Traffic Improvement and beautification works at B2 Byepass Junction, JDA, Jaipur, Rajasthan

Amount

JODHPUR STONE CLADDING

Providing & fixing Jodhpur Stone CLADDING 40 MM thick over Structural base with cement Mortar, with hairline joint at transition including cutting, rubbing and finishing, complete as per drawing and direction of Enginner- In- Charge and Architect. The Stone measurement will be done of outer most dimension of finished stone in X, Y and Z directions. The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

JEERAWAL WHITE GRANITE FLOORING

Fine dressed & machine cut edges 25-30 mm thick Jeerawal White Granite flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing The work may be done with combination of other Granite stone as per pattern given in drawing.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge. Stone Sample to be Approved By Engineer Incharge and Architect Before Execution of Work.

GRAY GRANITE

Fine dressed & machine cut edges 30-35 mm thick Grey Granite (Sadarhali Stone) flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. The work may be done with combination of other Granite stone as per pattern given in drawing.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge. Stone Sample to be Approved By Engineer Incharge and Architect Before Execution of Work.

BLACK GRANITE FLOORING

Fine dressed & machine cut edges 25-30 mm thick Black Granite flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design & drawing. The work may be done with combination of other Granite stone as per pattern given in drawing.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge. Stone Sample to be Approved By Engineer Incharge and Architect Before Execution of Work.

PINK GRANITE FLOORING

Fine dressed & machine cut edges 25-30 mm thick Pink Granite flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. The work may be done with combination of other Granite stone as per pattern given in drawing.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge. Stone Sample to be Approved By Engineer Incharge and Architect Before Execution of Work.

Providing and Fixing Aluminium composite panel of approved make 3mm thick with 0.5mm thick skin & PVDF coated approved shade for wall panelling. Main framing work to be done using 50mmx25mmx1.6mm tubular section of approved make. Stainless steel screw to be used to fix the ACP panel to be fixed to the main frame with industrial adhesive tape and panel groove to be sealed with weather proof silicon sealant suitable for glass/aluminium etc. Complete in all respect as approved by Engineer-in-charge.Sample to be Approved By Engineer Incharge and Architect Before Execution of Work.

ART WORK

Providing and executing at site mural art work with traditional architecture by synthetic paint as per design and drawing. The item should be inclusive of finished wall with birla putty (interior/exterior). The cost is inclusive of all supplies, labour, civil work (if required ), scaffoldign, looading, unloading, and cost of molds whenever required. Complete in all respect as direction of engineer in charge.

JODHPUR STONE

Providing and Fixing Jodhpur Stone Sculpture, Column, Artifact, capital, pedestial, cornices,Pots, Kalash etc including all carving as per approved drawing and all charge like labour, charges for fixing and material required for fixing like araldite, white cement, pigment and all scaffolding required etc, Complete in all respect as direction of Engineer in charge Stone sample to be approved by Engineer-in-charge and Architect before execution of Work.

BASAWARA WHITE STONE

Providing and fixing at site, solid stone ement/statue/sculpture/cladding made out by carving work in first class (Superior class) Basawara White Stone free from cracks, flaws & stains etc. with additional/required carving work (3-dimensional work) on stone element including Plainning, developing, making base, carving work, polishing, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P (including white cement, pigment, Chemical, SS clamps and fasteners of approved brand etc.), fixing over/on base/surface as per shape-size & placement of approved drawing , finishing, surface treatment etc. covering properly till the date of opening/inauguration of site etc. The stone should be pre/post -treated with suitable chemical polish for maintaining original color and Ceramic surface treatment to be done to avoid surface taining & effectof external weather condition, pollution & dust etc. Proto type model of element/statue/sculpture/cladding (fiber glass or plaster of Paris) may also be required of same shape, size and detailing, for which nothing be paid extra. Preferably, the single piece stone block shall be used for the particular element/statue/sculpture but if not possible, material from the same block/lot of stone, shall only be used for similarity & fine n hair line pasting/jointing shall be done with suitable material in such a way so that joint(s) be not visible from front site. Complete job in all respect including in-lay work if required, as per approved design & drawing under approval of project consultant, appointed for the project & as per directions of Engineer-In-Charge complete in all respect.

LATERITE WALL TILES

Providing and fixing laterite wall tiles conforming to IS: 15622 , of approved make of 12"x7"x18" size as approved by Engineer-in-Charge, on wall, as a wall tile (12"x7"x18")over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sample to be approved by Engineer-in-charge and Architect before execution of Work.

