Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹32.2 L+₹2.2 L (7.43%)Rejected-Finance | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | L3₹33.1 L+₹3.1 L (10.3%)Rejected-Finance | L3 | Rejected-Finance HIGH BID VALUE | |
| 4 | L4₹33.5 L+₹3.5 L (11.7%)Rejected-Finance | L4 | Rejected-Finance HIGH BID VALUE | |
| 5 | L5₹33.6 L+₹3.6 L (12.2%)Rejected-Finance | L5 | Rejected-Finance HIGH BID VALUE |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
7 Oct 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
REPAIR MAINT REPLACEMENT TO TILLING ROOF CGI SHEET ROOF TREATMENT CEILING CLADDING AND ALLIED WORK IN CERTAIN OTM AND MD ACCN AT CHINDIT TOP AREA OF AGE BR AND AGE EM UNDER GE 859 EWS
2023_MES_619268_1
8458/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TO TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹60,000
29 Nov 2023
16 Sept 2023
9 Oct 2023
16 Sept 2023
7 Oct 2023
30 Sept 2023
Amount
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for with complete all as specified and directed.”
M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof pad, floorings, including finishing the surface with complete all as specified and directed.”
M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces with finishing the surfaces even & fair without using extra cement .(WPC will be measured and paid separately)
M&L for preparation of new plastered surfaces of roof surfaces and applying waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 kg/Sqm and applying hot bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00mm thick , weighing 3.5 Kg /Sqm with surface finish by torch application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms/ Sqm with complete all as specified and directed.”
S&F in repair 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches with complete all as specified and directed.”
S&F in repair 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches with complete all as specified and directed.
M&L for cleaning and degermination inside of RCC/PVC water storage tanks capacity not exceeding 500 ltrs of any description and in any position comprising following seven stage cleaning and sterilization of water tanks through bacteriological treatment by using Terbac G5/Inchlor-5/NB-10, Terbac G65/Inoxi-60/NB-69 and ultra violet rays complete all as specified and as directed:- (a) First stage is to drain out the water by using exit valve or our own high capacity dewatering system or any other suitable method approved by Engr-in-Charge. (b) Second stage is cleaning all the algae formation inside the tank by using Terbac G 10/Inchior-5/NB-10, a laboratory tested branded chemical of the company and scrubbing the walls of the tanks. (c) Third stage is fresh water cleaning by high speed jet pump with pressure 5 PSI. (d) Fourth stage and first bacteria screening is sterilization by using Terbac G5/Inchior-5/NB-10, a laboratory certified branded halogen compound, test certificate of Terbac G5/Inchior-5/NB-10,from government laboratory mentioning suitability for sterilization shoud be submitted to the office before using for sterilization. (e) Fifth stage is cleaning the floor of the water tank by heavy duty industrial vaccum cleaner. (f) Sixth stage is the second bacteria screening and sterilizing method by using ultra violet ray rejctor covering 360 degree with in the tank and kills all suspended bacteria. (g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent Terbac G65/Inoxi-60/NB-69. NOTE : (i) Test certificate of Terbac G65/Inoxi-60/NB-69 from Government Laboratory mentioning.
Disconnecting existing water tanks of capacity exc 500 ltrs but n exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc with complete all as specified and directed.
Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.
Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.
Supply and Fix 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.
M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one with complete all as specified and directed.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane with complete all as specified and directed.
S&F 3mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane with complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and smooth using extra cement
M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles with complete all as specified and directed.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
Dismantling of floor, hearth or wall tiling including cement mortar bedding with complete all as specified and directed.
M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles .
M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets
S&F in rep 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces with complete all as specified and directed.
S&F in rep 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces with complete all as specified and directed.
M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm with complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Demolition of Reinforced Cement Concrete of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work completed all as specified and directed by Engr-in-Charge.
M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement
Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.
Dismantling of water tanks exc 500 ltrs & n. exc1000 ltrs capacity and removing to store.
S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified
S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in (Make : Sintex/Polycon /Poly Tap )
S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.
S & F in repairs fancy type 20mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.
S & F in repairs fancy type 15mm dia bib tap, CP with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.
S & F in repair chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified.
S & F in repair chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.
M & L 15 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement
Material and labour for 10mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of ceiling finished even and smooth without using extra cement.
M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces with WPC @ 3% by weight of cement finishing the surfaces even & fair.(WPC will be measured and paid separately)
Supply only integral water proofing compound.
M&L for preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of 3mm thick wall care putty all as specified including preperation of surfaces
Preparing newly plastered surfaces of ceilings and applying three coats of white wash with complete all as specified and directed.
M&L for applying Two coats of cement base paint on surfaces of walls over one coat of primer all as specified and directed.
S&F in repair Grating doom 125mm dia with and without wast hole PTMT (Minimum weight 40 grms)
S&F in repair Grating doom 100mm dia with and without wast hole PTMT (Minimum weight 40 grms)
S&F 32mm PVC wast pipe for kitchen sink/WHB with complete all as specified and directed.
S&F PVC wall peneling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm PVC sheet fillet of width 35mm for wall peneling inclusive of fixing on to wall with complete all as specified and directed.
M/S ASHOK CONSTRUCTION
D.P. Traders
M/S Karkies Construction & Co.
mon traders
passang construction
M/S R N ENTERPRISES
M/S TSEWANG ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .