SPECIAL REPAIRS TO BLDG. NO P-11 ROOF TREATMENT AT SIGNAL OFFICERS MESS 127 THE MALL OF 11 CSR AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed

All as per Srl item No. 1.00 here-in-before but hard/ dense soil

Excavation in trenches in soft/ loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

All as per Srl item No. 3.00 here-in-before but hard/ dense soil

Excavation in post holes (or similar holes) each n. exc. 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm and removing surplus soil to a distance n. exc. 50m and making good the surfaces complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 metre mean radius and built in cement mortar (1:6) complete all as specified and directed.

Material and labour brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25 cm thick each layer complete all as specified and directed.

Speading and leveling in layers n.exc 25cm thick and well ramming inlcuding watering complete all as specified and directed

Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soils) to a distance exc 250m but n. exc. 500m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Material and labour for steel ventilator with top hung shutter including hinges, steel peg stay including taking down old unserviceable steel window complete all as specified and directed

Material and labour for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

Material and labour reinforced cement concrete (1:1½:3) type A-1 mix using 20mm graded stone aggregate as in slabs supported on wall, beams and columns in floor, roof, landing, balconies, canopias, deck slabs and in shelve and the like complete all as specified and directed.

Material and labour reinforced cement concrete (1:1½:3) type A-1 mix using 20mm graded stone aggregate as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to soffit and sides of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat & fair finished surfaces of concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for rendering 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

Material and labour for 10mm thick cement mortar (1:4) on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour for rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered or un-plastered surface of walls including cornices, pilasters etc. and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base etc.; concrete surfaces finished fair and even and prepared to receive floor finish complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection/ path complete all as specified and directed.

Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in floor finishes/ plinth protection laid in alternate bay n.exc 2m in length each bay including cutting groove of 6mm wide and 10mm deep filled with bituminous mastic, finished fair and even complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.

Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.

Material and labour for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as directed .

Material and labour for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 400 x 400x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 300 x 450 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 300 x 200 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Supply and fixing 15mm bore galvanised steel tubes, light grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Supply and fixing 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

All as per item No. 40.00 here-in-before but including taking down of existing tubing and connections all as specified and directed

Supply and fixing 20mm bore galvanised steel tubes, light grade with & including all fittings laid in trenches etc complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, 500 liter capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified and directed in SSR Part I, fixed complete all as specified and directed.

Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repair complete all as specified and directed

Supply and fixing body bib cock (Foam flow) with flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed Make : Jaquar Cat Part No. OPP-15037PM or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing 2 way bib cock (foam flow) with flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed Make : Jaquar Cat Part No. OPP-15041PM or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing centre hole basin mixer with popup waste with 450mm long braided hoses suitable for fixing to 15mm bore GI pipe complete all as specified and directed Make : Jaquar Cat Part No. CON-169 KNB or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing angular stop cock with wall flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed Make : Jaquar Cat Part No. OPP-15053PM or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing brass chromium plated tubular towel rack with lower hanger (stainless steel) with hook fixed in repairs complete all as specified and directed. Make : Jaquar model No. AHS-1581H or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing hand shower (health faucet) with 8mm dia 1.2 mtr long flexible tube & wall hook suitable for fixing to 15mm bore iron pipe complete all as specified and directed Make : Jaquar Cat Part No. ALD-573 or equivalent to Group 1 of Appendix 'B' of Particular specification

Supply and fixing CP jet spray with holder for EWC 1.5m long complete all as specified and directed

Supply and fixing coloured PVC toilet cabinet made out of size 450 x 450 x 90mm with looking mirror 450 x 450mm fixed on the shutter and with suitable shelving arrangement complete all as specified and directed

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 125mm wide with chromium plated bracket guards and railing 60cm long complete all as specified and directed.

Supply and fixing Acrylic corner shelf (with chromium plated bracket) 3 in set of shelf 8mm thick with and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified and directed. Make: Jaquar Cat No. CAN 1173 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing soap dish stainless steel chromium plated with brass screws and rawl plug complete all as specified and directed. Make : Jaquar model No. AKP-35731P.or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified.

Supply and fixing toilet paper holder of chromium plated with flap fixed to walls and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified. Make: Jaquar (Continental Accessories) Cat No. 1153N or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing single piece WC with UF seat cover, hinges, fixing accessories set, cistern fittings of size 355 x 655 x 760 with P/S trap including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc complete all as specified. Make: Jaquar Cat No. LYS-WHT-38851S or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing counter wash basin of size 420mm x 590mm x 195mm oval shaped complete all as specified and directed. Make : Jaquar Cat No. CNS-WHT-705 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing new flexible PVC waste pipe of approved quality 32mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed

Supply and fixing brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.

Supply and fixing Prayag Syment tower bolt 200mm long all as specified and directed.

Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.

Supply and fixing cast iron floor trap with grating including jointing to waste pipe in run lead joint fixed in cement concrete type (1:2:4) type B-1 diameter of outlet 75mm, complete all as specified and directed.

Supply and fixing PVC (SWR) floor trap with mild steel CP grating including jointing to waste pipe with solvent cement 75 mm dia of outlet fixed in repairs all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.

Supply and fixing PVC (SWR) junction single (Single T) 110mm bore equal or unequal with access door complete all as specified and directed.

Supply and fixing PVC (SWR) junction single (Single T) 75mm bore equal or unequal with access door complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) vent cowl 75mm bore all as specified and directed.

