKATA 700 019 | KOLKATA | WEST BENGAL | 700019 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
24 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
COMPREHENSIVE REPAIR/ MAINT TO HQ COMD OTM BLDGS INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA.
2023_MES_605350_1
8141/E8
Open Tender
Civil Works
Item Rate
210 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹80,000
24 Aug 2023
23 Jun 2023
25 Jul 2023
23 Jun 2023
24 Jul 2023
17 Jul 2023
Amount
Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not other wise provided for, complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings, complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including roof coverings, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.
Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as specified and directed.
Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.
Taking down shutters of any description area exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.
Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs, beams, columns, lintel, chajja, fins, facia etc. of 50 mm average thickness (Any storey/ height of building/ structure) including tapering all edges, making square shoulders of cavities by air or sand blasting etc and cleaning of exposed concrete surface and reinforcement bars, lightly picking materials by air blasting or sand blasting including removal of foreign materials, loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed. (NOTE: Measurement shall be considered for the surface area of RCC member)
M&L for applying chloride free rust removing chemical on rusting steel reinforcement bar as per manufacturer's specification and removing all rust from steel reinforcement bar by wire brush & sand/emery paper (after 24 hours of application of rust remover) and cleaning the area thoroughly by water with the help of pressure jet and allowing it to dry and making the reinforcement bar totally rust free (for any storey/ height of building/ structure) complete all as specified and as directed. (Make of Rust removing chemical :- Reebaklens RR of FOSROC or equivalent product other makes specified in tender) (NOTE: Surface area of cleaned steel reinforcement shall be measured for payment)
M&L for introducing new mild steel TMT reinforcement bars for structural connection in RCC beams, columns, lintel and slabs (for any storey/ height of building/ structure) including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and up to 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges, plastic nozzles etc as per manufacturer's instructions etc all as specified and directed. (Make of epoxy chemical : Lockfix E75 of FOSROC / Hilti HY 150 or equivalent product other makes specified in tender) (NOTE: Reinforcement bars shall be paid separately)
M&L for preparation of old existing corroded and new introduced reinforcement surface (at any storey/ height of building/ structure) by brush and application of two component epoxy based zinc rich primer, of minimum specific gravity 1.75, adhesive bond strength with steel as 1.50N/mm2, as a protective coating to steel reinforcement bars in concrete with total zinc content in dry film >90% by volume and DFT per coat >50 microns complete all as specified and directed. (Make- Nitozinc primer of FOSROC or equivalent product in other makes specified in tender) (NOTE: Surface area of steel reinforcement shall be measured for payment)
M&L for applying a coat of epoxy bonding agent on existing concrete surfaces, with mixed density 1.48 Kg/litre and adhesive bond strength>2.50 MPs, mixed and applied as per manufacturer's specifications complete all as specified and directed. (Make- Nitobond EP of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
M&L for applying shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar, as per manufacturers instructions to get a compressive strength of 35 MPA after 28 days, finishing surfaces even and smooth complete all as specified and directed. (Make- Rendroc SP 40 of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
Supply and application cementitious grouting admixture with the cement slurry at a dosage 225 ml per bag of cement and injecting with high pressure by a pressure grouting pump through non return PVC nozzles prefix with rapid setting cementitious plugging mortar to fill all possible pores and gaps left within the old concrete mass. When the flow of grout stops or shows refusal or grout flows out from the adjacent nozzle, pumping to be stopped and the nozzle to be tied up and allowed to set for 24 hours. The PVC nozzles to be sealed off with quick-setting cementitious plugging mortar. Grouting operation to be carried out through next nozzle till the entire area is covered. The grouting holes to be finished by removing the protruded portion of nozzles and finishing flush with the surface, complete in any storey/height of building/structure, as per manufacturer's instruction as specified and as directed. Make : (Grouting admixture) :- Cebex 100 of FOSROC or equivalents solutions SIKKA/STP as approved by GE. Note : The work should be carried out by Manufacturer authorised representative only.
