Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.6 LAccepted-AOC | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹10.8 L+₹12,736.80 (1.19%)Rejected-Finance 544 STREET NO 10 GHUMMAN NAGAR PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹11.5 L+₹77,882.20 (7.27%)Rejected-Finance 32 FATEH ENCLAVE OFFICERS ENCLAVE PHASE II PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹12.0 L+₹1.3 L (11.7%)Rejected-Finance B XI 746 STREET NO 6 BHARAT NAGAR BARNALA 148101 | BARNALA | BARNALA | PUNJAB | 148101 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹12.3 L+₹1.6 L (15.3%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
12 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Himanshu, IDSE
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH TARAPORE ENCLAVE PATIALA CANTT
As per tender documents
2022_MES_545765_1
GE(S)/PAT/T-32/P/2022-23
Open Tender
Civil Works
Item Rate
180 days
Mil Stn Patiala
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (South) Patiala
₹30,000
Yes
26 Sept 2022
17 Aug 2022
14 Sept 2022
17 Aug 2022
12 Sept 2022
30 Aug 2022
17 Aug 2022 - 23 Aug 2022
Amount
Taking down chowkhats or frames (Wooden joineries with wooden or steel chowkats) complete with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store as complete all as specified and directed by Engineer incharge.
Taking down chowkhats or frames (Wooden joineries with wooden or steel chowkats) complete with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as complete all as specified and directed by Engineer incharge.
S & F Anodised aluminium powder coating of any colour( thickness of powder not less than 50 microns) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified and directed by Engineer incharge.
S & F Anodised aluminium window and ventilator shutters fixed type without sash bar, powder coating of any colour ( thickness of powder not less than 50 microns). Aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed by Engineer incharge.
Powder Coated Anodised aluminium frame for doors, windows with grills, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer incharge.
S & F Powder Coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. and includeing powder coating of any colour ( Thickness or powder coating not less than 50 micron) complete all as specified and directed by Engineer incharge.
S&F Sheet glass 5.50mm thick ordinary quality & fixed in squares exc 0.50 Sqm each pane
S & F Aluminium tower bolt 200mm long Add and fixed complete all as specified and directed.
S & F Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S & F in repair Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer incharge.
S & F in repair Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed by Engineer incharge.
S & F in Repair Floor door stopper 150 mm long of aluminium alloy body and toungue anodised with hard drawn steel spring fixed in floors complete all as specified and directed by Engineer incharge.
S & F in repair Aluminium handles of size 150mm oval typecast type anodised complete all as specified and directed by Engr-in-Charge.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conformint to Fe-410 W complete all as specified and directed by Engineer incharge.
M & L for Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer incharge.
Taking down old unserviceable wire cloth any size from wooden/ metal frames complete all as specified and as directed .
S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples incl replacement of second class wooden beading where ever reqd complete all as specified & as directed.
Hacking out old broken glass (any thickness , size , quality or description) from wooden or metal frames glazed with oil putty or fixed with beads
S & F Sheet glass ordinary quality 4 mm thick not exe.0.50 sqm glazing with oil putty or fixed with wooden beads in squares any size of pane complete all as specified & as directed.
Description all as per serial item No 19 here-in-before but 4mm thick frosted glass complete all as specified and directed.
S&F Mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding complete all as specified & as directed.
Demolition of cement concrete un-reinforced in ground floors and pavings n'exec 150 cm thick (above or below ground level) complete all as specified and directed.
Demolition of re-inforced cement concrete of any description and in any position incl cutting of re-inforcement to facilitate demolition where ever reqd complete all as specified and directed.
M & L for Machine cut Mirror polished Kota stone 20mm to 25mm thick slab as in cooking platforms/ landings, treads and risers of stairs and steps laid over and including screed bed or 15mm th bedding layer in cement mortar 1:3 as base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing, polishing complete all as specified and directed.
M & L for Machine cut Mirror polished Kota stone slab flooring 20mm to 25mm thick laid over and including 20mm screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing, polishing complete all as specified and directed.
