Procurement of consumables of Reverse Osmosis System

Amount

Water line service kit with housing/flask, membrane 10” sedimentation filter, pre carbon filter post carbon filter.

Spun filter element 20” x 2.5” four-layer spiral wound 270gm, 5 microns.

Spun filter element 10” x 2.5” four-layer spiral wound 135gm, 5 microns.

RO Water purifier cabin with 12 Ltr capacity tank, 3/8” tap, tank top lid, float with switch, filters housing clamps, back cover and water in/out sockets.

Electrical service kit Booster Pump 100 GPD 24V DC Motor 230V AV/24V DC, 2A SMPS Adopter, 24V Solenoid valve for RO Water.

Membrane element 40” length, 4” dia CPA 2-4040 for industrial RO Water purifier with housing for 50 LPH

Vertical high-pressure pump for 250LPH, RO Water purifier plant type: CRI-MVC 2-11

Raw water pump set-Mono block self-priming pump having 1” dia plunges with 0.5HP

20” spun housing: Spec: Length: 20 inches, Outer Diameter: 2.5 inches, Type: Polypropylene (PP), Flow Rate Capacity: Approx. 3000 – 4000 LPH (Liters per Hour), with wall-mounting bracket

20” filter housing clamp: Spec: V-band clamp / SS clamp ring, Stainless Steel, approx. 4.5” to 5.0” depending on housing wall thickness, Thickness: 1.5 mm to 2.0 mm.

10” spun housing: Spec: Length: 10 inches, Outer Diameter: 2.5 inches, Type: Polypropylene (PP), Flow Rate Capacity: Approx. 3000 – 4000 LPH (Liters per Hour), with wall-mounting bracket

High pressure switch: Spec: Pressure range: 6 to 30 kg/cm², contact type: SPDT (Single Pole Double Throw) electrical switch, IP65 Rated (splash and dust resistant), 5A @ 250V AC / 2A @ 24V DC (typical).

Low pressure switch 250LPH: Spec: Pressure range: 0 to 3 kg/cm², contact type: SPDT (Single Pole Double Throw) electrical switch, IP65 Rated (splash and dust resistant), 5A @ 250V AC / 2A @ 24V DC (typical).

Float 250LPH: Spec: Type: Mechanical Float Valve (non-electric), Capacity: Suitable for RO output up to 250 Liters Per Hour, Mounting type: Horizontal or vertical side wall mount inside storage tank, Material: Food-grade Polypropylene (PP).

Flow Meter 250LPH: Spec: Rotameter (Variable Area Flow Meter), 0–250 LPH (Liters Per Hour), Acrylic / Polycarbonate, Float material: Polypropylene (PP).

12LPH float dolphin model: Spec: Mechanical Float Valve, Body: Food-grade Polypropylene (PP), Float material: Hollow plastic corrosion-resistant.

12LPH float grand model: Spec: Mechanical Float Valve, Body: Food-grade Polypropylene (PP), Float material: Hollow plastic corrosion-resistant.

Pressure gauge panel type: Spec : Type : Analog (Bourdon tube) Pressure Gauge, Panel Mount Type, Size : 2.5”, Pressure range : Common: 0–7 bar / 0–10 bar / 0–16 bar / 0–21 kg/cm², Mounting type : Back flange panel mount, Pressure medium : Water & air, Window : polycarbonate or glass, glycerin filled with ±1.6% or ±2.5% of full scale accuracy. Rubber gasket/seal ring for leak-free panel installation

Pressure gauge online type: Spec : Type : Analog (Bourdon tube) inline Pressure Gauge, Size : 2.5”, Pressure range : Common: 0–7 bar / 0–10 bar / 0–16 bar / 0–21 kg/cm², Mounting type : Bottom connection (direct inline mounting), Pressure medium : Water & air, Window : polycarbonate or glass, glycerin filled with ±1.6% or ±2.5% of full scale accuracy. Rubber gasket/seal ring for leak-free panel installation.

New Generation Water Solution (BID ID -880214)