Rep maint of lightening conductor distr boxes with MCCB LED display flood security lights and other luminaries alongwith services cables etc and ATC and hangers of 663 R and O at Stg Grn underAGE (I) CIF (K)

Amount

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete including fittings such as switches, sockets, bell pushes, ceiling roses, pendants/batten holder, call bell, fan, regulators, tube light fittings, bulk head etc. also making good the disturbed surface of wall/floor/ceiling and also making good the disturbed surface of wall, floors etc complete all as specified and directed.

M&L point wiring with 1.5 Sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade and including PVC casing caping/ conduit pipe of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6mm thick MS sheet concealed on wall or on surface of wall as per site requirement and making good disturbed surface of wall, covered with 3mm thick plastic laminated sheet for one light point/ fan point/ bell point controlled by one, one way switch, complete all as specified and directed.

S&F Switch piano, flush type, 6 Amp, One way complete all as specified and directed.

S&F in replacement Sheet metal enclosure factory made (double door) shutter type for MCB DB TPN, Horizontal type, 4 ways , 440 Volts with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.

S&F in replacement Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN 12 ways , 240 Volts with 200 Amps rated bus bar, neutral link, earth bar complete all as specified and directed.

S&F in replacement Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN 8 ways, 240 Volts with 200 Amps rated bus bar, neutral link, earth bar complete all as specified and directed.

S &F in replacement MCB SPN 40 to 63 Amp, 10 KA, 240 Volts, complete all as specified and directed.

S &F in replacement MCB SP 6 to 32 Amp, 10 KA, 240 Volts, complete all as specified and directed.

S&F in replacement round/ square shape, 15 Watt 220 Volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in replacement LED luminaire 600mm x 600mm, 35/36 watt, 220 volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F in replacement LED radioso high bay energy saving environment friendly & robost open highbay LED suitable for ceiling (surface/ suspended) nominal wattage - 150 Watt, voltage- 240 Volts, CCT (K)-5700K, CRI>70, IP-66 operating temperature = -10 degree to 50 degree. Diffuser made of high grade toughened glass, housing high pressure die cast aluminium housing efficiency - 125 lumens/ W, Internal surge protection 4 KV to 10 KV, swirl fin structure for good air circulation aiding in great heat dissipation, complete all as specified and directed.

S&F in replacement LED saucer high bay energy saving environment friendly & robost open highbay LED suitable for ceiling (surface/ suspended) nominal wattage - 150 Watt, voltage- 240 Volts, CCT (K)-5700K, CRI>70, IP-66 operating temperature = -10 degree to 50 degree. Diffuser made of high grade toughened glass, housing high pressure die cast aluminium housing efficiency - 125 lumens/ W, Internal surge protection 4 KV to 10 KV, swirl fin structure for good air circulation aiding in great heat dissipation, complete all as specified and directed.

M&L in replacement Sub main wiring of two single core PVC insulated and unsheathed cable with 6 sqmm FLRS multi-stranded copper conductor drawing in PVC casing caping/ PVC conduit of suitable size as per site requirement including PVC bend, corner junction etc with 6 sqmm PVC unsheathed copper conductor (multi-standard) as continuous earth wire, complete all as specified and directed. Notes :- (a) Phase should be red/ yellow/ blue, neutral should be black and earthing wire should be green in colour. (b) Two runs of cable for phase/ neutral and one run of cable for earth including conduit will be measured and paid as one unit length.

M&L in repairs fixing Air termination lightening conductor single pointed copper rod 12mm dia and 300mm long fixed properly on top of the Hangers/ ATC building, complete all as specified and directed.

M&L in repairs making of test point terminal clock made out of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexa head screw, compete all as specified and directed.

M&L in repairs fixing of copper strip of size 20mm x 3.15mm thick with and including saddles and fixing screws etc for roof conductor or down conductor above ground complete all as specified and directed.

M&L earthing complete with copper earth plate electrode of size 600x600x3.15mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below from normal ground level), connecting to the copper earth strip of size 20x3mm by means of bolts, nuts, check nuts and washers of galvanised iron and earth lead protected by 40mm bore GI pipe, light grade including provision of concrete pit in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) with 40mm thick cover of RCC (1:2:4) type B-1, reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x3mm and with 6mm dia MS bar handle, made to shape, 20mm bore GI light grade pipe for watering pipe, placed on top edge of earth plate and including common salt and charcoal filling, test point with fixing arrangements, funnel, wire mesh and earth work in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 mtr, complete as per electrical plate No. 3 of MES SSR Part-I (2009), complete all as specified and directed. Note :- The earthing will be tested after completion, if desire results not achieved, the contractor shall redo the earthing and rates for the same shall be deemed to include in the quoted rates.

S&F in replacement MCCB 4 pole, 415 Volts, 4 pole, adjustable type, 250 Amps with breaking capacity 36 KA, complete all as specified and directed.

S&F in replacement MCCB 4 pole, 415 Volts, 4 pole, adjustable type, 160 Amps with breaking capacity 36 KA, complete all as specified and directed.

S&F in repairs XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 25 Sqmm 3.5 core in trenches, through pipe, under culvert or in air, complete all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, laying of cables, erection of poles, stays etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing surplus excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

M&L dry river sand, laid in trenches for cable protection, as 15cm thick below the cable and 8cm thick above the cable, complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

M&L sub class 'B' brick, old size, as in coverings, protection to the eletric cable, laid dry, flat, transversally along the length of cable on sand cushioning with width equal to length of brick, complete all as specified and directed.

S&F in replacement of MCCB 4 pole, 440 Volts, 125 Amps rating capacity in 16 KA, complete all as specified and directed.

S&F in repairs integral LED aviation light luminaire comrising of yellow painted LM6 aluminium alloy housing polycarbonate enclosure, complete all as specified and directed.

Supply, fixing & laying in repairs GI pipe light grade 40 mm bore in trench, under floor, wall and on pole for cable protection, complete all as specified and directed.

Notes :- An amount of Rs. 33045.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

JK BUILDERS AND ENGINEERS (BID ID -3429031)

M/S SHEIKH FEROOZ AHMAD (BID ID -3428243)

CLASSIC JK SUPPLIERS (BID ID -3428846)

YATTOO ENTERPRISES (BID ID -3428704)

M/S N A Enterprises (BID ID -3429313)

Nationalconstruction (BID ID -3434983)