Periodical services to Md JCOs/OR and MES Quarters incl. certain OTM accn under AGE B/R Aurangabad at mil stn Aurangabad

Amount

Complete removal of existing treatment on surfaces of walls (any number of layers ) including preparation of surfaces and applying Two coats of white or tinted /coloured cement base paint complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls and applying one coat of white or tinted cement base paint complete all as directed and specified.

Preparing old decorated plastered /un plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of oil bound distemper on wall surface to give uniform and smooth surface complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers ) including filling depressions of scrapped surfaces with one coat Jk/Birala wall care putty and applying two coats of oil bond distemper on walls white or tinted, over a coat of primer complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of ceilings and applying one coat of white or tinted oil bond distemper complete all as directed and specified.

Preparation of old plastered or unplastered surfaces of walls and applying one coats of colour wash all as directed and specified.

Complete removal of existing treatment on walls (any number of layers ) including filling depressions of scrapped surfaces with wall care putty and applying two coats of white wash complete all as directed and specified.

Preparing plastered or unplastered old decorated wall surfaces including cornices, pillars etc, and applying One coat of white wash all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls and applying 3mm thick JK/Birla wall care Putty all as directed and specified.

Preparing plastered or unplastered old decorated ceiling / soffits surfaces and applying One coat of white wash all as specified and directed.

Preparation of old treated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted surfaces of wood and wood based materials over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Complete removal of existing treatment from surfaces of walls, preparation of surfaces and applying two coats of exterior grade emulsion paint (Apex or equivalent) on walls, white or tinted complete all as specified and directed

All as per item no 13 here-in-before but one coat of exterior emulsion paint.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Rough cast finish plaster with a mixture consisting of crushed stone of fine gravel aggregate mixed with course sand and cement in ratio of (1:1) over & including 10 mm thick rendring in cement mortar (1:3) on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed.

15 mm thick rendering in CM 1:4 on stone masonary surfaces or other than fair faces of brick surface/ concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint on wall all as directed and specified.

Preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash all as directed and specified.

All as per item No 21 her-in-before but three coats of white wash on ceiling surfaces.

Demolition of reinforced cement concrete in ground floors and pavings exc 15 cm thickness (below or above ground level and reinforcement cut as required to faciliate demolition) complete all as specified and directed

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required (superficial area exc 150 sq.cm but n exc 400 sq cm) complete all as specified and directed.

Mild steel work as in frame for all type of chajjas of pramanent buildings first to third storey, roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

All as per serial item No. 26 here-in-before but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders

Cement concrete M-25 design mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and collumns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) including scoffolding up to three storey complete all as specified and diercted.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and diercted.

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with black synthetic enamel paint complete all as specified and directed.

Stack clamps made out of 50 mm X 5 mm flat iron and 16 mm round iron stay including bolts and nuts and securing ends stays to wall or roof includding taking down the existing clamps for PVC pipe 110 mm bore at any height complete all as specified and directed.

Taking down rain water pipes ( any size or pattren ) including all fittings etc complete all as specified and directed.

PVC (SWR) rain water pipes 110 mm bore, single socketed in any length with rubber ring joints fixed to walls with stack clamps complete all as specified and directed.

Dismantling of PVC soil waste and rain pipes or vent pipe includding connecting fittings fixed to wall or floor complete all as specified and directed.

PVC (SWR) rain water pipes 110 mm bore, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

PVC (SWR) bends any radius with access door of 110 mm bore,fixed in repairs complete all as specified and directed.

PVC (SWR) branch piece of 110 mm bore , single (single Y) equal or unequal, fixed in repairs, complete all as specified and directed.

PVC (SWR) 110 mm bore vent cowl fixed in repairs, complete all as specified and directed.

Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples on concrete surface below plaster complete fixed in repairs all as specified and directed.

M/S. M.A. Sharief engineers and contractors

sonu enterprises

M/s S.R lahoti