Construction of pubic convenence and tourist facilitation building at liktsey

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Earthwork in excavation by mechanical means (Hydraulic excavator)over areas (exceeding 30cm in depth,1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto1.5m, as directed by Engineer-in-charge.

Dumping of stone including cost of stones in horizontal on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5 (1:4:8) grade, with 40mm nominal size of stone aggregates). Crushed

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement of R.C.C work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete. TMT bars

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)

Centring and shuttermg including strutting, propping etc. and removal of form for· a) Foundations: footings, bases of columns etc. for mass concrete.

b) Lintels, beams, plinth beams, girders, bressumers and centilevers.

c) Suspended floors, roofs, landings, balconies and access platform.

d) Columns, Pillars, Piers, Abutments, Posts and Struts

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. second class kail wood 35mm thick

Providing and fixing of Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm

Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with 2nd class kail wood

French spirit polishing with Two or more coats on new works including a coat of wood filler

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1Osqm

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and placing on terrace (at all floor levels) polyethylene Puff water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sitex, Electroplast, Star, Lotus or equivalent having valid lSI license. - Including puffing,insulation, rockwool, nitrile, of tank and insulating of outlet up-to 15 meters. Complete job.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing CP Jali of approved make.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls wherever require :, White Vitreous China wash basin size 630x450 mm with single 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing brass bib cock of approved quality. 20 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931:15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe 32mm

Providing and fixing un-plasticized PVC connection pipe with brass unions. 45 cm length 20 mm nominal bore

Providing and fixing CP brass toilet paper holder having (ISI marked)

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.

Providing and fixing mirror of superior glass (of approved quality) and of requiredshape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Circular shape 450mm dia.

Providing and fixing S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 75 mm dia complete job. (a) 75mm dia. Or 3"

S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: (b)100 mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work incl. cutting chases and making good the walls etc. (a) Pn-16 pipe, 40mm 0D 1.5"

(b) Pn-16 pipe, 25mm 0D 1"

Providing and fixing insulation work on PPR pipe by using nitrile tube taping with cello tape, Rock wool 6inch, wire mesh, polythene, taping with cello tape, aluminium sheet 26 guage cladding with dia complete job including carriage 40mm (External pipe)

Providing and fixing insulation work on PPR pipe by using thermocol flex/K flex and taping over pipe complete job 25mm (Internal pipe)

Providing and fixing heat tape 33watts made of denforced or chromolex or eq. make as approved, complete job

Providing and fixing Thermostat Automatic Timer all complete job

Providing and fixing ball valve (brass) of approved quality complete : High or low pressure with plastic floats: 25 mm nominal bore

Providing and fixing water heating geyser of capacity 25 liter of approved make.

ELECTRICAL WORK : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connection but excluding modular lates as requireda a) 5/6 Switch

b) 3 pin 5/6 a socket out let

c)supply and fixing 3 pin supply and fixing 5 A ceiling rose on the existing junction box/wooden block

c) Supply and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 and 15/16 A modular socket outlet and 15/16 A modular switch, connection etc as required

Supplying and fixing suitable size GI box with modular in front on surface or in recessed including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connection etc as required

supply and fixing following way horizintal type 3 pole and neutral, sheet steel , MCB distribution volt 415V on surface / recess complete with tinned copper bus bar neutral bus bar ,earth bar, tin bar, interconnection, power painted including earthing etc as required ( but with out MCB/RCCB/Isolator , 8 way(4+24) double door

Supply and fixing 5A to 32 A rating 240/415V ,10KA ,C curve ,miniature circuit breaker suitable for inductive load of following poles in the existing MCB,TB completed with connection , testing and commessioning etc as required single pole 6/16AMP

Supply and fixing of PVC conduit along accessories in surface walls and making good the same in case of recessed conduit as required.25 mm

supply and laying 25 mm x5 mm GI strip at 0.50Mtr below ground as strip earth electrode incl connection / terminating with GI Nut bolt,spring,washer etc as required(Jointing shall be done by over laping and with two set of GI nut bolt and spring washer (Spaces at 50 mm

supply and fixing 25 mm x5 mm GI strip on surface or in recessed for connection etc as requireds

Supply and fixing MCCB in cubical panel board providing and fixing following rating and breaking capacity MCCB FP in existing cubical panel board including railing of holes in cubical panel and making connection ect as required (make as per annexure enclosed)

Wiring for light point /fan point /exhause fan point /call bell point with 1.5 sqm FRLS PVC insulated copper conductor single pole cable in surface./Recessed medium class PVC conduit,with modular switch,modular plate,suitble GI box and earthing the point with 1.5 Sqm.FRLS PVC insulated copper conductor single pole cable etc as required

wiring for circuit/sub main wiring along with earth wire with following sizeof FRLS PVC insulated copper conductor ,single core cable in surface/recessed medium class PVc conduit as required53.2x2.5 sqm +1x2.5 Sqm earth wire

2.16 Sqm+1x10 Sqm earth wire

2x10 Sqm +1x6 Sqm earth wire

Supply and dwawing following sizxze of FRLS PV insulated copper conductor ,single core cable in the existing surface /recessed steel /PVC conduit as required 56.1x1.5 Sqm

MCCB FP 250AMP 36 KA

Supply and fixing LED type doqn loghter 15 Volt LD -95-141-XXX-65 GI Wipro equivalent

Supply and drawing co axel TV cable RG grade 0.7 mm solid copper conductor PE insulated shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required

Providing and fixing fan box

Providing and fixing concealed box

Carriage of materials by mechanical transport Cement and steel from avg lead of 50 km

Sand from avg lead of 30 kms

Stone aggregate from avg lead of 30kms

Stone from avg lead of 30 kms

Please Enable Macros to View BoQ information