ADDN/ALTN AND SPL REP TO DSC OFFICE NEAR MAIN GATE AT NSD, MANKHURD, REPLACEMENT OF 01 OUTER GATE AND 02 INNER MAIN GATES WITH FALSE CEILING AT WED AND PROVN OF STORM WATER DRAIN BEHIND MAP BLDGS AT SPDC COLONY UNDER GE (NW) MANKHURD

Amount

Notes : (i)The contractor should be in possession of valid electrical license to execute electrical works. (ii) Supervisor for execution of electrical works/ electrical component of works employed by the contractor shall possesses supervisor certificate of competency issued by concerned State Government/ Union Territory and the worker/ tradesmen for execution of electrical works/ electrical component of works shall hold necessary permit issued by concerned State Government/ Union Territory. Excavation in post holes (or similar holes) each n. exc. 0.50 CUM as in average soil and removing surplus soil and making good disturbed surface etc complete all as specified and directed.

M&L for plain cement concrete, 1:3:6, type C-2 (using 40mm graded aggregate) as in foundations filling mass concrete etc complete all as specified and directed.

S & F Fe 410 W (Gde E 250) Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S & F Fe 290 W (Gde E 165) as in posts and struts including all necessary drilling, bolting or riveting, etc.,and similar work etc complete all as specified and directed.

S & F Fe 410 W (Gde E250) Plates (plain or chequered)channels, square cut or notched (ordinary and counter sunk) etc complete all as specified and directed.

Dismantling asbestos sheets / metal sheets corrugated, semicorrugated etc sheets in roof covering, cladding etc and stacking for issuing under Sch. of credit.including scaffolding and necessary safety arrangements etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paint over & including a coat of red oxide zinc chrome on new steel surfaces over 10 cm width or girth including preparation of surface etc complete all as specified and directed.

M&L for treating with tar or coal tar black paint on ends of posts area exc 0.10 Sqm but not exc 0.5 Sqm each etc complete all as specified and directed.

Supply & fixing gypsum ceiling tile consisting of 600x600 mm size 12 mm thick with PVC lamination on the face side and metalized polyester film on backside as granular pattern of saint gobain or equivalent which shall be laid on and including GI Armstrong grid systems with 24mm Prelude 32 mm wide T - section flanges colour white having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees complete all as specified and directed:- (a) INSTALLATION: (i) To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using Armstrong suspension system (specifications given below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall. (ii) Flush fitting 1200mm long cross tees shall be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm shall be provided with independent support. 600x600mm module shall be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. (iii) Perimeter trim shall be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. (b) ARMSTRONG SUSPENSION SYSTEM : Accessories manufactured and supplied by Armstrong World Industries consisting of MS Anchor Fasteners with Vertical Hangers made of Galvanized steel of size 26 x 26 x 25 x 1.2mm with a Galvanized Thickness of 80gsm shall be used, A pre Straightened Hanger wire of dia – 2.65 mm of 1.8 m length, with a Galvanized thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.68 mm shall be provided. The adjustable clip also consists of a 3.5 mm aquiline wire shall be used with the main runner etc complete all as specified and directed. Notes : 1. The above suspension ceiling (incl grid system) shall be of make ARMSTRONG as specified above or equivalent of make Saint gobain 2. The contractor's quoted rates shall also be deemed to include for making/ cutting opening in the ceiling of the required size and shape for fixing light fitting, cat walk and provision of neccesary scaffolding etc, complete all as directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water complete all as specified including necessary scaffolding and safety arrangement etc complete all as specified and directed.

M&L for 20mm (12+8mm)thick in two coats polymer modified ready mix cement based plaster on the wall surfaces complete all as specified and directed. Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemed to be included for the provosion of dubbing of the surface and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements

M & L for preparation for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces etc complete all as specified and directed.

M & L for preparation for applying one coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over old surfaces etc complete all as specified and directed.

M & L for rendering 12mm thick using polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed. Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemed to be included for the provosion of dubbing of the surface and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements

M&L for preparation of new plastered surfaces on walls, preparation for distempering and applying two coat of oil bound distemper over and including a coat of primer including stopping of nails holes, cracks etc with minimum 1 mm thick white cement based wall care putty as a leveling course for obtaining plain surface etc finished even and smooth complete all as specified and directed

M&L for complete removal of existing treatment by washing, rubbing down and stopping of old decorated surfaces on walls, preparation for distempering and applying two coat of oil bound distemper over and including a coat of primer including stopping of nails holes,cracks etc with minimum 1 mm thick white cement based wall care putty as a leveling course for obtaining plain surface etc finished even and smooth complete all as specified and directed Note : The rate of above item is inclusive of all patch work repair with 3mm putty where ever required.

Demolition of concrete in ground floor and pavings n exc 15 cm thickness etc complete all as specified and directed.

M&L broken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled and well rammed in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed.

