REPAIRS TO CERTAIN ROADS BERMS POT HOLES INCLUDING ROAD FURNITURE IN MD ACCN MESSES OTM AREA AT AFS JALAHALLI

Amount

Material and labour for Repair to potholes, any depth not exceeding 1 sqm each including sweeping free from dust and mud, or scoring sunken surfaces in road, paths etc, cutting around edges to at least 25mm in depth making road around by filling in screened a graded road metal, watering and well ramming(including supply of road metal) using power roller of 8-12 tonne capacity and applying evenly a priming/tack coat with bituminous primer @ 6kg per 10sqm using paving bitumen grade VG-10 on top surface all as specified and as directed.

Preparation of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

Material and labour for scrarifying and picking gravelled , macadem or bituminous macadem surfaces in area not exceeding 400 sqm and depth not exceeding 50 mm, all as specified and as directed.

M&L for premix bituminous macadam, (Consolidated thickness 75mm or less ) , using binder content @ 4% binder content by weight of total mix with paving bitumen VG-30 rolled and compacted to required camber & gradient using 8 to 12 tonne capacity power roller laid with mechanical paver complete all as specified and as directed.

M&L for applying evenly a priming/tack coat with bitumen emulsion RS-01 @ 3 Kg per 10 per Sqm on black top surfaces complete all as specified and as directed

Material and labour for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.50% binder content (using bitumen grade VG-30) by weight of total mix, mixed in hot mix plant using design mix, and laid with mechanical paver and rolled and compacted using 8 to 12 tonne capacity vibratory tandom power road roller to achieve the required compactness , to required camber & gradient complete all as specified and as directed.

Material and labour for 150 mm thick (compacted thicknes) WBM, with coarse aggregate of grading 2 (63 to 40mm) or of grading 3 (50 to 20mm size), spread in two layer (75 mm each layer), rolled and consoidated to gradient and camber required with granite, trap or basalt, complete all as specified & directed.

Preparing surface of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and specified all as directed.

Material and labour for moorum / red bajri filling in berms laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering and consolidated to gradient and camber required.

Material and labour for painting 2.5mm thick road marking strips not.exceeding 10 cm width or girth for layout of centre line,dashes, rows, speed breakers, writing letters etc, with thermoplastic road marking paint (reflective) of specified shade or colour by using fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads speser, propane tank heater and profile shoe heater oven by experienced operator on road surface incuding road marking paint spray machine as in lines, dashes letters, arrows etc complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Supply and fixing in repair cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 or equivalent fixed with and incl MS stud of suitable size as per manufactures instructions.

S& F in repair of traffic mirror/ convex mirror size 600mm dia used for blind spots at internal lanes, parking and many more to get a superior view of surrounding area,impact resistant and distortion free,its quality glass, perfect finish, extensive area coverage on the mirror and smooth surface, eco friendly, light weight and come with fixtures FRP is used in making brim and back holding plates, single piece poly carbonate used for greater damage resistance,incl cost of standard fixing,cost of labour and materials etc, complete as per company specification all as per direction of Engr-in-Charge

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

KESHAV ENTERPRISES

MANJUNATHA CONSTRUCTIONS

PATEL CONSTRUCTION