Material and labour 125 x 110mm PVC (SWR) gully trap setting and jointing with solvent cement fixed in repairs complete all as specified and directed.

Material and labour for cutting openings, through brick walls built in cement or lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore etc to store and rubbish n.exc 50m complete all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete coloured inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 40mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note : The sample shall be got approved from the GE before buld procurement and lots shall be got tested independently by the GE

Material and labour for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in filling in bed block complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges of interlocking tiles complete all as specified and directed

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed

Material and labour chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour PCC tiles 250x250x22mm laid over 15mm thick screed bed, set jointed and pointed in neat cement slurry with grey and pigments complete all as specified and directed.

Material and labour for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour for salt glazed stone ware drain pipes 150mm bore laid in trenches on concrete bed to required slope, jointed and tested complete all as specified and directed. Note : Concrete bed shall be measured and paid for separately

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but n. exc. one brick complete all as specified and directed.

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall n.exc. 150Sqcm complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc complete all as specified and directed

Material and labour for brushing neat cement slurry with 2.75 kg of cement per sqm complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in foundations, filling and mass concrete, roof padding etc. (average thickness 50mm) complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Material and labour for bitumen primer for use in waterproofing and damp-proofing treatments @ 0.3 ltr/ Sqm complete all as specified and directed

Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over the roof surface including cleaning surfaces complete all as specified and directed

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed

Material and labour for brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

Material and labour for flush pointing to brick terracing tiles in cement mortar (1:3) complete all as specified and directed.

Material and labour mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets, sag rods (for securing chain link fencing etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fixing MS chain link fencing 10 guage thick galvanised steel wire and 50mm x 50mm size mesh fixed to steel fencing post by nut & bolts etc including provision of binding wire complete all as specified and directed

Supply and fixing structural framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with end including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-W (Gde-E-250) quality A, complete including two coats of synthetic enamel paint over a coat red oxide primer all as directed

Supply and fixing mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut approved by Engineer-in-Charge complete all as specified

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing rolled section as in main and cross beams, hip and jack rafter, purlins, connected to common rafters, fixed with cleats and plates etc conforming to Fe-410-W (Gde-E-250) quality 'A' including one shop coat of zinc chromate primer paint including preparation of surface before fabrication all as specified and directed.

Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment Fe-410W (gde-E-250) complete all as specified and directed

Supply and fixing Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fixing in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight- 90 gms) complete all as specified.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour for 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Material and labour galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixed complete all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth without using extra cement complete all as specified and directed

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe, fixed in repairs complete all as specified and directed.

Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.

Supply and fixing brass chromium plated tower ring 15cm dia, fixed in repairs, complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut measured) complete all as specified and directed

Material and labour for point wiring for one light/fan point controlled by one switch with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing surface/ concealed conduit and accessories and terminated in and including new sunk type pressed steel terminal switch boxes 1.6mm thick with plastic laminated bakelite sheet top cover 3mm thick make hylum fixed with nickel polished brass screws with washers and including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed.

All as per srl item No. 128.00 but 3 pin 15 Amp socket outlet with 2.5 sqmm PVC insulated FRLS copper cable and 2.5 sqmm PVC insulated FRLS copper cable for continuous earth continuity conductor all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 230 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing switch piano flush type, 15 Amps, 230 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing socket outlet multipurpose 3 in 1, 6 pin, 15 Amps, flush type complete all as specified and directed

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified and directed.

Supply and fixing exhaust fan metallic body, 300mm sweep, 900 RPM, single phase, 230 Volt, heavy duty with louvered shutter including provision of three core copper conductor cable of required length of size 23/ 0.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nuts, bolts & washers complete all as specified and directed

Material and labour for making opening for exhaust fan of size 300mm dia by cutting of wall of any specification including finishing surface and rendering complete in cement mortar 1:4 10mm thick including making good to all disturbed surfaces and matching the same with existing specification complete all as specified and directed

Supply and fixing in repair energy saving LED luminaries comprising of extruded aluminium housing high quality PC diffuser, reliable and robust housing structure, slim integrated design easy to install, 125 Lumens/ Watt 4 feet, 18 to 20 watt 124 volts AC supply to be fixed on PVC square boxes (02 Nos) complete prewired including connection & testing all as specified and directed

Material and labour for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part-I (2009) and connected to panel board, all as specified and directed and testing on completion including provision of earth wire 4mm dia duly protected with and including 15mm dia bore medium grade GI pipe upto 7.5m from electrode to earth point including provision of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC (1:3:6) type C-1 as in earth chamber, 50mm thick RCC cover using cement concrete (1:2:4) type B-1 reinforced with & including 8mm dia mild steel TMT bar @ 100mm c/c both ways with suitable handle for lifting & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified and directed. Note: On testing, after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department.

Supplying, laying, jointing and testing and commissioning of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core complete all as specified and directed.

Material & labour for sand cushioning with 8cm thick layer before laying of cable and 15cm thick layer after laying of cable in trenches complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed.

Supply and fixing GI pipe light grade of size 40mm dia bore for protection of cable under road, along the pole or under floor including fittings complete all as specified and directed

Material and labour for MCB SPN 20 Amps, 10 KA, B-curve complete all as specified and directed.

Material and labour for MCB SP 10 Amps, 10 KA, B-curve complete all as specified and directed.

Material and labour for sheet metal enclosure for DBs when MCBs to be used, SPN 4 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside with neutral and earth connection bar prewired complete all as specified and directed.

M/S Vinod Kumar

KARTIK BUILDERS