GUN METAL

P & F Gun metal statue/sculpture of any type & size as per approved drawing and placement of statue/sculpture as per direction of engineer-in-charge (composition of Gun Metal, Copper 85%, Tin 5% Lead 5% Zinc 5%.) 1: 1 Scale Model 1:1 Scale Model Shall be prepared in EPS with a final finish of POP to finalize stance and basics of required sculpture and to examine final features and shape of statue Sillicon Rubber Mold for Waxoming Mouds shall be prepared in Sillicon Rubber for further working in WAX Metal Casting Lost Wax casting process shall be applied and panel of the statue will be casting in minimum 1 to 2 pieces at our in house foundry. Average thickness of skin shall be 6 to 7 mm with composition of bronze will be Copper 75% ,Tin-10 %, Lead -10 %, Zinc -5% (Including 12% GST and Transportation and installation cost)

BENCHES

Providing & Fixing of Benches (As per the Drawing) A. Dimensions (Approximate) :- Length - 2250 mm, Width - 700 mm, Height – 950 mm B. Planks :- cedar wood plank 100mm X 20mm ] Finish in Wooden smooth Metal Frames & Structure are in Mild Steel duly powder coated. NOTE :- 1. The Mild Steel Section of 100 x 400 x 8 mm was used to grout and anchor fasten the structure on PCC base. 2.The Planks used are of 100 mm x 20 mm dimensions and were replaced from the ones mentioned in the drawings. 3. Few minor changes were done as per the need to strengthen the structure.

DUSTBIN

Providing & Fixing of Dustbin (As per the Drawing) A. Dimensions (Approximate) ;- Length - 1300 mm, Width - 500 mm, Height – 1200 mm B. Planks ;- Polystyrene Section [ 60mm X 20mm ] Finish in Wooden smooth C. Metal Frames & Structure are in Mild Steel duly powder coated. Note: 1. The Mild Steel Section of 200 mm x 8 mm round was used to grout and anchor fasten the structure on PCC base. 2. The Planks used are of 60 mm x 20 mm dimensions and were replaced from the ones mentioned in the drawings.

BLACK CADAPPA COBBLE FLOORING

Providing and fixing Black Cadappa Cobble (4"x4"x3") Stone flooring work dressed stone (4" by 4") 3" thick in honed finished with pattern as per approved design over 25-50mm thick base in CM 1:6 including pointing with cement sand mortar 1:2 (1 Cement:2 sand) match the shade of stone with joint. The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

CERAMIC GLAZED WALL

Providing and fixing Ist quality Handmade ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified as per design;approved by Engineer-in-charge and Architect), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, on wall as a handmade ceramic mural (4 METER X 80 METER)over 12 mm thick bed of cement mortar 1:5 (1 cement : 5 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sample to be approved by Engineer-in-charge and Architect before execution of Work.

BASAWARA WHITE STONE

Providing & fixing 50 mm thick Banswara stone cladding as per drawing including drawing shape on stone and engraving traditional shapes and engraving groove, border etc. The ladding shall of shapes and size as per the drawing including ixing at site as per directions. The cladding shall be measured net area provided and all wastage, cutting in shapes etc shall be borne by the agency. The Cost includes all charges like aterial, labour, fixing, scaffolding arrangement, wastage and dhesive etc. complete in all respect as per direction of Engineer in charge. Stone sample to be approved by Engineer-in-charge and Architect before execution of Work.

TRANSPLANTATION OF TREES (girth of trees beyond 50 and upto 90 cm)

Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account (a) Girth of tree shall be measured at a height of 1m above ground level. Girth of trees beyond 50cm and upto 90cm.

KERB STONE

Providing and fixing in position Jodhpur stone/ Kerb stone of size 230mmx300 mm and cut to shape as per with exposed face fine chiesel dresses fixing and jointing/pointing wit cement mortar 1:4 using pigment as per drawing and instruction of Enineer Incharge complete in all respect.(including all taxes). Stone Sample to be Approved By Engineer Incharge and Architect Before Execution of Work.

NATURAL LANDSCAPING

Providing and fixing Natural landscaping sandstone block extracted directly from natural stone quarries of natural irregularties. Ideal for Feature wall, garden lanscaping; imperfection types-chipped corners, uneven surface and tapering widths; surface- rough and unfinished (including All Taxes and transportation) (Size approx. base-5'x5' and height 8 to 10 feet) Complete in all respect as approved by Engineer-in-charge. (including all taxes). Stone Sample to be Approved By Engineer Incharge and Architect Before Execution of Work. Additional variation in size upto 10% may be possible as per the instruction given by arichitect & Engineer In Charge for which no extra payment will be made.

RWH SYSTEM

Providing and installing of RWH system by trenching of 160mmx3m RWH pipe-PN6 with injection well with 12mm spirally perforated holes at 30 mm intervals throughout the pipe resulting to an open area of 135 square centimeter/Meter and specially designed with more tensile strength to take earth’s spherical force when it inserted in the Injection well bore. The Run off along with dirt and debries deposits in the silt trap (8 feet down from ground level/ as per site condition)and overflow of water, flows to the injection well (storage well with filtration unit- 20 feet down from ground level/ as per site condition) through a underground pipe and passes through multi-layers of filetration Media- 150mm gravel and coarse stone, 100 mmm of 20mm crushed stones, 100mm of Charcoal and Activated carbon, 50 mm of 40 mm crushed stones followed by perforated reinforced concrete slab wall tickness 75mm then 1350 mm dia X 150 mm ht X 100mm wt. heavy duty RCC ring (14 nos. or as per soil condition) after that "V" wire screen with 140mm HDPE percolated pipe (upto driling level) of 24m both ends are inserted with "V" wire screen which if filled with 10mm crushed stone. Also include trenching work and GST. Complete in all respect as approved by Engineer-in-charge.

