PROVISION OF SITE OFFICE AGAINST DEFICIENT MARRIED ACCOMMODATION FOR SAILORS IN MULTI STORIED CONFIGURATION AT MUMBAI UNDER GE (P) (NW) NO 2 COLABA MUMBAI

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Earth work in excavation any kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed by Engineer-in-charge.

M & L for cement concrete 1:3:6 ,type C-2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Precast cement concrete solid block masonary type C1, 1:3:6 using 20 mm stone aggregate, exc 10 cm in width, set in cement mortar 1:6 complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

M & L for hardcore broken stone or boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 50 mm thick cement concrete type D-2 , 1:4:8 using ,40 mm graded stone aggregate in sub base of flooring complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on concrete/wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 12 mm thick in cement mortar 1:4 mixed on concrete wall surfaces, finished with fair and even complete all as specified and directed.

M & L for applying two coats of acrylic distemper over one coat of primer over 1mm thick wall care putty to new plastered wall surfaces inluding preparation of surfaces complete all as specified and directed.

M & L for applying two coats of cement base paint over one coat of primer over 1mm thick wall care putty to new plastered wall surfaces inluding preparation of surfaces complete all as specified and directed.

S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 30 mm thick flush shutters , solid core construction , with Block boards core and plywood face panels , commercials type on both side complete all as specified and directed.

S&F mild steel flat iron 25 mm x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F 100 mm size butt hinges "medium weight" cold rolled mild steel complete all as specified and directed.

S&F 75 mm long butt hinges, "medium weight" cold rolled mild steel complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 8 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for RCC type B-1,1:2:4 using ,20 mm graded stone aggregate in lintel upto 1.5 m clear span, cills, steps: seismic and other similar bands , plinth courses, string courses, lacing courses, parapet and railing upto 60 cm in height,coping , kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including use of formwork(straight or curved) complete all as specified and directed. Note : Reinforcement for concrete shall be measured and paid seperatly

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Anodised aluminium powder coating of any colour window and ventilator shutter fixed type/sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws etc complete all as specified and directed.

S & F anodised aluminum snap grid frame work of size 605 mm x 605 mm for false ceiling complete all as specified and directed.

Material and labour for Providing and fixing 6mm thick Non asbestos fibrecement building boards fixed or laid/ inserted to timber/GI/Aluminium framework in celing with screws and applying 3 coat of white wash complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match,over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincl 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

S & F for Wash Hand basins, Vitreous China, white, flat back, size 630 mm x 450 mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S & F of 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

M & L for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC waste pipe suitable for wash hand basin including fixing arrangement complete all as specified and directed.

S & F of 32 mm size (Dia of discharge pipe) waste coupling of PTMT half or full threaded (minimum weight 45 gram) complete all as specified and directed.

S & F for Vitreous China wash down water closet pan (pedestal pattern), white, fixing bolts, (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 10 Ltr capacity PVC flushing cistern white valveless shyphonic action type low level with inlet, ball valve, float valve and handle including bracket and flush pipe fixed to wall complete all as specified and directed.

S & F 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F of 15 mm bore bib taps,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F of 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S & F of Towel ring of PTMT, fixed with and including Chromium plated brass screws and wooden / plastic cleats (minimum weight 90 gram) complete all as specified and directed.

S & F PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia complete all as specified and directed.

S & F of 15 mm bore angular stop valves, fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 20 mm bore of pipes unplasticised PVC pipes of pressure rating 10 Kgf/ Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and directed.

S&F 25 mm bore of pipes unplasticised PVC pipes of pressure rating 10 Kgf/ Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and directed.

S&F UPVC soil or waste pipe 110 mm bore single socket in any length type 'B' with rubber ring joints laid in trenches or floor / wall complete all as specified and directed.

S&F UPVC soil or waste pipe 75 mm bore single socket in any length type 'B' with rubber ring joints laid in trenches or floor / wall complete all as specified and directed.

S&F UPVC (SWR) bend in any radius 110 mm dia bore with access dore complete all as specified and directed.

S&F UPVC (SWR) bend in any radius 75 mm dia bore with access dore complete all as specified and directed.

S&F UPVC (SWR) junction single (single T) equal or unequal 110 mm dia bore with access dore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

S & F of 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F Ball brass valves 25mm size, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all directed.

S&F 3.0 mm thick figured glass, pin head type glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and directed.

M & L for PVC (SWR) gully trap of 125/ 110 mm setting and jointing with solvent cement complete all as specified and directed.

Supply and fixed mild steel chromium plated aluminium anodized tubular curtain rails, 20mm dia, with fixing brackets, stops, rollers etc. complete all as specified and directed.

M&L for reinforced concrete pipes 150 mm dia, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes 150mm bore, including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M & L for 75 mm thick, cement concrete type C-2 , 1:3:6 (40 mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement as in plinth protection including filling of joint with bitumen and sand in the ration 1:2 complete all as specified and directed.

S & F of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position including tank nipple and other requiored accessories complete all as specified and directed.

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position including tank nipple and other requiored accessories complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as inhard/dense soil complete all as specified and directed.

M & L for plain cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate), as in copings and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc. including cutting, welding etc. confirming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed.

S&F plate (Plain or chequered) channels of 5mm thick, square cut to notched (ordinary and counter sunk forming holes, without any attachment) Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of bolt 11 to 15 mm complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc complete all as specified and as directed.