M & L for 75 mm thick cement concrete type D2 1:4:8 (40 mm graded aggregate) as in flooring or subbase etc complete all as specified and directed.

M & L for 18-20 mm thick machine cut and pre polished kota stone slab flooring with green marble strip of 10 cm width over & including 15mm thick in CM (1:6) cement screed base laid and jointed with grey cement slurry and pointed with cement slurry mixed with pigment to match the shade of the slab, complete all as specified and directed.

M&L for Machine pressed precast concrete coloured interlocking 60mm thick precast cement grade M-35 with grey cement and pigment having compresive strength 35 N/mm2 laid with over and including sand cushinig of average thickness 25mm after consolidation set and level the tiles on proper level with interlocking complete all as specified and directed.

Surface excavation n exc 30 cm in depth and 15 cm average depth and getting out in any type of soil etc complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil etc complete all as specified and directed.

M&L for providing 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm wide joints (at an interval of 3 m and turnings) duly filled with fine sand and bitumen in the ratio of 3:1 ,complete all as specified and directed.

M&L for Pre cast cement concrete block masonry with solid block of grade(C-5) having block density not less than 1800 Kg/cum, exc, 10cm in width and setting in CM 1: 6, complete all as specified and directed.

M&L for plain cement concerete 1:2:4 type B2 (40mm graded aggregate) in surface channels and drains etc complete all as specified and directed including necessary formwork.

M&L for plain cement concerete 1:3:6 type C1 (20mm graded aggregate) in coping etc ,including weathering ,slightly rounded or chemfered angles and throating,as directed including necessary formwork etc complete all as specified and directed.

M&L for extra for forming fair finished drain or channel inner girth 45 cm in cement concrete,using extra cement,including forms, moulds,mi-tred/stopped ends etc and complete all as specified and directed

Removing excavated material n.exc 50 mtr and depositing where directed etc complete all as specified and directed.

Returning,filling in,including spreading, levelling,watering and well ramming in layers n.exc 25cm thick in soil etc complete all as specified and directed.

S&F PVC (SWR) pipes laid in weep holes 110 mm bore etc complete all as specified and directed.

Dismantling structural steel works in gates, doors etc complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and directed.

S & F 1.6 mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Excavation over areas n exc 1.5 m in depth for foundation and getting out in any type of soil etc complete all as specified and directed.

Excavation over areas exc 1.5 m in depth but n.exc 3.00 m depth for foundation and getting out in any type of soil etc complete all as specified and directed.

M&L for RCC M-30 design mix concrete in Foundations, including rafts, footings, foundation beams, plinth beams; bases for columns; etc; basement slabs; under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for RCC M-30 design mix for Columns, pillars piers post and struts & walls etc complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations and plinth beams and similar works vertical or to batter for flat and fair finished surfaces etc complete all as specified and directed.

Use and waste of formwork to side pillars, posts, struts, piers, columns and stanchions for square, rectangular fair finished surfaces all as specified and directed.

S & F CRS bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bonding with and including mild steel wire (Annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

All as per Item No 43.00 above but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders etc complete all as specified and directed.

S & F aluminium rectangular hollow section for grid suspension ceiling system fixed to mild steel roof truss with stainless steel screws for fixing of aluminium composite panels including joining cleat, screws etc complete all as specified and directed.

Supply and fixing suspended false ceiling and vertical cladding using (ACP) Aluminium Composite Panel sheet 3mm thick to aluminium framework complete all as specified and as directed. Note: Aluminium framework will be measured under item No 45.00

Excavating over areas, n exc 1.5 m deep and getting out in soft disintegrated rock etc complete all as specified and directed.

Excavating over areas, exc 1.50 m depth but n.exc 3 m depth and getting out in soft disintegrated rock etc complete all as specified and directed.

Excavating over areas, n.exc 1.50m depth and getting out in hard rock etc complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 20mm graded aggregate) as in drain,filling and mass concrete complete all as specified and directed.

M&L for walling random ruble masonry,uncoursed,well bonded,bedded and solidly hearted, built in cement and sand mortar (1:6) complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints,as specified,of random rubble walling,with maximum depression on face from straight edge 20mm held against the dressed surface etc complete all as specified and directed.

M&L for rendering 20mm thick in CM 1:4 as stone masonary surface making surface fair & even without using extra cement etc complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 120 cm inner girth in cement concrete,using extra cement,including forms, moulds,mi-tred/stopped ends etc and complete all as specified and directed

Dismantling existing false ceiling board alongwith grid system etc complete all as specified and directed

M & L for 18-20 mm thick machine cut and prepolished kota stone slab as in skirting,dado etc including 10 mm backing coat in CM 1:4 complete all as specified and directed

M&L ciruit wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn in and including PVC conduit with 1.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Note : Circuit wiring will be made in Hangers/Sheds, height up to 10 Meters only.

Supply & Fix MCB DB Double Door SPN 4 way 240 volts, including cutting chases in wall, concealing the DB in wall, making good the distrubed surfaces and making connections complete.

