Balance Allied Works for Court

Amount

400 Kva Servo Transformer

100 Kva Servo Transformer

“SITC of silent DG set” comprising of Engine Cummins/ Kirloskar/Mahindra /Caterpillar/ Cotton Greaves/Ashoka Leyland/scania/ vlovo ,Make, stationary type, Liquid Cooled, turbocharged after-cooled developing suitable BHP under NTP condition and conforming BS:5514/ISO3046 ISO 8528 & DIN 6271 and Alternator Stamford / Kirloskar / Crompton Greaves/ Make brushless, self excited, self regulated conforming to IS 4722 for continuous operation & generating at 1500 RPM, 415volts, 0.8 power- factor , 50Hz, 3 phase. The set shall have Microprocessor /relay based AMF control Panel. The Engine and Alternator would be duly aligned and coupled with each other on the common MS fabricated base frame. The sound attenuating system of Silent DG Set shall conform to stringent MOEF/CPCB norms of noise level up to 75db at 1 meter distance. The set shall also have inbuilt fuel tank and Batteries , including RCC plate form & suitable size of cable as required completye job.

250 KVA DG Set

100 KVA DG Set

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm

ISI marked fire extinguisher Mech. Foam type capacity 50 litres with gunmetal cap and nozzle, trolly mounted and complete in all respects including initial fill.

Providing & fixing cast iron foot valve complete with flange.- 150mm dia.

Supplying installation, testing and commissioning of LED new Generation, post-top, energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminum landscape luminarie with high power LED's as light sources of minium 35 watt Make:- Havells (Model:- CORALPT35WLED830PSYMTOPC) or equivalant make and model as per approved make list attached herewith .

Supplying and Laying of 1 No. DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refelling the Trench Etc.as Required .

OUTGOINGS i) MCCB 63 Amps 4 P with Breaking Capacity 16 KA (3 Nos) v) Load Bearing Members to be made out of 2.0 mm CRCA Sheet. vi) Partitions to be made out of 1.6 mm CRCA Sheet & Gland Plates to be 3.0 mm Thick.

SITC of wall mounted 3 star Split Air-conditioning Unit of capacity 2.0 TR Hot & cold ( Blue star, Carrier, Daikin ,Voltas ,Sumsang , LG and Hitachi or equivalent make)

SITC of wall mounted 3 star Split Air-conditioning Unit of capacity 1.5 TR Hot & cold ( Blue star, Carrier, Daikin ,Voltas ,Sumsang , LG and Hitachi or equivalent make)

SITC of wall mounted 3 star Split Air-conditioning Unit of capacity 1 TR Hot & cold ( Blue star, Carrier, Daikin ,Voltas ,Sumsang , LG and Hitachi or equivalent make)

SITC of Refrigerant copper piping suction & discharge including insulation for wall mounted 2 TR/ 1.5TR/ 1 TR units.

SITC of PVC insulated electrical copper cable 4 core 2.5mm sq unarmored of suitable specification ( ISI)

SITC of drain pipe 25mm including all accessories as required ( Kitec, supereme , finolex or equivalent )

