GRASS CUTTING FOR THE RUNWAY, PTT AND DISPERSAL AREAS AT TECH AREA UNDER GE (AF) HASIMARA

Amount

Labour and T&P for cutting grass by mechanically operated slasher including removing of material upto a distance exc 250m & n.exc 500m, obtained from cutting & cleaning, (from the concrete edges), complete all as specified and directed. (Note : (i) Mechanical slasher (i.e.set of one tractor & Jungle Jim) with POL & MT driver shall be arranged by the Contractor and quoted rates shall deemed to be inclusive all provisions. (ii) The mechanical slasher shall be operated from 0900 hrs to 1700 hrs including lunch break of half an hour, excluding Sundays and holidays on requirement basis. (iii) Minimum output of one mechanical slasher shall not be less than 4000 sqm per day (grass cutting clear area). (iv) Attendance register shall be maintained by the Engg in Charge for operation of this item and shall be submitted to GE duly signed by contractor, JE and Engg in charge while processing payment of RAR).

Labour and T&P for cutting of grass by bush cutter operated slasher including removing of material upto a distance exc 250m & n.exc 500m, obtained from cutting & cleaning, (from the concrete edges), complete all as specified and directed. (Note : (i) Bush Cutter with POL & operator shall be arranged by the contractor and quoted rates shall deemed to be inclusive all provisions. (ii) The bush cutter shall be operated from 0900 hrs to 1700 hrs including lunch break of half an hour, excluding Sundays and holidays on requirement basis. (iii) Minimum output of one bush cutter shall not be less than 250 Sqm per day (Grass cutting clear area) . (iv) Attendance register shall be maintained by the Engg in Charge for operation of this item and shall be submitted to GE duly signed by contractor, JE and Engg in charge while processing payment of RAR).

Cutting/Scraping grass/wild growth and all vegetation etc manually around the runway light etc, stacking into heaps and removing off from the premises upto a distance exceeding 250m & n.exc 500m, complete all as specified and directed. (Note:- The work shall be carried out on requirement basis during the contract period.)

S & F Sign board rectangular in shape made out of 1mm thick MS plate of size 0.90Mx0.80m (approx) fixed to MS hollow pipe of size 45mmx45mm, 02 Nos, of length 1.50m above GL and 0.45m below GL embeded in and including PCC (1:2:4) type B-1 of size 0.45x0.45x0.60m and necessary earth work, excavation etc complete and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surface, writing letters/arrows etc of 6 inch height made out of fluorescent strip and fixing on each outer face of sheet with approved adhesive including dismanting of existing sign board of any size and description, complete all as specified and directed.

S & F Sign board rectangular in shape made out of 1mm thick MS plate of size 0.90Mx0.90m (approx) fixed to MS hollow pipe of size 45mmx45mm, 02 Nos, of length 1.50m above GL and 0.45m below GL embeded in and including PCC (1:2:4) type B-1 of size 0.45x0.45x0.60m and necessary earth work, excavation etc complete and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surface, writing letters/arrows etc of 6 inch height made out of fluorescent strip and fixing on each outer face of sheet with approved adhesive including dismanting of existing sign board of any size and description, complete all as specified and directed.

S&F in repair fluorescent strip for writing letter/arrows etc of size 6 inch height, fixed to each outer face of sign board with approved adhessive, complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness, below or above ground level and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

M&L for hard core of gauge n exc 63mm of broken store or boulders deposited, spread in layers n exc 15cm thickness , watered and rammed to a true surface, complete all as specifieed and directed

M&L for 100mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of path, hard standing etc. complete all as specified and as directed.

M&L for 100mm thick plain cement concrete(1:2:4) type B-1 (using 20mm graded crushed stone aggregate ) as in flooring or hard standing etc (cast in altrnate bay incliding white wash on adjacent face of hardened concrete after removal of formwork), surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Dismantling bricks (laid flat or on edge) laid,bedded and pointed in cement mortar as in floors, channels,kerbs aprons,etc (each layer), complete all as specified & directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m,complete all as specified & directed.

M&L for brickwork, laid flat with old size sub-class 'B' bricks locally available best quality bricks, bedded and jointed in CM (1:6) and pointed in CM (1:3), complete all as specified and directed.

All as per item No.13 here-in before but except bricks, complete all as specified and directed.

M&L for brickwork, laid on edge in floors with old size sub-class 'B' bricks locally available best quality bricks, bedded and jointed in CM (1:6) and pointed in CM (1:3), complete all as specified and directed.

All as per item No. 15 here-in-before but except bricks, complete all as specified and directed.

M&L for brick work with sub-class 'B" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4), complete all as specified and directed.

M&L for brick work with sub-class 'B" bricks, straight or curved on plan exc 6m mean radius in one brick thick walls built in cement mortar (1:6), complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary formwork, complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate as in copings, bed plates etc, complete all as specified and directed. Note: An amount of Rs. 1680.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. VINITA CONSTRUCTION

M/S I P GROUP

M/S MANODEEP CONSTRUCTION

M/S SARKAR ELECTRIC

SHRI D P AGARWAL

M/S SANMILAN NANDI

M/S BISHAL ENTERPRISES