TRANSPLANTATION OF TREES (girth of trees beyond 90 and upto 120 cm)

Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account.

Electrical Items

Electrical with Illumination:

Supply , installation testing and commissioning of 9M height four arm Pole Made in combination of continous Conical tapper section (6000 mm length minimum) which is fabricated using High tensile MS Sheet (3mm thick) with top dia. 80-90mm minimum & bottom 140-155 dia. Minimum 1.7M height four arm ornamental designed bracket made in combination of mild steel pipe sections 60mm dia. x 2.6mm thick & 38mm dia x 2mm thick. Decorative part made in combination of gravity cast aluminium to get horizonal arm length as shown in drawing with pleasing aesthetics. The brackets shall be a single piece assembly and should be capable of orientation in any direction and secured with stainless steel 304 grade allen grub screws. Decorative ring between base pole and bracket is made of cast iron. Decorative finial top is made of cast iron in single piece of min. height 250mm. The decorative base is made of Gravity cast aluminium with the company / brand logo embossed on it. With minimum dia of the base is 500 mm & height is 1250mm. All dimension are within +/- 5% tolerance. Cast aluminium material is LM6 grade. Cast iron-Material-Grey Iron & Grade-FG 200. The pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum). Complete in all respect including foundation of pole. Final design in concurrence with the Engineer In-charge.

Supply, Installation testing and Commmisioning of A modern heritage pathway luminaire, integral model, totally weather proof aesthetically contoured. Improved long lasting protection against ingress of dust / moisture / insects inside optical compartment with top opening facility for maintenance. Streamlined aerodynamic profile for lesser resistance. Luminaire comprises of specially contoured spun aluminium body. Non yellowing, UV stabilised, convex type acrylic diffuser. Luminaire Ø600 and height 600mm. Suitable for mounting to internally threaded pipe of designation M30. Supplied with wattage of 100W. System efficacy 100 lm/W minimum, The value shall not exceed junction temperature Tj 85°C, Luminaire body temperature should not exceed 30°C, CRI >70, different CCTs, life span of L70 / B10 @ 50000 Hrs, SDCM = 3, Type III light distribution, Operating Temperature 0°C~45°C, Input Voltage 230-240V ac, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, frequency 50-60Hz, Power factor >0.9, 6KV surge protection, THD <10%, IP65 protection, CE/BIS Conformity.

Supply , installation testing and commissioning of 6M height single arm Pole Made in combination of continous tapper Conical section (4200mm length minimum) which is fabricated using High tensile MS Sheet (3mm thick) with top dia. 70mm minimum & bottom 135 dia. Miniumum 1.76M height single arm ornamental design bracket made in combination of mild steel pipe sections 60mm dia.* 2.6mm thick min and 38mm dia. x 2mm thick . Decorative part made of combination of gravity cast aluminium to get horizontal arm as shown in drawing with pleasing aesthetics.The brackets shall be a single piece assembly and should be capable of orientation in any direction and secured with stainless steel 304 grade allen grub screws.. Decorative ring between base pole and bracket is made of cast iron .Decorative finial top is made of cast iron in single piece of min height 250mm.. The decorative base is made of gravity cast aluinium with aluminium with the company / brand logo embossed on it.With miniumum dia of the base is 500 mm & height of the base is 1250mm. All dimensions mentioned are with +/-5% tolerance. cast aluminium material is LM6 grade. Cast iron-Material-Grey Iron & Grade-FG 200. The pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum). Complete in all respect including foundation of pole. Final design in concurrence with the Engineer In-charge.

Supply , installation testing and commissioning of A modern heritage pathway luminaire, integral model, totally weather proof aesthetically contoured. Improved long lasting protection against ingress of dust / moisture / insects inside optical compartment with top opening facility for maintenance. Streamlined aerodynamic profile for lesser resistance. Luminaire comprises of specially contoured spun aluminium body. Non yellowing, UV stabilised, convex type acrylic diffuser. Luminaire Ø400 and height 400mm. Suitable for mounting to internally threaded pipe of designation M30. Supplied with wattage of 30W. System efficacy 100 lm/W minimum, The value shall not exceed junction temperature Tj 85°C, Luminaire body temperature should not exceed 30°C, CRI >70, different CCTs, life span of L70 / B10 @ 50000 Hrs, SDCM = 3, Operating Temperature 0°C~45°C, Input Voltage 230-240V ac, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, frequency 50-60Hz, Power factor >0.9, THD <10%, IP65 protection, CE/BIS Conformity.

Supply , installation testing and commissioning of 4.26M height twin arm pole made in combination of circular pipe (2500mm length minimum) which is fabricated using 88.9mm dia x 2.9mm thick (minimum) .Minimum 1.M height double armornamental designed bracket made in combination of mild steel pipe sections 60mm dia. x 1000mm (L) x 2.6mm thick min. (vertical) and 38mm dia. 2mm thick min. Decorative part made of combination of gravity cast aluminium to get horizonal arm length as shown in drawing & pleasing aesthetics. The bracket shall be in singke piece assembly and should be capable of orientation any direction and secured with stainless steel 304 grade allen grub screws .Decorative ring between base pole and bracket is made of aluminium (124mm dia. x 60mm(H) – 0.3 kgs.). Decorative ring in the middle of the base pole is made of aluminium Decorative finial top is made of cast iron in single pieceof min height 250mm. Decorative base is made of Gravity cast aluminium with the company / brand logo embossed on it . dia of the base is 300mm & height of the base is 570mm. All decorative aluminium weights mentioned are with +/-5% tolerance. cast aluminium material is LM6 grade. Cast iron-Material-Grey Iron & Grade-FG 200. The pole should be provided with an inbuilt junction box to fix 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size.The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum). Complete in all respect including foundation of pole. Final design in concurrence with the Engineer In-charge.

Supply, Installation testing and Commisioning of A modern heritage pathway luminaire, integral model, totally weather proof aesthetically contoured. Improved long lasting protection against ingress of dust / moisture / insects inside optical compartment with top opening facility for maintenance. Streamlined aerodynamic profile for lesser resistance. Luminaire comprises of specially contoured spun aluminium body. Non yellowing, UV stabilised, convex type acrylic diffuser. Luminaire Ø280 and height 250mm. Suitable for mounting to internally threaded pipe of designation M20. Supplied with wattage of 24W. System efficacy 100 lm/W minimum, The value shall not exceed junction temperature Tj 85°C, Luminaire body temperature should not exceed 30°C, CRI >70, different CCTs, life span of L70 / B10 @ 50000 Hrs, SDCM = 3, Operating Temperature 0°C~45°C, Input Voltage 230-240V ac, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, frequency 50-60Hz, Power factor >0.9, THD <10%, IP65 protection, CE/BIS Conformity.

Supply , installation testing and commissioning of 4.26M height single arm pole made in combination of circular pipe (4000 mm length minimum) which is fabricated using 88.9mm dia x 2.9 thick. Decorative part made in combination of gravity cast aluminium to get horizonal arm length as shown in drawing with pleasing aesthetics. The sleeve shall be a single piece assembly and should be capable of orientation in any direction and secured with stainless steel 304 grade allen grub screws. Decorative ring between base pole and bracket is made of gravity cast aluminium. Decorative finial top is made of cast aluminium in single piece of min. height 180mm. The decorative base is made of Gravity cast aluminium with the company / brand logo embossed on it. With minimum dia of the base is 300mm & height is 570mm. All dimension are within +/- 5% tolerance. Cast aluminium material is LM6 grade. The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum). Complete in all respect including foundation of pole. Final design in concurrence with the Engineer In-charge.

Supply installation and commissioning of LED Linear Lighting" surface mounted, energy efficient LED luminaire, elegantly designed fixture, corrosion resistant coating, and the special heat dissipation design ensures the best performance and life span. LED designed for highest efficiency in terms of more lumens at reduced wattage contributing to a Greener World. 24W Linear Wall Washer Luminaire made up of extruded aluminium for better thermal management. Corrosion resistant. Tempered glass diffuser for excellent diffused lighting experience throughout the life of the fixture. Beam angle : 10º x 60º. Operating Temperature : -40°C~+55°C. Mounting bracket with tilting feature to facilitate proper aiming of the luminaire at desired angle. Cable entries for through-wiring of mains supply cable. Protection class IP65. CE/BIS certified

Supply, Installation testing and commissioning of Tunnel light for ceiling mount neutral white with power supply safety class 1, CE/BIS certified with a high lumen per watt ratio ensuring a long lifetime good performance and low maintenance cost. LED designed for highest efficiency in terms of more lumens at reduced wattage 8340 Lm (WW) with a efficacy of more than 130 lm /w The luminaire to include driver, connectors and surge protection devices .

Supply, Installation testing and Commissioning of 3W CE/BIS certified IP65 safety class 1 having integrated power supply hardly construction luminaire . The luminaire comes with a luminous flux of 210 lm(at 3000K) and beam angle of 15deg/ 25deg/ 40deg. The landscape luminaire should have bracket arrangement and swivel range +70/20 in the horizontal direction Finish to be pure polyester powder coated as per architect color scheme .

Supply, Installation testing and Commissioning of 6W CE/BIS certified IP65 safety class 1 having integrated power supply hardly construction luminaire . The luminaire comes with a luminous flux of 401 lm(at 3000K) and beam angle of 15deg/ 25deg/ 40deg.The landscape luminaire should have bracket arrangement and swivel range +70/20 in the horizontal direction Finish to be pure polyester powder coated as per Engineer-in-charge color scheme.

Supply, Installation testing and Commissioning of 12W CE/BIS certified IP65 safety class 1 having integrated power supply hardly construction luminaire . The luminaire comes with a luminous flux of 986 lm(at 3000K) and beam angle of 15deg/ 25deg/ 40deg. The landscape luminaire should have bracket arrangement and swivel range +70/20 in the horizontal direction Finish to be pure polyester powder coated as per Engineer-in-charge color scheme .

Supply , installation testing and commissioning of IP65 safety class 1, CE/BIS certified bollard made up of Extruded aluminium column with die-cast aluminium flat top cover ,(grade 6063) with die cast AL componment and non corrosive SS fasterner .. Cast iron /AL plate to be provide for bolting and foundation . 15W bollard of Ø166 x 895mm, with lumen output of 673lm(WW), creating a pleasant light distribution with high degree of visual comfort . Finish to be pure polyster powder coated as per Engineer-in-charge design requirement. Luminaire prewired with LED driver and suitable for operation on 240V, 50Hz single phase ac supply.

Supply , installation and commissioning of IP65, IK06 Floor-, wall- and ceiling-mounted recessed luminaire intended for use with LED light sources. Comprising body and installation frame casing .Extruded aluminium body closed at the top by a transparent or anti-slip glass screen secured with silicone; with die-cast aluminium end caps complete with silicone seals; aluminium outer casing with techno-polymer caps. Having atleast 13W and 925 lm. CE/BIS certified complete with power supply , as per Engineer-in-charge design requirement . Length :-1056mm.

Supply , installation and commissioning of IP66, IK06 Floor-, wall- and ceiling-mounted recessed luminaire intended for use with LED light sources. Comprising body and installation frame casing .Extruded aluminium body closed at the top by a transparent or anti-slip glass screen secured with silicone; with die-cast aluminium end caps complete with silicone seals; aluminium outer casing with techno-polymer caps. Having atleast 6W and 525 lm. CE/BIS certified complete with power supply , as per Engineer-in-charge design requirement . Length :-1056mm.

Supply ,installation testing and commissioning 24 V, flexible opal encapsulated IP67 protected LED light lines with a cross section of 16 x 15 mm (W x H) and vertical bending direction (Top View). 3M self adhesive tape on rear side. Homogeneous and dot free illumination in very low installation depths. Can be delivered in lengths of multiples of 62.5 mm to a maximum length of up to 5 m. 110 mm IP68 plug in connectors on both ends. At maximum length only one side with IP68 plug in connector male, no female connector. Lifetime of > 60,000 hours (L80/B10). Easy installation and a rugged design for harsh environments (e. g. resistant to saltwater, UV, chlorine and solvents). Having atleast 10W/mtr as per Engineer-in-charge design requirement .

Fountain and Pump Station:

Supplying and fixing of mini volcano jet made out with stainless steel 304gr. Achive water effect ht upto 3-4 mtr. high make - Color Design India/Oase/H2O or equivalent as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and fixing of water diffuser nozzle for bowl made out with pvc body having size of 50mm dia. make - Color Design India/Oase/H2O or equivalent and as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and Fixing of 40mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch or equivalent) complete as per per the direction and entire satisfaction of Engineer in Charge

Supplying and Fixing of 50mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch or equivalent) complete as per per the direction and entire satisfaction of Engineer in Charge

Supplying installation testing and commissioning of horizontal monoset submersible Pump Set with Starter and totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CI Make : Kirlosker/Crompton/CRI or equivalent Capacity : 2 HP Three Phase Discharge 12 LPS Head 6 Mtr Suction & Delivery 65x50mm

Supply & Fixing water proof high power LED lights 6x3=18 watts, color changing/multicolored made out of stainless steel 304gr. suitable to be fitted with emitter type power LED's with all in one optical lens of 85% effeciency step pempered glass 8 mm with protection class of IP-68. (Color Design India/Oase/H2O or equivalent) complete as per the direction & entire satisfaction of Engineer in charge.

Supply & Fixing adjustable stainless stand (SS-304)/housing for LED lights with all accessories including nuts bolts complete as required for jet nozzle (Color Design India/Oase/H2O or equivalent) etc complete as per the direction & entire satisfaction of Engineer in charge.

Supply & Fixing of Master Control Device for LED Lights having Specifications:- * PLC based controller with master & slave communication protocol. * Push feature to lock any running colour chase to a fix colour. * 24 Pre-Programmed colour patterns and Load Circuit-Inbuilt with accessories complete, Body - Plastic/PVC, Output Power - 12V DC, Make : - (Color Design India/Oase/H2O or equivalent) complete.

Supply and fixing of Constant Voltage Driver (CVD) 20A suitable for 18Watt LED lights (Color Design India/Oase/H2O or equivalent) as per the direction and entire satisfaction of Engineer in Charge.

Supplying and fixing 3x 2.5 sqmm round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for filter pumps (a) 3 x 2.5 sq mm size.