SITC of MS Stand powder coated for outdoor Unit for all the AC's

SITC of PVC duct liner for covering of copper pipes

Supply, installation, testing & commissioning of IP BOX 128 Line

Supply, installation, testing & commissioning Junction Box 50 Pair

Supply, installation, testing & commissioning Junction Box 100 Pair

Supply, installation, testing & commissioning Cron 10 Pair

Supply, installation, testing & commissioning Rozer Box

Supply, installation, testing & commissioning Cable 4 Pair

Supply, installation, testing & commissioning cable 10 Pair

Supply, installation, testing & commissioning cable 20 Pair

Supply, installation, testing & commissioning cable 50 Pair

Supply, installation, testing & commissioning Telephone Headset with caller ID

Supply, installation, testing & commissioning Telephone Headset

supply ,Installation Testing & commissioning of Giga Switch 48 Port

supply ,Installation Testing & commissioning of Giga Switch 24 Port

supply ,Installation Testing & commissioning of Giga Switch 8 Port

supply ,Installation Testing & commissioning of Cable Manager

supply ,Installation Testing & commissioning of Patch Panel 24 Port

supply ,Installation Testing & commissioning of Patch Cord 1 Mtr

supply ,Installation Testing & commissioning of Patch Cord 3 Mtr

supply ,Installation Testing & commissioning of complete I/O Box

supply ,Installation Testing & commissioning of Dynamic Rack 9U Full Loaded

supply ,Installation Testing & commissioning of Dynamic Rack 12U Full Loaded

supply ,Installation Testing & commissioning of UPS 1 KVA

supply ,laying ,Testing & commissioning of CAT-65 UTP CABLE

Supply , instalation ,testing & commissioning of NVR 64 CH

Supply , instalation ,testing & commissioning of Hard Disk 10 Tb

Supply , instalation ,testing & commissioning of Dome Camera

Supply , instalation ,testing & commissioning of POE Switch Giga 16 CH

Supply , instalation ,testing & commissioning of POE Switch Giga 8 CH

Supply , laying ,testing & commissioning of CAT 6 Cable

Supply , instalation ,testing & commissioning of Samsung LED 50 Inch

Supply , installation ,testing & commissioning of Amplifier

Supply , installation ,testing & commissioning of Mic Corded

Supply , instalation ,testing & commissioning of Mic Cordless

Supply , instalation ,testing & commissioning of mic Stand

Supply , instalation ,testing & commissioning of Spliter

Supply , instalation ,testing & commissioning of Speaker Roof.

Supply , instalation ,testing & commissioning of Out Door Speaker

Supply , instalation ,testing & commissioning of wall Speaker

Supply , instalation ,testing & commissioning of PVC conduit 25 MM with Tee , bend Junction Box as required ( Heavy Duty) complete job

supply ,laying ,Testing & commissioning of CABLE 23/36

Supply, installation, testing and commissioning of Photo Smoke Detector.

Supply, installation, testing and commissioning of Manual Call Box.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc including form work etc as required

Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels

Providing cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,16KA,FPMCCB

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and Laying of 1 No. PVC/XLPE insulated and PVC Sheathed /XLPE Power Cable of 1.1 KV Grade Armoured of Following Sizes in the existing RCC/ Hume /DWC/Stone ware/Metal / HDPE Pipe as Required.

cable 120 sq. mm 3.5 core A2XFY

cable 50 sq. mm 3.5 core A2XFY

SITC of horizontally centrifugal end suction pump complete for delivery 1620 ltr/ min against a total head of 56mtrs. With 40 HP three phase motor with speed of 1500 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standardspecification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.

1620 lpm at 56 m Head

SITC of horizontally centrifugal end suction pump complete for delivery 180 ltr/ min against a total head of 56mtrs. With 12.5 HP three phase motor with speed of 1500 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

25 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required

100 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

Pendent Sprinkler

Surface mounted Concealed sprinkler

Nipple & socket fr sprinkler system

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required

100mm dia

150mm dia

Supplying and fixing single headed internal / External hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/ Stainless Steel cap and chain as required :

Single headed Stainless steel

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket. 30 mm

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 100 mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required

Stainless Steel (Grade 304)

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Stainless Steel (Grade 304)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet and outlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

4 way - 150 mm dia M.S. Pipe inlet

2 way - 100 mm dia M.S. Pipe outlet

Providing and fixing electricaly operated flow indicating switches model System Sensor in sprinkler branch line on each floor with necessary junction box installed in accessible place (Wiring from switches to panel and stair case pressurisation not included) 100 mm dia

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-14 / sq. cm.

Providing and fixing Fire Extinguishers (A, B, C type powder) complete with all accessories as per manufacturers specifications.

Capacity 6 Kg

Supplying and laying of PVC conduits with junction boxes and necessary tees and bends and S/l of 2x 1.5 +1x1.5 sq mm dia PVC insulated copper for making electrical connection to detectors,hooters and panel etc .

NOTE :- 1) All accessories / apliances / equipments and the entire installation shall be carried out strictly in accordance with the Anexture -B attached to the tender (SBD Page: 10-13). 2) All accessories / apliances / equipments and the entire installation shall be guarantee /warrantee against DLP for a period of 24 months from the successful completion of said job . 3) Measurable quantitiesmay vary at the time of actual execution of the work and shall be allowed as per actual with in the estimated cost.

BLUESPACE TEK

Anchal Associates