Bifurcation of 11KV Fathenagar Feeder

Erection of pole in position, aligning and setting to work, fixing of cross arms and top clamps, earthing of supports, back filling with earth and stones properly ramming including transport of materials from road side to location excluding pit excavation, for RS Joist, Rail poles Supply & Fabrication of bottom plate with 6mm thichness and for Box poles Supply & Fabrication of Top & Bottom plate with 6mm thichness Box pole 9/10/11 Mtr

Loading of R.S. Joists 175 x 85 mm

Un loading of R.S. Joists 175 x 85 mm

Excavation of pits in hard rock requiring blasting. (other than SS) 11Mtrs PSCC Pole/ Box poles 0.75 M x 0.9 M x 1.95 M

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand, Cement and curing etc. Including the cost of cement

Erection of 11KV 400/200A Conventional type AB Switch including fixing of cross angles and alignment complete

Loading of 11KV AB Switch Conventional type

Un loading of 11KV AB Switch Conventional type

Making 11 KV 3x300 Sqmm Cable Out Door/Indoor end termination

Making of Straight through joints 11 KV 3x300 Sqmm Cable

Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable, Painting of RS Joist on inner phasing with red Oxide before Joining as box pole

Supply of CI eath pipe with 80mm dia,2.0 M Length

Providing of earthing with excavation of earth pit (0.6 x0.6x2.4Mts.) duly filling with bentonite, earth , running of earth wire etc., complete, including cost of bentonite and excluding cost of RCC collar of size 0.75M dia x 0.5 M height

Running of GI eartn flat of size 25X3mm from all metallic parts of channels, AB Switch, HG fuse set, DTr neutral and LT Distribution box and inter connection of earth pits etc complete

Supply of GI Flat 25X3 mm

Transport of iron materials such as R.S. Joists, Rail Poles, fabricated supports, steel, iron, flat, M.S. Channels etc., by lorries. (excluding of loading & unloading ) Above 10 KM and upto 20 KM

Fabrication of materials including 2 coats of Red oxide painting Back clamps with 50 x 6 mm MS Flat

Supply of GI Bolts & Nuts etc

Supply of 4" B Class GI Pipe 100 NB GI Pipe 4.50 mm thickness, 12.1 KG/Mtr

Loading of M.S.Channels, Angles, Flats & Rods etc.,

Un loading of M.S.Channels, Angles, Flats & Rods etc.,

Painting of feeder name on support including cost of paint

Loading of 11KV/33KV XLPE UG Cable for all sizes

Un loading of 11KV/33KV XLPE UG Cable for all sizes

Making of coil earthing pole with 8mm GI wireNut&Bolts for AB Switch

Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)

Supply of GI wire No 8

Painting of R.S Joist,Box poles including cross arms and clamps with two coat of Al.paint including cost of paint and consumables.

Consultation charges for pursuing with various Departments for obtaining required permissions for Road cutting and submission of necessry Documents, Drawings etc.

Wirring, commissioning and testing of Indoor Sub-station switchgear duly conducting the pre commissioning test as per relevent standards & issue of certificate by CEIG authorised

Transport of conductor drums, cable drums, fragile material such as kiosks, VCBs, control panels, Battery Chargers with Batteries, RMU, current transformers, boosters, lightning arrestors, insulators, transformers, meters (which are less in weight and occupy more space) (excluding of loading unloading) Above 10 Km and upto 20 Km with Lorry for each trip

Mass Concreting for pole Coping of 1.5'x1.5'x1 with 1:8 slope Using form boxes (0.031Cumt.)

Supply of RCC cable Joint markers/ Cable route markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , TGSPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand, Cement and curing etc. Including the cost of cement

supply of 4" DWC pipe Mtr. ₹

Loading of 11KV 3 Way RMU/Twin feeder panel

Un loading of 11KV 3 Way RMU/Twin feeder panel

Erection of 11KV 3 Way RMU

Construction of plinth for 3way RMUs etc

Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M height

Formation of Cut point for LT line excluding pole erection and stays for 3/4/5 wire

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand, Cement and curing etc. Including the cost of cement

Along the CC / BT multi layer road requiring compressor 11 KV 3x300 Sqmm Cable

Along the CC / BT multi layer road requiring compressor 11 KV 3x300 Sqmm Cable

Raising of cable on already erected support with wooden / MS clamps and connecting it to over head line with cable jumpers including cost of required wooden cleats, lugs and bolts and nuts through GI pipe (excluding the cost of GI pipe) 11 KV 3x300 Sqmm Cable