Madurai District in Construction of Community Hall in Kallanai village and Kallanai Panchayat at Kallikui Panchyat Union

Amount

Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary.

Supplying and filling in foundations and basement with filling M sand in layers not exceeding 15 cm. thick, well watered ,rammed and consolidated etc. complete complying with standard specifications.

Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Basement filling for Conveyanced Earth filling complying with standard specification for filling in foundation and basement., etc. complete.

Brick work in cm 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 cu.cm including cost and conveyance of all materials to site and all labour charges etc complete.

R.C.C 1:1.5:3 mix using 20 mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete

Supplying and fabrication of steel rods including cost and conveyance of steel as per std specification etc., complete.

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam, coloum,sunshade etc complete.,

Weathering course with broken brick jeely for 20 mm size mixed with pure slacked lime (no sand to be used) in proposation of 32:12.5 cft to proper gradient,well beation with wooden beaters etc

Finishing the top of roof with one course of machine Pressed tiles of size 20 cm x 20 cm x 20 mm of approved quality laid in cement mortar 1:3 mix to 12 mm thick mixed wit water prrofing compound confirming to ISS by 2% widtht of cement used and te joint

Paving the floor with Stain free nano polish vitrified tiles of approved quality and colour of size 600 mm x 600 mm x 8 mm of approved make, quality and colour in all floors over a base layer of CM 1:3, 20mm Tk and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per the colour & quality of tiles should be got approved.

Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete

Supplying and painting the walls with two coats of putty of 3mm tk over the Exposed RCC Surface of celing inculding Finishing the Joints Smotthy with Grinding machine and the surface shall be througly cleaned out of dust and scrubbing the surface shall then be allowed to dry for atleast 48 hours it shall then be sand papered (Water abrasive sheet) to given a smooth and even surface.Any unevenness shall be made good by applying 1st coat of putty mixed with waterof entire surface inculding filling up undulations and applying 2nd coat of putty and then sand papering water (Waterproofing abrasive sheet) the same after dry and finishing the surface smoothly etc complete complying with standard spaecifiactions and as directed buy the departmental officers

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Fabrication and supply of mild Steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc. Door 1.80 x 2.10m

Door 1.20 x 2.10 m

Fabrication and supply of mild Steel window of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc. window 1.20 x 1.30m

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Plastic emulsion paint two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( outer wall )

Painting two coats with enamel paint over new iron work including cost and conveyance of all materials to site and all labour charges etc., ocmplete

Towards the labour charges for fixing of Door including all materials and labours charges etc.

Towards the labour charges for fixing of window's including all materials and labours charges etc.

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD25)

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box (Power Plug Point SD 38)

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 68

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 142

Supply and fixing of single box type Compact flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of LED Tube Light [SD 88 ]

Supply and fixing of water tight Bulk Head fitting with guard (Philips / Bajaj / Crompton / Klite) suitable for incandencent lamp and 60W bulb (SD 79)

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Provision For Name Board Charges

Provision For Photo Charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

V SAKTHIVEL (BID ID -1532163)

ERULAPPAN R (BID ID -1532014)

RAMAMOORTHY K S (BID ID -1532080)

Muthumari Sundram (BID ID -1528661)

M ELANTHENRAL (BID ID -1532147)