M&L for grouting of voids/cracks with high strength epoxy resin grout as per manufacturers instructions complete all as specified and directed. (Make: Conbexta EP 10 of FOSROC or equivalent product in other makes specified in tender) (NOTE: The item shall be executed if any voids/cracks are found during execution/removing of concrete mortar from the surface).
M&L for cleaning of roofs by getting out growing vegetations / grass & brooming down with removing it out of MD land premises of including repairing to damaged surface of roof by applying two coats of tartaric acid over two coats of CM (1:3) with mixed with 3% WPC & sealed with 85/25 hot blown grade bitumen complete in patch not exceeding 2.0 Sqm each including necessary form work, complete all as directed by Engineer in Charge.
M&L for repairing of damaged portion of mouth at terrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as directed by Engineer in Charge.
M& L for repair to chajjas area exc 2 Sqm and n exc 4 sqm each including dismantling of upward facia, cutting of reinforcement , plaster 1:3 / PCC type B-0 (using 12.50mm stone aggregate) on top with WPC, benching/haunching, repair to broken plaster with dubbing coat including necessary form work complete all as directed.
M& L for repair to chajjas area exc 1 Sqm and n exc 2 sqm each including dismantling of upward facia, cutting of reinforcement , plaster 1:3 or PCC type B-0 1:2:4 (using 12.5 mm stone aggregate) on top with WPC, benching/haunching, repair to broken plaster with dubbing coat including necessary form work complete all as directed.
M&L for providing and injecting chemical emulsion for post constructional anti-termite treatment along wall using chemical emulsion one litre per hole at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 to match the existing, all as per manufacturer instruction etc complete all as specified and directed. (Note : The process shall be carried out Manufacturer rep only)
M&L for brick work with fly ash brick straight or curved on plan exc 6.0 mtr mean radius built in 1:6 cement mortar complete all as directed.
M&L for brick work with fly ash brick straight or curved on plan to any radius in half bricks thick walls, built in 1:4 cement mortar complete all as directed.
M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
M&L for dubbing out cement plaster (1:4), average 10 mm thick on irregular faces of walls (when specially ordered in writing) complete all as a specified and as directed
M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1:6, finished fair & even & smooth without using extra cement, all as specified and directed.
M&L rendering 10 mm thick on fair faces of brick work/ concrete on ceiling surfaces in CM 1:3, finished fair & even & smooth without using extra cement.
M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1:4, using water proofing compound, finished fair & even & smooth without using extra cement. complete all as specified and directed. (Note: WPC shall be measured and paid separately).
Supply only liquid water proofing compound of Make 2K, Pidilite or equivalent, all as specified and directed.
Cutting holes in brick walls in cement mortar for inserting holdfast or pipes and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but not exc one brick, etc complete all as specified and directed.
S&F for Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, and for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., all as specified.
M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Gde Fe-410-W (Gde-E 250) quality-B complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L welded steel wire fabric, weight n exc 4 kg per square meter complete , fixed to steel members, all as specified and directed.
S&F Mild steel wind ties for roof including securing bolts, posts including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
M&L for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F in repairs 0.80mm thick plain galvanised mild steel sheeting, as in, hips, valley gutters, drip and straight flashings (length and girth as fixed) for hangars etc complete including dismantling existing sheets all as specified and directed.
S&F of wind driven turbine ventilator (Mill finish) powder coated hurricane 600 with FRP base to match roofing sheet and variable angle elbow with and including flashing sheet fixed with self tapping screws etc complete all as directed Make : SVS or Equivalent as approved by GE
M&L for PCC (1:5:10) type E-2, by using 40 mm graded stone aggregate as in foundations, fillings and mass-concrete, complete all as specified and directed.
M&L cement concrete type C2 (1:3:6) using 40 mm graded stone aggregate, 75 mm thick as in plinth protection, laid in alternate bays, finished even and smooth without using extra cement, complete all as specified and directed.
M&L 25mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded aggregate) as in sub base for floor. complete all as specified and directed.
M&L for providing two coat of master seal 550 or equivalent to prevent leakage/seepage through sunken floor over prepared surfaces complete all as specified and directed.
M&L polythene film, black 150 micron laid in floors, all as specified and directed.
M&L for heavy duty coloured ceramic floor / paving tiles of size 300 x300x 10 mm thick in floor etc set and jointed in near cement slurry and pointed in white or coloured cement to match the shade complete including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make : Johnson model Endura or equivalent model in other approved makes.
M&L for granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.
Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc including machine polishing to edge to give high gloss finish etc complete all as directed.
S&F Vitrified coloured (light shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.
All as per item No.53 here-in-before, but as in skirting on vertical surfaces, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed..
M&L Vitrified ceramic coloured (dark shade) tiles, double charged, 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 Sqm but not exc 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, laid over and incl screed bed 20mm thick cement mortar 1:4 complete all as a specified and as directed
All as per item No.55 here-in-before, but as in skirting on vertical surfaces, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed..
M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 350x250x 7mm / 450x 300 x 7 mm / 600x300x7mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
M&L mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and directed.
M&L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.
M&L for factory made Second class hardwood glazed and Skelton shutters 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats, all as specified and as directed.
S&F 35 mm thick factory made plain framed, panelled shutter (two panel) 2nd class HW rail and style with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35 mm thick , 2nd class HW, plain framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.
Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for Providing and fixing factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
S&F factory made single extruded WPC (Wood polymer composite) solid door/ window / ceosetory windows & other frames/chowkats of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).
All as per item No.66 above, but of frame size 65x100mm
M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face supplying and fixing in the frame at site as per specification & drawing .
Supplying and installing curved/arch uPVC- Fixed windows made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 52mm x 33mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted, Complete all as specified and directed.
Supplying and installing rectangular uPVC- Fixed windows made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 52mm x 33mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted, complete all as specified and directed.
(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles having a worldwide presence with a GREENLINE mark having three tracks and three sashes (shutters) with frame dimension of 104mm x 49mm and sash dimension of 61mm x 47mm x 37mm each with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted, Complete all as specified and directed.
(Note: The unit rate quoted by contractor excludes cost of glass and powder coated aluminium grill and includes all other connected accessories. Net opening will be measured for payment purpose. Glass and powder coated aluminium grill will be measured and paid separately under respective items)
Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles having a worldwide presence with a GREENLINE mark having two tracks and two sashes (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm.The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery in Ist quality (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted, complete all as specified and directed.
(Note: The unit rate quoted by contractor excludes cost of glass and powder coated aluminium grill and includes all other connected accessories. Net opening will be measured for payment purpose. Glass and powder coated aluminium grill will be measured and paid separately under respective items)
Supplying and installing rectangular uPVC louver windows with bottom fixed made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 36mm for windows with aluminium powder coated framework and glass blades for louvers with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted, Complete all as specified and directed.
(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
Supplying and installing uPVC- 1 sash casement door made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 69mm x 50mm and sash 58mm x 93 x 54mm with corners fusion welded, fully reinforced with Galvanized steel of 1.5mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015, complete all as specified and directed.
S&F stainless steel hinges of 100 mm size, complete all as specified and directed. Make: Prayag, Cat No HG2414 or equivalent model in other approved makes.
S&F stainless steel handle of size 200mm, complete all as specified and directed. Make: Prayag, Cat No.DHL2200 or equivalent model in other approved makes.
S&F stainless steel tower bolt of size 200mm, complete all as specified and directed. Make: Prayag, Cat No.TBR 2200 or equivalent model in other approved makes.
S&F stainless steel Aldrop bolt of size 300mm, complete all as specified and directed. Make: Prayag, Cat No.LD 1212 or equivalent model in other approved makes.
S&F Butt Hinges medium weight cold rolled stainless steel 100mm long complete all as specified.
S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed.
S&F Aluminium anodised bow handle fabricated type extruded section of 150mm long complete all as directed
S&F Aluminium anodised bow handle fabricated type extruded section of 125mm long complete all as directed
S&F Aluminium anodised sliding door bolts of 250mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F Aluminium anodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repairs 150mm extruded brass handles, cast type, polished bright complete all as specified and as directed.