Supplying and fixing 4 x 2.5 sqmm submersible Round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for RGB LED Lights complete. (b) 4X2.5 sq mm size.

Supplying and fixing PVC Medium Class conduit pipe for concealing of Cables make Kalinga/AKG/Polycab/Supreme/ISI Mark (e) 25 mm size.

Supplying and Making water Proof joint of underwater cables for submersible cable complete as required.

Supplying and 65mm dia. Debris Collection Stainers in Stainless Steel 304 grade complete as required.

Supplying and Fixing of UPVC pipes (10 Kgf/cm2) of make supreme / Prince or equivalent confirming to IS 4985:2000 including all UPVC fitting tested to a test pressure of 10 Kgf/sqcm i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge.

63 mm OD Pipe (for delivery)

50 mm OD Pipe (for overflow and drain)

32 mm OD Pipe (for inlet)

Supplying and fixing of 50 mm dia CI Butterfly Valve of pressure rating PN1.6 with EPDM rubber lining matching flanges and accessories complete short pattern as required (Kirloskar/leader/Zoloto/Sant or equivalent) as per per the direction and entire satisfaction of Engineer in Charge.

Supply and fixing of 50 mm dia Non return Valve and accessories complete. Make - Sant/Leader/HVI/Zoloto or equivalent

Intelligent Transportation System:

SITC of Traffic flow bullet camera For traffic analysis which Cover 3 lanes with steel hoop for mounting over gantry with 5 yrs warranty( Details specifications as per Annexure 1)

SITC of Strobe IR light which Support ambient brightness detection with steel hoop for mounting over gantry with 5 yrs warranty(Details specifications as per Annexure 1)

SITC of L2, Unmanaged, 6 × gigabit PoE RJ45 ports, 2 × gigabit Hi-PoE RJ45 ports and 2 × gigabit SFP fiber optical ports with 5 yrs warranty(Details specifications as per Annexure 11)

SITC of Terminal server for Traffic flow detection with 5 yrs warranty (Details specifications as per Annexure 3)

SITC of 5 MP Varifocal Bullet Network Camera with mounting bracket with 5 yrs warranty(Details specifications as per Annexure 4)

Panoromic Camera: Panoromic Camera: Eight 1/1.8" 4 MP progressive scan CMOS, Up to 2 × 5520 × 2400 at 30fps , Min Illumination: 0.0005 Lux at F1.6, 2.8 mm Focal Length, Privacy Mask, Supports people density detection in panoramic channel, Intrusion detection, line crossing detection, region entrance detection, region exiting detection, Support detecting the level of people density in the configured area, Tracking PTZ Camera: 1/1.8" 4 MP progressive scan CMOS, Up to 2560 × 1440 at 30fps, Min. illumination: Color: 0.0005 Lux at F1.2, 6.0 to 240 mm, 40 × Optical Zoom, 16 × Digital Zoom, IR distance: 250 m, Pan and tilt range: 360° (Pan), Pan Manual Speed: 0.1°/s to 210°/s, Pan Preset Speed: 240°/s, -15° to 90° (Tilt), Tilt Manual Speed: 0.1°/s to 150°/s, Tilt Preset Speed: 200°/s WDR 120 dB, Smart Tracking, Tripple Stream Configurable, Intrusion detection, line crossing detection, region entrance detection, region exiting detection, Face Capture, H.265, H.264 Video Compression, Alarm: 7-ch Input, 2-ch Output, Audio 1-ch Input, 1-ch Output, IP66, IK10, Built-in microSD slot, support microSD/microSDHC/microSDXC cards, up to 256 GB, UL/CE/FCC Certified.with mounting bracket with three yrs warranty (Details specifications as per Annexure 5)Approved Makes:- Pelco, Axis, Hikvision, Prama

4 MP 42 × Network IR Speed Dome: 1/1.8" progressive scan CMOS, 2560 × 1440 Resolution, Min illumination: 0.002 Lux at F1.2, 0 Lux with IR, 140 dB WDR, BLC, HLC, 3D DNR, Defog, EIS, 6.0 mm to 252 mm Focal length, 42 × Optical Zoom, 16x Digital Zoom, Pan: 360°, Tilt: -20° to 90° (auto flip), Pan configurable speed: 0.1° to 210°/s, Pan preset speed: 280°/s, Tilt configurable speed: 0.1° to 150°/s, Tilt preset speed: 280°/s, H.265, H.264, MJPEG Video Compression, Face Capture, Face Comparison, Motion Detection, Video Tampering Detection, line crossing detection, region entrance detection, region exiting detection, audio exception detection, Built-in memory card slot, up to 256 GB, Alarm: 7 in/2 Out, Audio 1 in/1 out, Smart IR up to 500 m, Power supply 24 VAC, Temperature: -40°C to 70°C, Humidity: ≤ 95%, IP67, IK10 (Details specifications as per Annexure 2)

SITC of NVR for Bullet, IR Speed dome, Panovu camera with 5 yrs warranty (Details specifications as per Annexure 12)

