PROVISION OF CERTAIN INTERNAL CONNECTION ROADS TO OFFICERS MD ACCN AT QUEENS GARDEN AREA, PROVISION OF ROAD AT TRG AREA OF MLIRC AND SPECIAL REPAIRS TO CERTAIN INTERNAL ROADS AT RMS, LAXMITEK SF ORs ACCN UNDER GE BELGAUM

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc. 400 sqm and depth exc 50mm and n.exc 100mm all as specified and as directed.

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and directed.

Surface excavation n. exc. 45cm deep and averaging 30cm deep and getting out in hard/ dense soil all as specified and directed.

Removing excavated soil n.exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point in soil all as specified and directed.

Removing excavated soil exc 250m but n.exc 500 m and depositing where directed all as specified and directed.

Rolling and consolidation of formation surfaes in cutting with power roller of capcity exc 8 tonne to 12 tonne all as specified and as directed.

M&L for soling or sub base, 150mm thick spread thickness, with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated by using 8 to 10 ton power roller to required gradient and camber all as specified and as directed.

M&L for WBM, 150 mm thick (compacted thickness) in two layers of each 75mm thick, with granite, trap or basalt aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated by using 8 to 10 ton power roller to required gradient and camber required all as specified and directed.

M&L for WBM, 75 mm thick (compacted thickness) in single layer, with granite, trap or basalt aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required all as specified and directed.

M&L for preparing surfaces of unsurfaced water bound macadam by wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or pneumatic means to remove all loose dirt etc. and applying evenly priming/ tack coat with paving bitumen at 10 kg per 10 sqm all as specified and as directed.

M&L for premix bituminous macadam with 4% binder content (Paving Bitumen), consolidated thickness 75mm or less, laid, rolled and compacted to required gradient and camber all as specified and as directed.

M&L for preparing black top surfaces by wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or pneumatic means to remove all loose dirt etc. and applying evenly priming/ tack coat with hot blown bitumen at 5 kg per 10 sqm all as specified and as directed.

M&L for bituminous pre-mixed semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content (Paving bitumen) by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and as directed.

M&L for providing road marking strips with 2.5mm thick reflective thermoplastic paint of approved make and shade conforming to relevant standards, width not exceeding 100mm, hot applied on bituminous road surfaces all as per manufacturers instructions with automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heaters including necessary preparation of existing road surfaces all as specified and directed.

S&F road studs (Cats-eye) of size 100x90 mm, white or yellow colour, ABS body with reflective glass elements (white or red) in duo directions fixed on road with two component epoxy hardener and resin/ HT nail as per manufacturers instructions all as specified and directed. Make: Sun eye/ 3M/ Protek or equivalent approved make.

M&L for providing pre-cast cement concrete kerbs cast in PCC 1:2:4 type B0, using 12.5mm graded stone aggregate with plain fair faces, including chamfering, set in CM 1:4 with joints to match all as specified and directed.

PATEL CONSTRUCTION