S&F in repairs 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.
S&F in repairs 300 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.
S&F in repairs 250 mm long brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fining bolt with rolled or drawn brass bolts complete all as specified and as directed.
S&F in repair powder coated Z type aluminium handle suitable for aluminium windows, all as directed
Taking down aluminium frame with shutters of any description nexc 1.50 sqm each, complete all as specified.
Taking down aluminium frame with shutters of any description exc 1.50 but n.exc 2.0 sqm each, complete all as specified.
Taking down aluminium shutters of any description exc 1.0 but n.exc 2.0 sqm each, complete all as specified.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified.
S&F anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21 100 mm long (2 No) suitable handles etc. complete all as specified.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21 100 mm long (2 No) suitable handles etc. complete all as specified.
S&F in repairs anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge.
Supply and fixed in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.
Supply and fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheed foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F in repair 150 mm over all length of cover plate of floor door stopper of Brass body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed.
M&L for repair to steel window/door/gate including necessary welding, riveting, Easing, drilling, greasing. Taking down, replacement of unserviceable hinging device, handles, making them in serviceable condition and re-fixing in same opening, complete all as specified and directed.
Taking down easing and adjusting aluminium shutters/partitions including rubber neoprene packing complete of any description n.exc 1 sqm each and refixing in same opening, all as specified and as directed. Note:- Replacement of door closer, glass, lock, handle, tower bolt etc shall be measured and paid separately.
All as per items 105 here-in-before, but exc 1 sqm and n.exc 2 sqm each refixing in same opening.
Hacking out old broken glass (any thickness size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones., all as specified and as directed.
M&L for sheet glass 3mm thick figured glass pin head type and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified and as directed.
M&L for sheet glass 4.80mm thick ordinary quality obscured or frosted on one side and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.
M&L solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed.
M&L 5 mm thick Toughened glass as in hinged doors, partitions, windows, automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified.
M&L in repairs 12 mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, handles, fixing accessories as required, complete all as specified.
S&F in repairs Pre laminated 9 mm thick particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified.
Supply and fixing in repairs 19mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails. complete all as specified and as directed.
Supply and fixing in repairs 12mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails. complete all as specified and as directed.
M&L 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified.
Supply and fixing Mortice lock vertical type (chrome) 100mm, 6 levers as in repair complete all as specified and as directed. (Make : Godrej Model No- 8194 or equivalent model in other approved makes )
Supply and fixing Mortise lock (200 mm Ultra Mortice lock with Universal brass (2H) handle set) as in repair complete all as specified and as directed. (Make : Godrej Model No- 7660 or equivalent model in other approved makes)
S&F steel dead lock, 6 levers as in repair complete all as specified and directed.
S&F steel CY dead lock, 6 levers as in repair complete all as specified and directed.
S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified.
M&L for snap grid system with powder coated aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and powder coated aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with supporting hangar 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. (NOTE: Ceiling board shall be measured separately)
Re-fixing of aluminium snap grid system using serviceable grid sections and ceiling board obtained from taking down of false ceiling including hanging arrangements with supporting hangar 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. (NOTE: Ceiling board shall be measured separately)
S&F non asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling duly finished with two coats of oil bound distemper over a coat primer, complete all as specified.
M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) for any sunk or raised moulding to flat surface over metal frame work and reinforced with GI wire mesh with complete arrangements etc all as specified and directed.
S&F Suspended metal grid Ceiling System with mineral fibre acoustic tiles as per following specifications:- a) Ceiling Tiles:- Mineral fibre acoustic tile of 16mm thickness having sand textured finish with acoustical punchers, bevelled tegular edge and 8mm drop in module size of 600 x 600mm. Tiles shall have humidity resistance (RH) of 99%, NRC 0.50 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 33db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84.
b) Metal Grid:- The grid system shall be 15 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam". All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. The ceiling grid sections shall be fixed to ceiling with 6 mm dia GI hangers upto required length by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long, complete all as directed
MAKE OF CEILING GRID : ARMSTRONG, Model: SUPRAFINE 38 or equivalent in GYPROC / USG BORAL / UNISTEEL MAKE OF CEILING TILES: ARMSTRONG, Model: DUNE or equivalent item in GYPROC / USG BORAL / U TONE)
Taking up or down GI Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
S&F in repair 20 mm bore gun metal gate or globe valve, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 litres including dismantling of existing tanks, complete all as specified and directed. Make: Prayag Cat WT-3LL-10/Sintex/Supreme/Plasto.