Returning/filling in including spreading, levelling, watering and well ramming in layers n exc 25cm in soil complete all as specified and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L for point wiring with two run of PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm (Red and Black colour), 1100 volts grade cable, FRLS, passing through PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface and S&F PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly with all accessories complete all as specified and directed for the following:-

Description all as per srl item No-77 here in above but for One light point controlled by one way switch complete all as specified and directed.

Description all as per srl item No-77 here in above but for One Ceiling fan/Exhaust Fan point controlled by one way switch complete all as specified and directed.

Description all as per srl item No-77 here in above but for One 3 pin socket outlet, 5 Amps on the same board with other switches complete all as specified and directed.

Description all as per srl item No-77 here in above but for One 3 pin socket outlet, 5 Amps on the Independent board complete all as specified and directed.

All as per item No 77 above but with 2.5 sqmm cable for one 3 pin socket outlet 15/16 Amps on the independent board complete all as specified and directed.

M & L for ceiling rose, 3 phase/ PVC/polycarbonate, isolated body of size complete all as specified and directed.

M & L for modular switch, 1 way 6 Amp, 1 module complete all as specified and directed.

S & F for modular socket 6 Amp, 2/3 pin, combined, 2 module complete all as specified and directed.

S & F for modular socket 6/16A, 6 pin, combined, 2 module complete all as specified and directed.

M & L for modular switch, 1 way 16 Amp, 1 module complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED Security/Street light fittings 35W,230V AC outdoor type with high pressure die cast aluminium hosing and heat resistance complete with driver, lamp bracket with impact and corrison resistance including thermal management in multiple optics complete with IP 65/66 protection complete, etc with all accessories internal pre wired and including connecting up with two core flexible copper conductor cable with suitable size etc and fix GI pipe bracket 25 mm dia 0.9m long and two set of clamps made out of 30 x 5 mm MS flat and fixed with anchor bolt suitable for 35 W security light fittings all as specified and directed. wall mounting type extruded metal/alluminium body, and electronic LED driver, etc. with all accessories internal prewired &including connecting up with 2 core flexible copper conductor cable with suitable size etc. and fix GI pipe bracket 25mm dia 0.9 M long & 2 set of clamps made out of 30*5mm MS flat & fixed with anchor bolt suitable for 15W security light fitting all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep and connecting up including provision of three core flexible copper wire of size 23/0076 rom ceiling rose to ceiling fan complete all as specified and directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, Copper winding of sweep 300 mm and connecting up including provision of three core flexible copper wire of size 23/0076 rom ceiling rose to exhaust fan complete all as specified and directed.

Supply and fixing rating 240V, 10KA 'C' curve, miniature circuit breaker (MCB) of Single Pole 5 to 32Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing rating 240V, 10KA 'C' curve, miniature circuit breaker (MCB) of Single Pole Neutral 32Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing rating 415V 10KA 'C' curve, miniature circuit breaker (MCB) of TPN 40 to 100Amp current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing of double door metallic sheet metal enclosure for DB when MCBs to be used TPN 8 ways, 415 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed.

M & L for Earthing to OH/Sub stn with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead GI wire 4 mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of MES Schedule pt-I 1991, GI earth lead wire protected by GI pipe 15mm dia light grade and connected to earth test point including excavation in any type of soil, returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete, specified and directed by Engineer-in-charge.

Supply and Fixing for Sub main wiring with two single core (Red and Black Colour) PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 2.5 sqmm and incl drawn through PVC copper conductor, single core cable in PVC conduit pipe 25 mm dia including accesssories (ISI marks), one run of single core (Green colour) PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 2.5 sqmm for earth continuity wire and connected of common earth dolly. complete all as specified and directed by Engineer-in-charge.(DB to Rooms)

M & L for excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete(For cable) specified and directed by Engineer-in-charge.

M & L for Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

M & L for Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L for dry sand cushioning to U/G cable in layers of 23 cm thick (8 cm before laying the cable and 15 cm thick after laying the cable, punned thickness shall be measured) in trenches complete all as specified and directed. Note: - Only punned thickness shall be measured and paid.

M & L for modular type sub class ‘B’ bricks, laid in trenches as cable covers laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.

Supply, laying, jointing and testing in trenches/ducts or fixing to pole/wall or passing through pipe,4 core PVC insulated aluminium conductor served with an inner sheathing of PVC tape,XLPE insulated, armoured, heavy duty electric cable size 10 sqmm with aluminium stranded conductor 1100V grade complete all as specified and directed.

Supply and fixing galvanised steel tubing light grade 40 mm bore laid in trenches or fix to wall/hole with fitting as required for cable protection complete all as specified and directed.

Cutting of existing CI pipe in position for inserting of tee, bend collar other type of CI fitting for addition/alternation of existing system complete all as specified and directed for following sizes :-

Description all as per srl item No-101 here in above but for 150 mm bore

Description all as per srl item No-101 here in above but for 100 mm bore

Supply, fixing & laying only GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ complete all as specified and directed for following size :-

Description all as per srl item No-102 here in above but for 50 mm bore GI pipe

Description all as per srl item No-102 here in above but for 25 mm bore GI pipe

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixing complete all as specified and directed for following size:-

Description all as per srl item No-103 here in above but for 50 mm bore

Description all as per srl item No-103 here in above but for 25 mm bore

Bob Enterprises (BID ID -3271287)

I.J Enterprises (BID ID -3275545)

Shetty Construction Co (BID ID -3275567)