S & F MCB SP 06 A 240 V , C Curve complete all as specified and directed.

S & F MCB SPN, 240 volt, 32 Amps, 10 KA, C Curve complete all as specified and directed.

S & F LED 24 Watt False ceiling fitting confirming to cat no LCBOR-24-CDL of Crompton or Equivalent From Philips/Bajaj complete all as specified and directed.

Supply and lay UG armoured 4 Core 10 Sq mm Aluminium multi stranded conductor cable suitable for 1100 volts grade heavy duty including saddling complete all as specified and directed.

M&L for sand cushioning by spreading in trenches fine dry river sand by gently by punning down manually as in cable protection complete all as specified and directed.

Supply and laying reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches complete all as specified and directed.

S& F in replacement of GI steel tubing medium grade 40mm dia for laying in ground, along the pole in coping, road crossing etc for cable protection including necessary fittings , clamps for supports, etc complete all as specified and directed.

M&L for cutting existing road/hard standing not exc 45x45 cm in wide & depth getting out excavated material for laying cable /GI tube, returning filling & well ramming watering finish surface 10 cm from top using PCC 1:3:6; including removal of surplus soil complete all as specified and directed.

Supply and fix in repair of Cable junction box IP 66/69 "weather proof" (with knockouts for cable entry) box of size 130 x 180 x 77 mm with connector/terminal, Din Rail, GI clamps made out of GI flat of size 25 mm X 3 mm channel including providing detachable GI 3 mm thick plate inside looping box as cable gland plate and including cable glands as required at size and making connections complete all as specified and directed. Confirming to Cat No KF 1010B of Hensel or equivalent to Sintex or National.

Taking down copper/ aluminum point wiring surface type, concealed type (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc complete all as specified and directed.

M & L for point wiring with PVC insulated FRLS unsheathed 1100 Volts grade single core multistranded copper conductor ISI marked cable 1.5 Sqmm drawn in and including casing-caping and accessories, fixed on wall / ceiling etc with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws etc complete all as specified and directed for one light / fan / bell point controlled by one switch.

All as per Item No 69.00 here-in-before but for one 5A 2pin/3pin socket out let multipurpose on the same board with other switches etc complete all as specified and directed.

All as per Item No 69.00 here-in-before but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board etc complete all as specified and directed.

All as per Item No 69.00 here-in-before but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board etc complete all as specified and directed.

S & F Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volts etc complete all as specified and directed.

S & F Bell push flush type 5 amp, 250 Volts etc complete all as specified and directed.

S & F Ceiling Rose, surface bakelite, three terminals, AC, 230 Volts etc complete all as specified and directed.

S & F Switch Socket combination 2 in 1, 5 Amps, 5 pin multipurpose, flush type, 230 Volts etc complete all as specified and directed.

S & F Switch Socket combination 5 in 1, 15 Amps, 6 pin multipurpose, flush type, 230 Volts etc complete all as specified and directed.

S & F Ceiling fan regulator electronic stepped type, AC, 230 Volts, flush type etc complete all as specified and directed.

Supply and fix bell ding dong AC 230 V single pole etc complete all as specified and directed.

S & F in repairs MCB DB 8 way SPN, double door, vertical type, IP - 43 with 200 Amps rated bus bar, AC and connecting up etc complete all as specified and directed.

S&F LED tube light fitting suitable for 4' (including LED Tube Rod 1 x 20 W), 230V Decorative box type fitting, powder coated top cover, with bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and PVC square blocks for fixing LED Fitting etc complete all as specified and directed.

Supply and fix decorative recessed type LED light fitting 35/36 watt (size 2'x2') and including driver unit, including provision of 3 core copper flexible cable 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements etc complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers all as shown in Electrical Plate No.3 connected to earthing test point all as specified or indicated including testing on completion etc complete all as specified and directed.

M&L for sub main wiring with two run single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC Conduit with ISI Marked not less than 25 mm dia and including one run PVC insulated 4 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed including taking down of old sub main wiring etc complete all as specified and directed. Note : Two Run of 4.0 Sqmm Wire, one run of earth wire PVC Conduit will be measured and paid one unit.

Taking down carefully including servicing and refixing of same Window type AC 1.5/2.0 TR and connected items including testing etc complete all as specified and directed.

S&F in repairs single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall etc complete all as specified and directed.

Taking down carefully and Re-fixing of the same ceiling fan 1200mm sweep including provision of cable from ceiling rose/ conductor to fan and spray painting of ceiling fan with two coats of synthetic enamel paint, after preparation of surfaces, etc complete all as specified and directed.

Refixing of Buildinhg Security Light of any watt complete including testing etc complete all as specified and directed. Note : A sum of Rs 41,849.00 towards sch of credit shall be deducated to arrive the contract sum.

Parmatma Enterprises

M/s Hari Om Construction

Joy builders

Vishal Builders