Supply and fitting of 2 No 150 Cs Y-body 4 No. 150 Cs and 01 No. 60 Cs syphon Bend supports 04 No 150 Cs pump foundations at Pump House JF-2, 02 No. 150 Cs MS Delivery Pipe 04 No. 150 Cs Syphon bend support 02 No. 150 Cs and 5 No. 12 Cs pump foundati

Amount

Supply and fitting of Y body (including Motor stool and base plate) of MS sheet IS 2062 grade Fe-410 WA with minimum 10mm thickness - suitable for existing 150Cs VT axial flow pump (P11, P14-MG side) having lift approx 21ft as per sample and site requirement, should be epoxy coated inside and outside with two coats of anticorrosive paint, provided with flanged joint to permit easy assembly and dismantling of pump at pump house JF2.

Supply & Fixing of 150Cs MS syphon bend support (P4, P5, P8, P10-MG side) as per existing design & site requirement, should be painted with two coats of epoxy paint at pump house JF2.

Supply & Fixing of 60Cs MS syphon bend support (P1 JLN side) as per existing design & site requirement, should be painted with two coats of epoxy paint at pump house JF2.

Providing and fixing of foundation for 150 Cs VT pump by making required size/length at site from ISMB of size 500x200mm - approx 4600 mm length - 02 nos (Make - Tata/ Jindal/Sail/Vaizag). One end of this ISMB sections shall be grouted into the wall by making arrangement of PCC block of suitable size as per the weight of Pump. While other end should be welded/bolted to the existing ISMB 600x210mm with the help of L- bracket and nut/bolts/washers. Including material and labour for applying primer and two coats of epoxy paint on the complete foundation and labour charges for taking out old rusted foundation (P3 JLN side, P11 P12 P13 P14 - MG side) at pump house JF2.

Supply & Fixing of delivery pipe with minimum thickness of 10mm of sheet MS IS-2062 Grade Fe-410 WA, length of delivery pipe 20±2 feet and OD 50±1 inch for 150 Cs Pump, should be epoxy coated with anticorrosive paint (Two coat) along with flanges (as per existing Syphon Bend and Y-body of pump) as per site requirement (P4, P6) at pump house JC1.

Replacement of 150Cs MS syphon bend support (P2 P4 P6 - JC1 & P3 JC2) as per existing design, size & site requirement, should be painted with two coats of epoxy paint at pump house JC1 & JC2.

Providing and fixing of foundation for 150 Cs VT pump by making required size/length at site from ISMB of size 500x200mm - approx 4600 mm length - 02 nos (Make - Tata/ Jindal/Sail/Vaizag). One end of this ISMB sections shall be grouted into the wall by making arrangement of PCC block of suitable size as per the weight of Pump. While other end should be welded/bolted to the existing ISMB 600x210mm with the help of L- bracket and nut/bolts/washers. Including material and labour for applying primer and two coats of epoxy paint on the complete foundation and labour charges for taking out old rusted foundation (P1, P5) at pump house JC2.

Providing and fixing of foundation for 12Cs VT pump by making required size/length at site from ISMB of size 300x140mm - approx 4800 mm length - 02 nos (Make - Tata/ Jindal/Sail/Vaizag). One end of this ISMB sections shall be grouted into the wall by making arrangement of PCC block of suitable size as per the weight of Pump. While other end should be welded/bolted to the existing ISMB 600x210mm with the help of L- bracket and nut/bolts/washers. Including material and labour for applying primer and two coats of epoxy paint on the complete foundation and labour charges for taking out old rusted foundation (P1, P2, P3, P4, P5) Bhurthal Disty pump house JC2.

The above rates are inclusive of all kind of taxes including GST and other expences like F.O.R. destination and inclusive of all incidental charges, enroute & at destination. Nothing extra shall be paid separately. Terms & Conditions as mentioned in Bid document in Price Schedule.

Sahil Engg. Works