All as per item No.134.00 above, but exc 1000 ltr & n.exc 2000 ltr of capacity.
S&F in repairs 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), complete all as specified and directed.
S&F in repair PVC internal kit for cascade type EWC with complete arrangements
M&L for seven stage cleaning and sterilization of inside the PVC/RCC water storage tanks capacity not exceeding 1000 ltr of any description and in any position comprising following seven stage cleaning and sterilization of water tanks through bacteriological treatment by using TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69 AND ULTRA VIOLET RAY complete all as specified and as directed. :-
(a). First Stage is to drain out the water by using exit valve or high capacity dewatering system. (b). Second stage is cleaning all the algae formation inside the tank by using TERBAC G10/ Inoxi-60/NB-69 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks. (c). Third stage is fresh water cleaning by high speed jet pump. (d). Fourth stage first bacteria screening is decertification by using TERBAC-G5/ Inohor-5/NB-10 a Govt Laboratory certified branded halogen compound. (e). Fifth stage is cleaning the floor of water tank by industrial vaccum cleaner. (f) . Sixth stage is the second bacteria screening and sterilizing method by using ultra violet ray within the tank and kills all suspended bacteria. (g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65/Inoxi-60/NB-69 .
NOTE:- (i) Test certificate of TERBAC-G65/ INOXIi-60/NB-69 from Government Laboratory mentioning suitability of sterilization should be submitted to the office before using for sterilization. (ii) Outlet pipe of OHT should be plugged before cleaning the OHT to avoid entering scale and the same shall be reconnected after cleaning the OHT and the quoted rate is deemed to include for this provision. (iii) Contractor will be responsible for rectification of complaints occurred during cleaning of tank i.e, no water in tank/over flow due to broken of float valve/blockage of outlet lines due to silt and rectification cost will be deemed to be included in quoted rate. (iv) Date of cleaning with location of site to be notify in sticker and fixed on tanks. (v) The work shall be carried out through specialized agency RAYS CLEANTECH/ INUS WATERTECH/ SATYA ENTERPRISE or other agency as approved by GE.
All as per item No.138.00 above, but exc 1000 ltr &n.exc 2000 ltr of capacity.
All as per item No.138.00 above, but exc 5000 ltr &n.exc 10000 ltr of capacity.
S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)
S&F vitreous china table top wash hand basin of size 420x420x135 mm (white) including all accessories etc., with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. Make: Jaquar Cat No.ARS-39901 or equivalent in Kohlar & Parryware.