Rounding to edges of stone slabs one edge , such as in steps, cooking plateforms & other similar situations complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M & L for Glazed ceramic coloured tiles in verticle surfaces joint free with glazed economy finish Grade B-II (b) of size 300 x 600mm or bigger size 7 mm thick as approved set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10 mm thick rendering in cement mortar in CM 1:3 for Dado etc., complete all as specified. Note for skirting only Skirting may be provided from the same tiles as being used in the floor of same room to match in lieu of economy finish tiles but nothing extra shall be admissible on this account.
M & L for Non Skid Ceramic joint free tiles {Non Skid finish/ Matt superior finish Grade B-I or B-II (b) as approved} 7 to 8 mm thick with rectified edges, (square/rectangular) area of each tile exceeding 0.11sqm and not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick cement screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge
M & L for Vitrified Ceramic tiles 8-9mm thick light colour (Square/ rectangular) polished, area of each tile 600 x 600 mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 15mm thick screed/ bedding layer in CM 1:4 complete all as specified and as directed.
M & L for PCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) 25 mm thick to receive the floor tiles.
Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed
M & L for rendering 15mm thick cement plaster in cement mortar 1:4 using WPC on fair faces of brick or concrete surfaces on walls etc., finished even and fair without using extra cement, complete all as specified and directed. Note: - Supply only WPC Shall be measured separately & paid for accordingly & shall be provided @ 3% by weight of cement or as per manufacturers instructions as directed by Engineer in Charge
Supply only Liquid waterproofing compound
M & L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces on walls etc., finished even and fair without using extra cement, complete all as specified and directed.
Dubbing out average 15 mm thick in cement mortar 1:4 on irregular faces of walls, ceiling & chhajjas incl removing carefully old damaged loose concrete from RCC / PCC surfaces of ceiling/ Chhajjas for double storey bldgs complete all as specified and as directed by Engineer incharge.
M & L for Rendering 10mm thick cement plaster in CM 1:3 on concrete surfaces in ceiling/ Chhajjas finished even and fair without using extra cement all as specified.
Preparation of new plastered or unplastered surfaces of walls etc., and M & L for applying two coat of distemper Oil Emulsion (OBD) over a coat of chalk whiting (as primer) complete all as specified and as directed.
M & L for Preparation of new plastered or unplastered surfaces of ceiling etc., and applying three coat of lime white wash on ceiling surfaces all as specified.
Preparation of new plastered or unplastered surfaces of walls etc., and M & L for applying two coat of cement base paint over a coat of Alkli Resistance priming paint (as primer) complete all as specified and as directed.
Preparation of old plastered or unplastered surfaces of walls etc., and M & L for applying one coat of cement base paint complete all as specified and as directed.
M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and fair with using extra cementcomplete all as specifiedand as directed.
M & L Glass dividing strips 38 mm wide and 3mm thick laid and fixed in position for laying floor finishes complete all as specified and directed.
Demolition of Brick work including all quains and arches pillars etc built in cement mortar or cement lime mortar complete all as specified and directed.
M&L for brick work in cement mortar (1:6) using sub class 'B' old size bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed
M & L 50mm thick PCC (1:3:6) type C2 (using 40mm grade aggregate) as in plinth protection, finishing the surfaces even & fair w/o using extra cement.
M & L 75mm thick Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base under floors etc complete all as specified and as directed.
S & F precast concrete interlocking paver block any shape and size & incl 25mm thick layer of sand cushion complete all as specified and as directed. confirming to IS 15658-2006 of 60 mm thickness, M-35 grade
Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
Dismantling timber scantlings in framed work 40 sq. cm and over in section, in any position
S&F Anodised aluminium snap grid frame work for false ceiling all as specified (Size of grid 605 x 605mm) incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer incharge.
M&L for Gypsum Board 600mmx 600mm x 12mm thick in ceiling fixed as per manufacturers instructions all as specified and as directed by Engineer incharge.
S & F for hollow PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.
M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
S F PVC (SWR) pipe110 mm bore Rain water pipe single socketed in any length with rubber ring joints, fixed to wall incl Tacking Down
FAVOURITE ENGINEERS
SWAMI ENGINEERS
M/S RAJ KUMAR GUPTA
NORTON BUILDER
Arneja Builders
m/s panchmukhi builders
Jagdish kumar aggarwal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .