GE (W)/HSR-28/2024-25 PROVN OF CERTAIN REVENUE WORKS AND MINOR WORKS

Amount

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed.

S&F hollow PVC wall panelling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, including PVC 'L'and U section for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls including dismantling old panelling /lining etc. complete all as specified and directed.

M&L, 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone including rubbing & polishing complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L brick work with Sub Class 'B' bricks straight or curved on plan exc 6.0m mean radius built in cm 1:4 complete all as specified and directed.

M&L Brick work with old size fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Discription all as per item No 8.00 above here in before but except bricks complete all as specified and directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in , built in cement mortar 1:4 complete and all as specified and directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removal rubbish outside MOD land ect complete all as specified and directed .

M&L, 15mm thick rendering in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth without using extra cement. etc complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:4 to brick/concrete wall surfaces trowelled to even & smooth without using extra cement. etc complete all as specified and directed.

M & L two coat of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed .

M & L two coat of colour wash over a coat of primer on new surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L Rendering 10 mm thick on ceiling surfaces in CM(1:3) finished even and smooth with out using extra cement complete all as specified and as directed.

M & L two coat of oil bound distemper with on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M & L two coat of oil bound distemper over 2 mm thick putty on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L two coat of oil bound distemper over 2 mm thick putty on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L two coat of Weather coat paint over a coat of primer on new surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L two coat of Weather coat paint over a coat of primer on old surfaces of walls including preparation of surfaces complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid separately.

S&F Anodised aluminium door shutters/partition ,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid separately.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Anodised Aluminium powder coated of any colour deco grill of 6 mm dia (powder coating not less than 50 micron) all as specified and directed at site complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality fixing with aluminium cleat n.exc 0.5 sqm each pane complete all as specified and directed.

S&F sheet glass 4.8 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed.

S&F in Repairs Curtain Rod SS body Decorative pattern as approved by Engr in Charge complete all as specified and directed.

S&F in Repairs Curtain Rod Bracket decorative patterr approved by Engr in Charge complete all as specified and directed.

M&L for 75 mm cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete complete all as specified and directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M & L, vitrified ceramic tiles 10mm thick light shade (square or rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 10mm thick cement sand screed in CM 1:6 complete all as specified and directed.

M&L for Vitrified ceramic tiles (light shade) 10mm thick (square /rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm. in skirting etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L washed stone grit plaste on exterior walls in two layers, under layer 12mm thick cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement:1/2 coarse sand:2 stone chipping 10mm nominal size) in panels with glass strip of size 15mm wide and 15mm deep in the top layder of washed stone grit plaster, all round as per approved pattern including scrubbing, grinding and washing, the top layer with brushes, grinding machine and water to expose the tone chippings complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified and directed.

Supply & Laying of CPVC pipe, SDR 11 ,20mm outer dia & fittings on walls/ceiling or laying in floors, including taking down old pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store complete all as specified and directed.

Supply & Laying of CPVC pipe, SDR 11 ,16mm outer dia & fittings on walls/ceiling or laying in floors complete all as specified.including taking down old pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

Taking down eaves gutter or RWP of any description, Including fittings complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement including demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius including demolition of floor and taking down old bends and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single,(Single T) equal or unequal including demolition of floor and taking down old Single 'T' and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including demolition of floor and taking down old pipe and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including demolition of floor and taking down old pipe and making good floor with matching floor in all respect complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement with exiting pipe including demolition /dismantling of old gully trap complete all as specified and directed.

S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore with/without access door any radius complete all as specified and directed.

S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified and directed.

S&F PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as specified and directed.

S & F in repair one piece EWCs 'S' trap size 710x370x810 mm Ivory colour with 10 ltr flushing cistern, seat cover, twin flush fittings including necessary material for fittings & making good to floor complete all as specified and directed.

S&F in Repairs Table top Wash hand basin decorative pattern including bottle trap and wastcuppling all necessary fittings complete all as specified and directed.

S & F in repairs Fancy type Quarter turn (Cera Delta) angle cock with wall flange complete all as specified and directed.

S & F chromium plated Toilet paper holder complete all as specified and directed. Make :- Cera or equivalent

S&F 15 mm bore Brass CP Central hole Basin Mixer without Pop-up, fixed to iron pipe complete all as specified and directed. Series Mist Cat No:8550 Prayag (Make: Prayag,Jaquar,Cera)

S&F chromium plated 15 mm dia two way bib tap complete all as specified and directed. Make : Jaquar or equivalent

S&F chromium plated Health Faucet with 1.50mtr tube & Hook any description including flexible attachment Make Prayag or equivalent Cat No:BEA-41 Prayag (Make: Prayag,Jaquar,Cera)

S&F chromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F glass self of any type 300 mm long complete all as specified and directed.

S&F Bevelled edge decorative type Mirror of size 1500x600 mm fixed with 02 Nos cromium plated stud complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete all as specified and directed. Make prayag

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed.

S&F in Repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in Repair Towel Rail 600mm long of chromium plated fixed and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S& F inrepair Towel Ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S& F corner shelf of CP fixed with and including Chromium plated brass screws (Minimum weight 300gms) complete all as specified and directed.

S & F full stall urinal Ivory colour with fittings waste pipe and bottle trap etc including necessary material for fittings & making good to wall complete all as specified and directed.. Make :- Cera or equivalent.

&F 18 mm thick PVC solid board for partition, door & cupboard/shutters complete all as specified and directed. Make : Rajshri or equivalent

S&F self clossing hinges hinges 75 mm long complete all as specified and directed

S& F Magnet lock 30 mmm long complete all as specified and directed.

S& F 100 long SS fancy type handle complete all as specified and directed.

Dismantling of existing Jafri wall complete all as specified and directed.

M&L Formwork of edges of concrete falts, roofs and sides of RCC bands in walls and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M&L RCC M-20 (Nominal Mix) in slabs supported on walls, beams and columns complete all as specified and directed.

M&L mild steel round bars 10mm dia and over, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Gde E-165 (Fe-290) complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L rough cast plaster as specified (rendering coat not less than 10mm thick in CM 1:3 while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate size 6to12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even on external wall upto cill height complete all as specified and directed.

M&L of precast cement concrete louvres and jallies, 25mm thick Type Bo 1:2:4 (12.5mm graded aggregate) (measured solid), including all mould but excluding frame Set in CM 1:4 in repair, complete all as specified and directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep for foundation etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, and removing surplus soil to a distance n.exc 50 m in soft/ loose soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Removing excavated material n.exc 250 m but n.exc 500 m and depositing where complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed.

S&F framed brackets of angle or tee with web and flangs binding welding as necessary gusset plates as in Hold fast, Fe-290, Gde -E-165 complete all as specified and directed.

M&L Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick (in tranches and surface), watered and rammed to a true surface with broken stone or boulders complete all as specified and directed.

Providing, cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L of cement concrete type B1 1:2:4 (40 mm graded aggregate) complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (40 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

S&F Factory made mild steel window with side hung shutter (Box type) without glazing bars to receive wire guage, dovetailed or welded with and including necessary welding, reveting, tower bolt, handle, holdfast, & hinges and peg stay as per Drg No CEJZ/TD-2013/01 sheet (1/3,2/3,3/3) complete all as specified and directed.

S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S&F framed work such as grills, Gates, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165 complete all as specified and directed.

M&L for Framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. grills, gratings, etc.. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L RCC M-25 as in lintel beam, band, Chajja etc complete including formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe , internal dian of pipe is 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for PCC (1:4:8) using 20mm graded stone aggregate Concrete bed to drain pipes of size 200mm dia including packing under and completely surrounding pipes with concrete after they are laid andn tested complete all as specified and directed.

M&L for 200mm dia , Reinforced concrete pipes, class NP 3 with one collar per length of pipe including pcc bedding, hauching etc and demolition / dismantling of old pipe complete all as specified and directed.

M&L Reinforced cement concrete nominal mix, Type B0 1:2:4 (12.5mm graded aggregate) as in cover slab etc complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, pointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever equired complete.

S&F MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc, flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long Dia meter of Shank 5 to 10 mm complete all as specified and directed

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

All as per item No 124.00 but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

All as per item No 124.00 but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

All as per item No 124.00 above but point wiring with 2.5 sq mm single core FR cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F modular fan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equivalent in Philips, Havells.

S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 32 Amps, B-curve, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, B-curve, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Philips, Wipro.

Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion, all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supply & fixing sheet metal enclosures with socket plug top and MCB single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amps rating 240 volt complete all as specified and directed.

Balaji Construction Co. (BID ID -3050717)

Shiva Constructin Co. (BID ID -3058706)

moti construction company (BID ID -3051994)

Siya constructions (BID ID -3051732)