S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)
S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )
S&F Vitreous china, white, full stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Make of Urinal : CERA, Model: CAPRIANA / HINDWARE, Model: FLAT BACK LARGE / Jaquar, Cat No: URS-WHT-13261, PARRYWARE, Model: NEW MAGNUM)
S&F PVC corrugated waste pipe, size 38/40 mm, 800 mm long for wash hand basins complete all as specified and directed. (Make: PRAYAG, Cat No: 328 or Equivalent make as approved by GE)
S&F in repair15mm bore heavy duty PVC connector pipe of length 450 mm with PTMT coupling at both ends, screwed down for pipe as directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON / CERA)
S&F in repair 600mm x 600 mm mirror with PVC frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. (Make: PRAYAG, Cat No: 553 or Equivalent model in other makes specified in CA)
S&F bathroom mirror of size 600x450x6mm, complete all as specified and directed. (Make: PRAYAG, Cat No: BLM-01F or Equivalent model in other makes specified in CA)
S&F bathroom mirror of size 900x600x6mm, complete all as specified and directed. (Make: PRAYAG, Cat No: BLM-03F or Equivalent model in other makes specified in CA)
S&F in repairs 15mm dia soap dish, chromium plated body complete all as specified and directed. (Make : PRAYAG, Cat No: BA-05 / CERA, Cat No: F5003106 / ESS ESS, Cat No : AC-503B / PARRYWARE, Cat No: T6902A1)
S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : ACN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003 / PARRYWARE, Cat No: T6514A1)
S&F in repair Chromium plated brass Angular stop cock (premium quality), concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4807A1 / JAQUAR, Cat No: FUS-29053 / CERA, Cat No: F1015361 / ASIAN PAINTS, ALAC101 / HINDWARE, Cat No: F360006 / PRAYAG, Cat No: 9010)
S&F 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as approved by GE)
S&F corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1/ CERA, Cat No: F5005102/ PRAYAG, Cat No: BEA-44)
S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030301 / HINDWARE, Cat No: F160002)
S&F stainless steel grating of size 102 mm dia with waste hole, complete all as specified and directed. (Make : PRAYAG, Cat No: FT-04 or equivalent in other makes specified in tender)
S&F in repair 15mm bore chromium plated two way bib cock with flange (premium quality), fancy type complete all as specified and as directed. (Make : JAQUAR, Cat No: FUS-29041 / CERA, Cat No: F1015163/ ASIAN PAINTS, Cat No: ALBC102 / PRAYAG, Cat No: 9311-N/HINDWARE, CAT No: F360005 or equivalent model in PARRYWARE, Cat No: G4834A1)
S&F in repair vitreous china, wall hung coupled closet, white including vitreous china valveless symphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. (Make : CERA, Model : CLAIR / PARRYWARE, Model: CASCADE NXT / HINDWARE, Model: CONSTELLATION)
S&F in repair swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout, sink mounted type, screwed for iron pipe etc complete all as directed (MAKE :PARRYWARE, Cat No : G4803A1 / CERA, Cat No: F1003104 / PRAYAG, Cat No : 9014/ HINDWARE, Cat No: F280012 / ESS ESS, Cat No: PT-19 / JAQUAR, Cat No: SOL-6357)
S&F in repair self closers pillar taps fancy type chromium plated brass, complete all as specified and directed. Make: Prayag, Cat No.BSC-02 or Equivalent model in Parryware/ Jaquar/ Hindware.
S&F in repair self closers Bib taps fancy type chromium plated brass, complete all as specified and directed. Make: Prayag, Cat No.BSC-06 or Equivalent model in Parryware/ Jaquar/ Hindware.
S&F in repair Chromium plated brass Bib cock with wall flange (premium quality), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4880A1 / JAQUAR, Cat No: FUS-29037 / CERA, Cat No: F1015151/ ASIAN PAINTS, Cat No: ALBC101 / PRAYAG, Cat No: 9306-N/HINDWARE, CAT No: F360004)
S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12)
S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : PARRRYWARE, Cat No: T6904A1 / CERA, Cat No: F5002105 / JAQUAR, Cat No: ACN-1121BN / PRAYAG, Cat No: BA-11 / ESS ESS, Cat No: AC-702)
S&F in repair 15mm bore auto closing concealed urinal flush valve with wall flange, fancy type chromium plated incl all accessories complete all as specified and directed. (Make: JAQUAR, Cat No: PRS-073 / PARRYWARE, Cat No: G2030A1 or equivalent model in CERA / HINDWARE / PRAYAG)
S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 or equivalent model in JAQUAR / CERA / HINDWARE / PRAYAG)
S&F in repair Opal Prime Tall boy sensor faucet for wash basin (Battery operated), complete all as specified and directed. Make: Jaguar Cat No SNR 35017PM of or equivalent in /Kohlar/Parryware.
S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231 / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-23)
Dismantling of 100mm bore cast iron (sand cast) soil, waste or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed.
Dismantling of 150mm bore cast iron (sand cast) soil, waste or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed.
S&F 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified.
S&F 150 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified.
