Supplying errection of Elctrical PSC Poles fitting of LED Street Lights to SWM site in Huliyar TP Limit

Supplying errection of Elctrical PSC Poles fitting of LED Street Lights to SWM site in Huliyar TP Limit

PSCC Pole-9 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards P.No.3, I.No.1.06, Vol-6 SR-2023-24

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. P.No.43, I.No.14.2,Vol-6 SR-2023-24 Hard Soil

LT 2 Pin Cross Arm-MS(Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018) P.No.4, 1.No.2.08, Vol-6 SR-2023-24

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric 1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator P.No.5, I.No.6.04, Vol-6 SR-2023-24

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric No. 8 Strain Insulator P.No.5, I.No.6.07, Vol-6 SR-2023-24

ACSR COnductor as per IS-398 (Part - 2/1996) Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM P.No.5, I.No.7.02, Vol-6 SR-2023-24

Erection of PoleS Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth P.No.44, I.No.2.02, Vol-6 SR-2023-24

Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., Fixing of 2 Pin cross arm with

Insulator and Braces fixing P.No.45, I.No.5.01, Vol-6 SR-2023-24

Clamps A Type (MS & GI) as per IS-1977 PSCC Pole (200 Kg WL) Clamp - MS(Dwg No. BESCOM/GM/QS&S/31 Dtd 24.11.2018 P.No.4, 1.No.5.05,

Vol-6 SR-2023-24

Digging of Pit for GUY SET Hard Soil P.No.44, I.No.1.7.2, Vol-6 SR-2023-24

Digging of Pit for providing GI Pipe type Earthing Hard Soil P.No.43, I.No.1.6.2, Vol-6 SR-2023-24

Clamps A Type (MS & GI) as per IS-1977 Guy Clamp - Gl P.No.5, I.No.5.10, Vol-6 SR-2023-24

Clamps A Type (MS & GI) as per IS-1977 Turn Buckle (GI) (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)P.No.5, I.No.5.11, Vol-6 SR-2023-24

Clamps A Type (MS & GI) as per IS-1977 Anchor Rod using 12 mm rounds/Guy Rod - MS(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) P.No.5, I.No.5.1.2, Vol-6 SR-2023-24

Clamps A Type (MS & GI) as per IS-1977 PSCC Pole (200 Kg WL) Clamp - GI P.No.4, 1.No.5.06, Vol-6 SR-2023-24

Guy Wire & GI Wire as per IS-2141 7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM P.No.5, 1.No.8.01, Vol-6 SR-2023-24

Fabricating supplying and mounting MS box made out.... SWG suitable for floor/wall mounting, fully weatherproof with provision for better heat dissipation, provided with hinged front cover, equipped w...

SupplyingofTPST withrewirableporcelainchannelsin SMenclosure Madeoutof14SWGpowdercoatedp sintofapprovedcolour 63A

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 65 A P.N...

Supplying&fixingminiaturecircuitbreakersonexisting MCBdistributionboardsusingnecessaryfixingmat erialsand C Typecurve, indicatorON/OFF,energycross- Owith Ghortcircuitbreaking capacityof10Kandcompletew...

Supplying, fixing, wiring, earthelectrodeforgroundingconduits, I.C.cutoutsandotherequipment'sonthem eterboardusing40mmdia2.90mmthick

Glpipe2.5mlongburiedinapit. Thepitshouldbefilledwithequalpro ...

Supplyingand Fixing. mmdiaclampsssAGlpipebracketupto2.7meterslongterminatedwithareducin goollarof40x25mmtowhichextrapipeof175mmlengthisfixedforfixingMV/SV/MH/FTLstreetlightfittingof allcapacitiesonrai...

SupplyofLEDStreetlightluminairewithpressurediecastaluminiumhousing bodyforoptimalthermaldissipation. mpcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonatemate rial, deliveri...

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade, multistrandcopperwirewith owconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 2.5 mm2P.No.5, I.No...

Supplyingandfixing Microprocessorbased Electronictimer(withoutcontactor, DinMountingusingnecess arybolts, nutsandwashersetc...)3-120sec setting. P.No.21, I.No.5.47, Vol- SR-2023-24

Pre Paid Energy Meter 3 Phase, 5-30 Amps, 1.0 Accuracy Class with Key Pad Technology consumer interface unit along with pillfer proof box P.No.23, 1.No.53.08, Vol- SR-2023-24