SITC of 8TB Surveillance HDD in NVR Approved Makes:- Seagate, WD, HP

Surveillance class Common Micro SD Card 128GB for camera (Details specifications as per Annexure 6)

SITC of Panic Alarm Station with 5 yrs warranty (Details specifications as per Annexure 7)

SITC of L2, Unmanaged, 6 × gigabit PoE RJ45 ports, 2 × gigabit Hi-PoE RJ45 ports and 2 × gigabit SFP fiber optical ports with 5 yrs warranty (Details specifications as per Annexure 11)

SITC of Hybrid SAN for the central storage with 5 yrs warranty(Details specifications as per Annexure 8)

SITC of 6 TB enterprises HDD Approved Makes :- Seagate, WD, HP

SITC of Video management software license with existing software and software should be from the same camera OEM with 5 yrs warranty(Details specifications as per Annexure 9)

SITC of Server for VMS (Details specifications as per Annexure 10)

SITC of 55" 4K, HDMI*2, VGA*1, USB2.0, USB3.0, build-in speaker, view angle 178'178' plastic casing, VESA, 7*24h (Details specifications as per Annexure 13) Approved Makes:- Panasonic,Samsung Hikvision, Prama, Sony

SITC of Web Managed 8 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 110W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control,STP/RSTP with 5 yrs warranty (Details specifications as per Annexure 14)

SITC of Gantry structure for SVD and traffic flow (Details specifications as per annexure 15)

SITC 48 F UG Armoured OFC with splicing, termination & HDPE Duct complete in all respect as per detailed specification at Annexure-A

SITC of LIU 6F at Pole mount Outdoor rack fully loaded complete in all respect as per detailed specification at Annexure-B

SITC of LIU 96F at Control Room fully loaded complete in all respect as per detailed specification at Annexure-C

SITC of Pole Mount Outdoor Rack complete in all respect as per detailed specification at Annexure-D

SITC of 1 KVA LI UPS in Outdoor Rack complete in all respect as per detailed specification at Annexure-E

SITC of 5 KVA online UPS in control room complete in all respect as per detailed specification at Annexure-H

SITC of 42 U Smart Rack in Control room complete in all respect as per detailed specification at Annexure-F

SITC of 4 Armoured Cat 6 cable with Patch panel at each pole complete in all respect as per detailed specification at Annexure-G

Digital Signage:

SITC OF UHD Smart Professional Signage Display with Web OS, Brightness 500nits, 1000000:1 Dynamic Contrast Ratio , 24/7 operation, HDMI, DP, DVI-D, RS232, LAN,USB, WiFI, Screen share, 8GB inbuilt Memory,IP5X Dust Proof Certified Design, Built-in Speakers, Narrow Bezel, Super Sign CMS compatibity, with 1.1 Ghz Quad Core CPU , Clear View with Non Anti glare Coating Certificates : UL,FCC , BIS

SITC OF Video Wall Controller with 8 nos. FHD HDMI output, 4 nos. FHD HDMI inputs, 16 GB RAM and 240 GB SSD, Intel Xeon processor, dual LAN,Single power supply, Windows 10 Pro 64bit, Wireless Keyboard mouse, Rack mount kit, 19" 4U chassis.

SITC OF The TV Shield is a universal Professional display enclosure for 43" TVs, Provides comprehensive water, dust, & tamper protection for commercial displays, The unit also features a guaranteed not to crack, thick, shatterproof front panel and vents with moisture screen that prevent heat buildup and intruders (big and small), Secured with two metal chambered and keyed locks which prevent theft, tampering and vandalism. Universal design - Works with any standard VESA mount; lightweight and easy to install. · 8-way tool-less micro adjustment provides quick vertical, horizontal and depth flush adjustment of display . Low profile design extends 3.96" (101mm) away from the floor · Highly secure frame hinges open for easy installation and maintenance access · Internal cable management system helps keep cables concealed and organized · Stand-alone kiosk enclosure or fully integrated with screen, media player, power and thermal management, etc. · High quality steel construction · Security hardware included · 75 lb total weight capacity

Audio PA & BGM System:

Horn Speakers: Long throw compression horn loudspeaker, 100 volt / 30 watts and 8 ohms / 45 watts, ABS plastic, cool grey SITC of IP66 rated ,Industrial Grade , high power speaker suitable to deliver clear audio reproduction in high noise environment with following specifications or better : The speaker shall have SPL (1W,1m):105dB or more with Low impedance power handling :45W@8ohm and inbuilt transformer : 30W,15W,7.5W.The speaker shall have coverage angle (HxV): 150 deg x 105 deg and max SPL : 119dB.The speaker shall integrated Steel or weather resistant ,corrosion resistant metal mounting bracket

Wall Speaker : 6.5"surface mounted speaker equipped with a high efficiency full range speaker and a multi tap 100 volt transformer (1.5-3-6 watts), all certified according EN 54-24. SITC of EN54 rated , wall mounted high power speaker with following specifications or better : The speaker shall have SPL (1W,1m):92dB or more with Low impedance power handling :6W@8ohm and inbuilt transformer : 6W,3W,1.5W.The speaker shall have coverage angle (HxV): 150 deg x 150 deg and max SPL : 101dB.The speaker shall integrated metal /Steel front grille.

Amplifier : 4 Channel class D amplifier 4 x 240 Watts (70/100 Volts or RMS @ 4 Ohms) or in bridge mode 2 x 480 Watts (70/100 Volts or RMS @ 8 Ohms), combined convection and fan cooling, 2 U, 19" rackmount Supply, Installation, testing and commissioning of Amplifier with following minimum specifications or better : High power Hypex Class-D amplifier,High thermal efficiency, Integrated APC limiter, Transformer : Toroidal, Input connections : 4 x unbalanced on RCA with passthrough + 4 x balanced on euroblock,Input sensitivity : 0 dBV / 1 V or less, Input impedance : 22 kΩ, S/N ratio : >101 dB A weighted or better, THD : < 0.07 %, Frequency response : 50 – 20kHz, Protection circuits : over current, over temperature, Channel separation : >68 dB @ 1 kHz, Power supply : 2Xswitching mode power supply, Cooling : temperature controlled fan, Bridged output power: 2x480W@100V etc complete required as per specifications.

Audio Output Interface Networked audio output expansion device with 4 line-level output channels, plus Emergency Message storage SITC of networked audio output expansion device with 4 line-level output channels.The audio output device shall be designed in such a manner that provide audio and control by Layer-2 protocol . It shall have Local storage of Emergency Messages in non-volatile memory, receive Power over Ethernet (PoE) utilizing a single (CAT5) network cable to a rear panel RJ45 connector. The output device shall provide four removable terminal block connectors for linelevel audio outputs, four control inputs, and four control outputs. It shall have channel-to-channel and device-to-device failover,local non-volatile storage of Emergency Messages,dual PoE capable with alternate powering from auxiliary 24V DC supply (dual inputs), Page Active Relays, Control Inputs, and Control OutputsThe audio output device shall provide local digital audio signal processing and local storage of configuration data,signal processing including volume control, filters, compressor/limiting, delay, speaker equalization. The audio output device shall indicate signal and clip with LEDs on the front panel

Message Server Enhanced Networked Messaging Processor SITC of networked messaging processor. The Playing live & Pre-recorded server shall networked based & to be rack mountable in one rack space (1RU) and shall support advanced paging functionalities such as recorded message storage and playback, system configuration storage, event scheduling, time server support, storage of logged system data, VoIP triggered paging, email notification, and remote third party control capability. The processor shall feature a status LED and separate ports for TCP/IP Control and networked based Layer-2 or above protocol . The message Server shall be CE marked and shall be compliant with the RoHS directive.

Paging Station Emergency Wall-mounted Paging Station, 10 Buttons with hand-held microphone (EN 54-16 certified) SITC of EN 54-16 certified wall-mounted paging station to provide paging audio and network control data via network cable and using PoE power from RJ-45 connector. It shall have 10 or more buttons with mutliple functions e.g .direct page ,zone recall etc. It shall provide multi level paging priorities functions and facility for override, store and forward, and keypad lock-out . It shall have inbuilt DSP ,data storage. It should have LED/LCD backlit screen, access via special code ,sutiable to work in high noise area with inbuilt noise-cancelling microphone. It shall be CE, RoHS compliant and EN 54-16 certified.

Audio Input Interface Networked audio input device with 6 channels of BGM or user configurable mic/line audio SITC of networked audio input expansion device .The audio input device shall provide audio and control via networked based Layer-2 or above protocol. It shall receive Power over Ethernet (PoE). The audio input device shall provide four sets of dual RCA connectors plus removable terminal block connectors for line-level inputs, two microphone/line inputs with phantom power, four paging inputs, six Rj45 outputs, four control inputs, and four control outputs. Software-configurable local audio signal processing including gain, filters, and compressor/limiter. The input device shall indicate signal and clip with LEDs on the front panel. The input device shall be CE marked and shall be compliant with the RoHS directive. Approved makes : Biamp, Baldwin Boxall,Mediamatrix,BOSE or equivalent

Audio Player Versatile DAB+ and FM RDS / CD / USB / SD-card /Bluetooth music source, RS232 control, IR remote included, 1U, 19" SITC of professional multisource CD/USB/SD-card music player with unbalanced outputs 2 x RCA + COMBI RCA, integrated FM RDS and tuner with RS232 control, IR remote included, rack mountable.

Bidder Name

Amount

RACHANA CONSTRUCTION CO.(GSTN-08AACFR0292F1ZD)

JCC INFRAPROJECTS PVT. LTD.(GSTN-08AADCJ2597D1ZI)

ARSS Infrastructure Projects Ltd(GSTN-NA)

ARSS Infrastructure Projects Ltd

RACHANA CONSTRUCTION CO.

JCC INFRAPROJECTS PVT. LTD.

RACHANA CONSTRUCTION CO.