S&F 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.
S&F 100 mm dia CI branch pieces, complete all as specified.
S&F 100 mm dia CI bend, complete all as specified.
S&F 100 mm dia CI branch pieces with ovel access door, complete all as specified.
S&F 100 mm dia CI bend with ovel access door complete all as specified.
S&F 100 mm dia CI sanitary connection socket to fit WC outlet complete all as specified.
S&F for cast iron floor trap/nahani trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate ,100mm dia outlet, complete all as specified .
S&F 150 mm bore CI (sand cast) bend any radius, diminishing pieces or tapers, complete all as specified.
S&F 150 mm dia CI (sand cast) branch, with or without ears, complete all as specified.
S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay, including bolts and nuts and securing ends of stays to wall or roof of 100 mm dia of pipes.
All as per item No.183.00 above, but 150 mm dia of pipes.
M&L for preparation of old decorated plastered surfaces or un plastered surfaces of wall and applying one coat of white wash complete all as specified.
All as per item No.185.00 above, but on ceiling.
M&L for preparation of new plastered surfaces of walls and applying 3 mm thick wall putty over plastered surfaces, finishing surfaces even and smooth and applying two coats of acrylic distemper with roller over a coat of alkali resistant primer as per manufacturer's instructions, complete all as specified and directed.
All as per item No.187.00 above, but on ceiling.
Complete removal of existing treatment from wall surface, complete all as specified and directed.
All as per item No.189.00 above, but on ceiling.
M&L for preparation of removed existing treated plastered surfaces of walls and applying 1 mm thick wall putty over plastered surfaces, finishing surfaces even and smooth and applying two coats of acrylic distemper with roller over a coat of alkali resistant primer as per manufacturer's instructions, complete all as specified and directed.
All as per item No.191.00 above, but on ceiling.
M&L for applying one coat of acrylic distemper with brush on old decorated surfaces of wall, including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
All as per item No 193.00 above, but on ceiling.
M&L for preparation of removed existing treated plastered surfaces of walls and applying 1 mm thick wall putty over plastered surfaces, finishing surfaces even and smooth and applying two coats of plastic emulsion paint with roller over a coat of alkali resistant primer as per manufacturer's instructions, complete all as specified and directed.
M&L for preparation of old treated surfaces of walls and applying one coat of plastic emulsion paint with roller, all as specified and directed.
M&L for preparation and applying with textured paint of required shade (two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of interior or exterior primer applied @ 2.20 Kg/10 Sqm over 2 mm thick wall care putty on plastered surfaces, of Make-Asian/Nerolac/ Berger/ Dulax all as specified and directed.
M&L preparation of surfaces and pasting of wall paper of any design/ pattern/ shade, as approved by GE, complete all as specified and directed. Make: Asian(Brand-Nilaya) or equivalent in other approved makes of Nerolac/Berger.
M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of cement based paint with brush complete all as specified and directed .
M&L for preparation of new surfaces of walls and soffit of chajjas, roof slab etc by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 1mm thick exterior wall putty for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajjas, roof slab etc by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scrapper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5 mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
Note for item No 200 & 201:- The all process of painting will be carried out of Manufacturer authorised representative only, Jet Water machine and Graco Spry painting Machine shall be borne by the contractor and also the contractor should provide adequate jet and Spray machines as per site requirement as directed by Eng-in-Charge.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer after complete removal of old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
All as per item No.203.00 above, but on steel surfaces
M&L for preparation of old painted steel & iron surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and as directed.
M&L for applying one coat of French polishing on surfaces of any description , width or girth including cleaning and preparing the surfaces including a coat of wood filler on one or more coats on old work, complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.
M&L preparing old surfaces of any description and applying one coat of synthetic enamel paint over brick, stone, concrete, asbestos cement surfaces or plastered surfaces complete all as directed.
M/S SHRI P K ACHARJEE
UNITED ENGINEERS
dutta and dutta
M A ENTERPRISES
ARJUN DAS VALECHA
JOY-EN-JOY
DEB AND COMPANY
MS HORIZEN
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .